Abstract:The transverse bending and axial compressing mechanical properties of carbon fiber reinforced plastic (CFRP) sandwich laminated square tubes with two kinds of cores, aluminum honeycomb and aluminum foam, respectively, were studied. The failure mechanism and damage processes of the two different CFRP sandwich laminated square tubes were studied by three-point bending and axial compressing experiments, comparing to CFRP hollow laminated square tube. The three-point bending process of CFRP sandwich laminated square tubes were also simulated in ABAQUS/Explicit and the failure mechanism and modes were deeply analyzed. The analytical model of composite laminated box beam using shear-deformable beam theory was extended to calculate the stiffness characteristics of CFRP sandwich laminated square tubes. The variation of bending, axial and shear stiffness in the linear elastic range were predicted. The results show that, after reaching the peak of three-point bending load, the bearing capacity of CFRP hollow laminated square tube reduced greatly due to the buckling instability of the two vertical sides, while that of the CFRP sandwich laminated square tubes were still considerable. A sudden strength damage occurred in the CFRP sandwich laminated tubes under the axial load, and the sandwich panels could slow down the drop of bearing capacity and increase the energy absorption. The load–displacement histories of numerical simulation and experimental result were in good agreement. The differences between analytically calculated and experimental measured stiffness characteristics were within 6.5%. The bending stiffness and axial stiffness of CFRP sandwich laminated tubes are large when the ply angle in the range from 0 to 45 degrees. Compared with the CFRP aluminum foam sandwich square tube, the specific stiffness and specific energy absorption of CFRP aluminum honeycomb sandwich square tube were higher but the energy absorbed was inferior.

Splitting and Curling Collapse of Square Sandwich Metal Tube with Aluminum Foam Core under Axial Low-Velocity Impact

On axial splitting and curling behaviour of circular sandwich metal tubes with metal foam core

Splitting and curling performance of metal foam-filled circular tubes

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Lateral Compression Behaviors of Thin-Walled Equilateral Triangular Tubes

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Experimental Investigation of the Dynamic Responses of Thin-Walled and Foam-Filled Steel Tubes Subjected to Repeated Impacts

Compression behaviour and crashworthiness analysis of aluminum foam filled corrugated and tapered tubes with graded thickness

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

Theoretical Analysis on the Collapse of Dumbbell-Shaped Tubes

Low-Velocity Impact of Clamped Rectangular Sandwich Tubes with Fiber Metal Laminated Tubes

On low-velocity impact response of foam-core sandwich panels

Elastic-plastic response for the foam-filled sandwich circular tube under internal blast loading

Collapse Models of Aluminum Foam Sandwiches under Static Three-Point Bending Based on 3D Geometrical Reconstruction

An Investigation on Axial Deformation Behavior of Thin-Wall Unfilled and Filled Tube with Aluminum Alloy (Al-Si7Mg) Foam Reinforced with SiC Particles

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

Experimental and mesoscopic investigation of double-layer aluminum foam under impact loading

Review of sandwich structures under impact loadings: Experimental, numerical and theoretical analysis

Quasi-Static Axial Compression of Triangular Steel Tubes