Low-Velocity Impact of Clamped Rectangular Sandwich Tubes with Fiber Metal Laminated Tubes

Wang,Zhang,Guo,Yuan
DOI: https://doi.org/10.3390/polym16131833
IF: 5
2024-06-28
Polymers
Abstract:Fiber metal laminated sandwich tubes are made up of alternating fiber-reinforced composite and metal layers. Fiber metal laminated tubes have the advantages of the high strength and high stiffness of fiber and the toughness of metal, so they have become an excellent load-bearing and energy-absorbing, lightweight structure. Due to the complexity of the fiber layup, it is difficult to establish an analytical model of the relevant structural properties. In this work, introducing the number and volume fraction of fiber layup, based on the modified rigid–plastic model, an analytical model is established for low-velocity impacts on sandwich tubes with fiber metal laminated tubes, which provided a theoretical basis for the design of fiber–metal composite tubes. In addition, a numerical simulation was conducted for low-velocity impacts on clamped rectangular sandwich tubes with fiber metal laminated (FML) tubes and a foam core. By comparing the results obtained from the theoretical analysis and numerical calculations, it is shown that the analytical results can reasonably agree with the numerical results. The influences of the metal volume fraction (MVF), the strength ratio factor of the FML metal layer to the FML composite layer, and the relative strength of the foam on the dynamic response of the rectangular sandwich tubes with FML tubes and a metal foam core (MFC) are discussed. It is shown that by increasing the fiber content and fiber strength of the FML tubes and the foam strength, the load-carrying and energy-absorbing capacity of the rectangular sandwich tubes can be effectively improved, especially by changing the fiber properties. In addition, present analytical solutions can be applied to make predictions about the dynamic response of the rectangular sandwich tubes with FML tubes and MFC during impacts with low-velocity and reasonably heavy-mass.
polymer science
What problem does this paper attempt to address?
This paper mainly discusses the dynamic response of sandwich rectangular tubes with fiber metal laminates (FML) under low-speed impact. A modified rigid-plastic model is established to analyze the performance of FML tubes under low-speed impact, taking into account the number of fiber layers and volume fractions, providing a theoretical basis for the design of FML tubes. In addition, the behavior of sandwich rectangular tubes (including FML tubes and foam cores) under low-speed impact is studied through numerical simulation. In the abstract, the authors point out that FML tubes, combining the high strength of fibers and the toughness of metals, have become excellent lightweight structures for load-bearing and energy absorption. However, due to the complex fiber layup, it is difficult to establish analytical models for the relevant structural properties. Therefore, the paper establishes an analytical model to predict the dynamic response of FML sandwich rectangular tubes under low-speed impact and validates it through numerical calculations, showing good agreement between the analytical results and the numerical calculations. The paper also discusses the influence of metal volume fraction (MVF), the strength ratio between FML material layers, and the relative strength of foam materials on the dynamic response of rectangular tubes. By increasing the fiber content, fiber strength, and foam strength, the load-bearing capacity and energy absorption ability of the rectangular tubes can be effectively improved, especially when changing the fiber characteristics. In conclusion, this paper aims to address the analysis and optimization of the dynamic response of FML sandwich rectangular tubes under low-speed impact in order to improve their structural performance and energy absorption ability, providing a theoretical basis for design and engineering applications in related fields.