Abstract:Thin-walled tubes are widely used as energy absorption components in vehicle crashworthiness design where axial crushing is one of the most typical loading conditions. Lightweight materials such as high-strength steel, aluminum and magnesium have been applied for thin-walled tubes for weight reduction. Meanwhile, most of these lightweight materials are more brittle and easily fractured than traditional steel. Distribution and history of stress triaxiality and equivalent strain in the thin-walled tubes under axial crushing have been analyzed in this article with finite element simulation, as these two parameters of stress and strain states are commonly used for constructing fracture locus of materials. It is observed that both stress triaxiality and equivalent strain are transferring along the tube length like waves. Analysis results show that fracture is more likely to take place on the edge than the other positions of square thin-walled tubes. For identical axial crushing stroke, there is little difference of stress and strain states inside the square thin-walled tubes with initial impact velocity varying from 6m/s to 24m/s. Influence of geometrical parameters on the stress and strain states have also been analyzed, including the shape of cross-section corner, the wall thickness and the shape of cross-section, respectively. Analysis results in this article may offer references for design of thin-walled tubes and the necessary experimental characterization of mechanical properties for lightweight materials.

Quasi-Static Axial Compression of Triangular Steel Tubes

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Axial Crushing of Triangular Tubes

Axial Impact Behaviors of Stub Concrete-Filled Square Steel Tubes

Lateral Compression Behaviors of Thin-Walled Equilateral Triangular Tubes

Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Frusta structure designing to improve quasi-static axial crushing performances of triangular tubes

Axial Crushing Behaviors of Multi-Cell Tubes with Triangular Lattices

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

Inward-Contracted Folding Element for Thin-Walled Triangular Tubes

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Axial crushing behaviors of buckling induced triangular tubular structures

Investigation of energy absorption characteristics of circular paper tubes under axial impact loading

Theoretical and numerical study on axial crush of new extruded multi-cell tube

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Collapse Of Tubes Under Combined Bending And Axial Compression Loads

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

RESEARCH ON LOCAL BUCKLING OF DODECAGONAL SECTION DOUBLE SKINNED CONCRETE-FILLED STEEL TUBE SHORT COLUMN