Abstract:Metal/CFRP hybrid thin-walled structures combine low-density and high-strength carbon fibre reinforced plastics (CFRP) with low-cost and stable failure form aluminium, which have drawn increasing attention in the transportation industry. A theoretical model was developed to predict the average crushing force of a hybrid multicell under axial compression. The model captures the main energy dissipation mechanism of the hybrid tube under axial compression, and the average crushing force is determined by a quasi-static compression test. The obtained results show that the average crushing force predicted by the theoretical model is in good agreement with the experimental results. However, the geometry size and configuration of multicell thin-walled structures have important effects on crashworthiness. Therefore, it is necessary to study the parametrization of hybrid multicell tubes. First, the simulation model of the multicell tube is established, and quasi-static experiments verify its accuracy. Second, finite element analysis was used to compare the effects of the geometric size of the cell and the multicell structure of different configurations on the energy absorption characteristics. It is clear that with the increase in the thickness of the large aluminium tube, the specific energy absorption ( SEA ) and crush force efficiency ( CFE ) both show an upward trend. In addition, with the increase in the ply number of the CFRP tubes, the SEA also shows a minor monotonic increasing trend. Finally, various hybrid tubes with different configurations are designed, and the C-C 4 -AL tube (the aluminium tube surrounded by four small-size CFRP tubes being placed inside a CFRP tube.) configuration has the most significant energy absorption ( EA ) and peak crushing force ( PCF ).

Theoretical and numerical study on axial crush of new extruded multi-cell tube

Axial Crushing Behaviors of Multi-Cell Tubes with Triangular Lattices

Mechanical Performance of Multi-Cell Thin-Walled Tubes under Static and Dynamic Axial Loading

An investigation on the energy absorption characteristics of a multi-cell hexagonal tube under axial crushing loads

Axial Crushing of Triangular Tubes

Axial Crushing Theory and Optimization of Lattice-Filled Multicellular Square Tubes

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing

On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Frusta structure designing to improve quasi-static axial crushing performances of triangular tubes

Finite element modeling of the quasi-static axial crushing of braided composite tubes

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Quasi-Static Axial Compression of Triangular Steel Tubes

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Energy absorption and topology optimization of self-similar inspired multi-cell square tubes

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Axial crushing response of carbon/glass hybrid composite tubes: An experimental and multi-scale computational study

Evaluation of crush performance of extruded aluminum alloy tubes based on finite element analysis with ductile fracture modeling