Abstract:The transverse bending and axial compressing mechanical properties of carbon fiber reinforced plastic (CFRP) sandwich laminated square tubes with two kinds of cores, aluminum honeycomb and aluminum foam, respectively, were studied. The failure mechanism and damage processes of the two different CFRP sandwich laminated square tubes were studied by three-point bending and axial compressing experiments, comparing to CFRP hollow laminated square tube. The three-point bending process of CFRP sandwich laminated square tubes were also simulated in ABAQUS/Explicit and the failure mechanism and modes were deeply analyzed. The analytical model of composite laminated box beam using shear-deformable beam theory was extended to calculate the stiffness characteristics of CFRP sandwich laminated square tubes. The variation of bending, axial and shear stiffness in the linear elastic range were predicted. The results show that, after reaching the peak of three-point bending load, the bearing capacity of CFRP hollow laminated square tube reduced greatly due to the buckling instability of the two vertical sides, while that of the CFRP sandwich laminated square tubes were still considerable. A sudden strength damage occurred in the CFRP sandwich laminated tubes under the axial load, and the sandwich panels could slow down the drop of bearing capacity and increase the energy absorption. The load–displacement histories of numerical simulation and experimental result were in good agreement. The differences between analytically calculated and experimental measured stiffness characteristics were within 6.5%. The bending stiffness and axial stiffness of CFRP sandwich laminated tubes are large when the ply angle in the range from 0 to 45 degrees. Compared with the CFRP aluminum foam sandwich square tube, the specific stiffness and specific energy absorption of CFRP aluminum honeycomb sandwich square tube were higher but the energy absorbed was inferior.

On axial splitting and curling behaviour of circular sandwich metal tubes with metal foam core

Splitting and Curling Collapse of Metal Foam Core Square Sandwich Metal Tubes: Experimental and Theoretical Investigations

Splitting and curling performance of metal foam-filled circular tubes

Dynamic Collapse of Circular Metal Foam Core Sandwich Tubes in Splitting and Curling Mode

Splitting and Curling Collapse of Square Sandwich Metal Tube with Aluminum Foam Core under Axial Low-Velocity Impact

Large deflection of rectangular sandwich tubes with metal foam core

Plastic Behavior of Circular Sandwich Tubes Considering the Effect of Local Denting

Analytical and Numerical Investigations of Circular Metal Foam Sandwich Tube under Free Inversion

Expansion of Sandwich Tubes With Metal Foam Core Under Axial Compression

Plastic Behavior of the Foam-Filled Sandwich Beam with Circular Tube Core under Transverse Loading

Lateral Plastic Behaviour of Rectangular Sandwich Tubes Considering Local Denting

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

A Novel Efficient Energy Absorber with Necking-Expansion of Foam Sandwich Tubes

Low-velocity impact of clamped slender rectangular sandwich tubes with metal foam core

Impact Experimental and Theoretical Analyses of Axial Splitting and Curling Metal Tubes with Different Thickness

Large deflection behavior of circular sandwich plates with metal foam-core

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

A Theoretical Study of Low-Velocity Impact of Metal Foam-Filled Circular Tubes

Axial Compressive Collapse of Ultralight Corrugated Sandwich Cylindrical Shells

Analytical and Numerical Investigation on Dynamic Behavior of Rectangular FML Sandwich Tubes with Metal Foam Core under Low-Velocity Impact

Axial crushing behaviors of metal density gradient foam-filled square taper tubes: Analytical model and numerical calculation