Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Deformation and energy absorption properties of cenosphere/aluminum syntactic foam-filled circular tubes under lateral quasi-static compression

Deformation and energy absorption properties of cenosphere-aluminum syntactic foam-filled tubes under axial compression

Bending behavior of cenosphere aluminum matrix syntactic foam-filled circular tubes

Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading

Effect of the cenospheres size and internally lateral constraints on dynamic compressive behavior of fly ash cenospheres polyurethane syntactic foams

Energy absorption characteristics of a foam-filled tri-tube under axial quasi-static loading: experiment and numerical simulation

Investigation on microstructures, compressive properties and energy absorption capacity of carbon nanotubes/aluminum composite foam-filled tubes

An Investigation on Axial Deformation Behavior of Thin-Wall Unfilled and Filled Tube with Aluminum Alloy (Al-Si7Mg) Foam Reinforced with SiC Particles

Expansion of Sandwich Tubes With Metal Foam Core Under Axial Compression

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

An investigation into low-velocity impact behavior of functionally graded treated and untreated cenosphere-based syntactic foams

Braided-textile reinforced thin-walled conical tubular structures: Designing, manufacturing and testing

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

On axial splitting and curling behaviour of circular sandwich metal tubes with metal foam core

Mechanical Response of the Fly Ash Cenospheres/polyurethane Syntactic Foams Fabricated Through Infiltration Process

Experimental study on the crashworthiness of bio-inspired aluminum foam-filled tubes under axial compression loading

Modelling the dynamic compressive response of syntactic foam with hierarchical cell structure

Axial Impact Performances of Composite Aluminum Foam Tubes

Elastic-plastic response for the foam-filled sandwich circular tube under internal blast loading

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method

Crashworthiness study of aluminum foam-filled tubular lattice structures based on triply periodic minimal surface metamaterials under lateral crushing