Abstract:Features peculiar to the synthesis of SiC–Si 3 N 4 –Si 2 N 2 O composite powder with a controlled content of silicon carbide, nitride, and oxynitride phases, as well as the structure and properties of hot-pressed ceramics produced from this powder, were examined. The optimal composition of the synthesized SiC–Si 3 N 4 –Si 2 N 2 O powder was achieved by heating a 1 : 3 mixture of thermally expanded graphite (TEG) and silicon up to 1200°C in air. The interaction of TEG with fine silicon at 1200°C led to the formation of a solid solution of carbon in silicon carbide, accompanied by heat release. The generated heat increased temperature within localized volumes of the TEG cellular structure to a level where air nitrogen facilitated the development of silicon nitride and oxynitride and an amorphous phase. The amorphous phase crystallized as the interaction time increased to 2.5 h. The duration of the process influenced the final distribution of the phases, formed with the participation of CO, SiO, and air nitrogen. The microstructure of the synthesized powder was characterized by a general agglomerated state, resulting from rod and plate forms of Si 3 N 4 and Si 2 N 2 O. Hot pressing of the synthesized SiC–Si 3 N 4 –Si 2 N 2 O composite powder with Al 2 O 3 and Y 2 O 3 activators yielded superfine ceramics, possessing enhanced hardness and fracture toughness (HV10 = 20.7 GPa and K Ic = 6.5 MPa · m 1/2 ). The structure of the ceramics sintered at 2000°C differed from those sintered at 1850°C, primarily by higher density and average grain size. The superfine state significantly influenced the abrasive wear resistance of the ceramics in dry friction conditions. The linear wear index of a sample with an average size of structural elements varying from 0.2 to 1.5 μm was 111 μm/km at a sliding speed of 1 m/sec under a load of 0.2 MPa. This was significantly lower than the linear wear index of industrial ceramics of reaction-sintered silicon carbide (RSSC), which was 232.4 μm/km.

Hard and Tough Novel High-Pressure Γ-Si 3N 4/hf 3N 4 Ceramic Nanocomposites

High-pressure Synthesis of High-Performance Submicron-Sized Polycrystalline Β-Si3n4 Bulk Without Additives

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Synthesis of Novel Superhard Materials under Ultrahigh Pressure

Superhard Composites of Cubic Silicon Nitride and Diamond

Fabrication and Mechanical Properties of Si3N4/SiC Nanocompoisites under Pressureless Sintering.

High‐Pressure Synthesis of Amorphous Si3N4 and SiBN‐based Monoliths Without Sintering Additives

Exceptional hardness and thermal properties of SiC/(Hf,Ta)C(N)/ (B)C ceramic composites derived from single‐source precursor

Synthesis and Characterization of Novel Ti3SiC2–cBN Composites

Synthesis and Consolidation of Composite Materials in the SiC–Si3N4–Si2N2O System

Synthesis and Characterization of NanoComposite Superhard Materials

Nanocrystalline Cubic Silicon Carbide: A Route to Superhardness

Hardness and Thermal Stability of Cubic Silicon Nitride

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Highly Dense Amorphous Si2bc3n Monoliths with Excellent Mechanical Properties Prepared by High Pressure Sintering

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

Densification, Strengthening and Toughening in Hafnium Carbide with the Addition of Silicon Carbonitride

Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire

Insights into the Bond Behavior and Mechanical Properties of Hafnium Carbide under High Pressure and High Temperature

High-pressure Synthesis, Mechanical Properties and Oxidation Behavior of Advanced Boron-Containing Α/β-Si 3N 4/si Ceramics Using Polymer-Derived Amorphous SiBN Ceramics

First-principles calculation of Si–C–N structures with metallicity and high hardness