Abstract:Amorphous SiBCN ceramics are a unique class of structure materials with potential applicationsas high-temperature heat-resistant structural components owing to their combination of special structure and properties of low specific weight, high specific strength and excellent damage tolerance at elevated temperatures. However, it is still in need for further mechanical properties improvements for actual demands by rational co-design of architecture and chemistry as well as understanding the basic features of morphological/microstructural evolution and failure behavior. Thus in this attempt, to target the dense amorphous Si2ByC2N (y=1.5～4) monoliths with high mechanical properties, an attractive way of combinatorial mechanical alloying and high-pressure sintering technique (1000 oC/3～5 GPa/30 min) was proposed using elemental powders of graphite, hexagonal BN, cubic Si and boron as raw materials. The sintering pressure induced microstructural evolution, phase transformation and thermal stability have been investigated by XRD, SEM, TEM and TG measurements, and mechanical performance, especially the fracture behavior was also discussed in details. Results clearly presented that an increase in sintering pressure promoted the phase transformation of completely amorphous matrix to a hybrid structure of substantial amorphous phases and few nanocrystals of metal c-Si and/or t-BN(C) for some monoliths, implying boron-content depending phase composition. High-pressure sintering effectively promoted the densification leading to free volume annihilation and the river-like fracture morphology occurrence. A monotonous increase of the bulk density, nano hardness and Young's modulus as a function of the sintering pressure was observed. Under the same sintering conditions, the increase in boron content weakened the mechanical properties and thermal stability of the amorphous Si2ByC2N (y=1.5～4) monoliths. Dense amorphous Si2B1.5C2N monoliths consolidated at 1000 oC/5 GPa/30 min showed the best performance with the bulk density, nano hardness and Young's modulus obtaining at 2.69 g/cm3, 33.6±2.2 GPa and 414.2±16.5 GPa, respectively.

Highly Dense Amorphous Si2bc3n Monoliths with Excellent Mechanical Properties Prepared by High Pressure Sintering

Microstructural evolution and mechanical performance of high-pressure sintered dense amorphous SiBCN monoliths

High‐Pressure Synthesis of Amorphous Si3N4 and SiBN‐based Monoliths Without Sintering Additives

Effects of High Pressure on the Low-Temperature Sintering of Dense Amorphous SiBCN Monoliths

Densification, Microstructural Evolution and Mechanical Properties of Si-B-C-N Monoliths with LaB6 Addition

Crystallization Behavior of Amorphous Si2bc3n Ceramic Monolith Subjected to High Pressure

High-pressure Synthesis of High-Performance Submicron-Sized Polycrystalline Β-Si3n4 Bulk Without Additives

Fabrication of Dense SiBCN Monolith at a Lower Temperature Andits High-Temperature Performance

Dense, Pure SiC Monoliths with Excellent Oxidation Resistance Sintered at Low Temperatures and High Pressures

Processing and Characterization of SiB0.5C1.5N0.5 Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Research on the Densification Process of the Mechanically-Alloyed Amorphous 2Si-B-3c-n Powder

Carbon‐content‐dependent Phase Composition, Microstructural Evolution, and Mechanical Properties of SiBCN Monoliths

High-pressure Synthesis, Mechanical Properties and Oxidation Behavior of Advanced Boron-Containing Α/β-Si 3N 4/si Ceramics Using Polymer-Derived Amorphous SiBN Ceramics

Crystallization and Microstructural Evolution Process from the Mechanically Alloyed Amorphous SiBCN Powder to the Hot-Pressed Nano SiC/BN(C) Ceramic

In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: Processing, microstructure, mechanical properties and oxidation behavior

Microstructural Evolution, Mechanical and Thermal Properties of LaB6 Embedded in Si-B-C-N Prepared by Spark Plasma Sintering

Density modified structure and mechanical properties of amorphous Si2BC3N by ab‐initio molecular dynamics calculations

Boron-dependent self-healing behavior and mechanical properties of polymer-derived amorphous SiBCN monoliths

Low temperature fabrication of highly dense α‐Si3N4 ceramics

Dense Amorphous Si2BC1-4N Monoliths Resistant to High-Temperature Oxidation for Hypersonic Vehicle

Microstructures and Mechanical Properties of SiBCNAl Ceramics Produced by Mechanical Alloying and Subsequent Hot Pressing