Abstract:Ceramic core is an essential component in the precise casting of hollow turbine blades, and the investigation on 3D printing of silica-based ceramic cores is crucial to the development of aviation industry; however, they are suffered from difficulty in high-temperature strength and structural anisotropy. In present work, silica-based ceramic cores were prepared via DLP stereolithography 3D printing, and the anisotropy management on microstructures and properties were explored based on the particle size of fused silica powders. In 3D printed ceramic cores with coarse powders, significant anisotropy was displayed exhibiting multilayer structure with large gaps in horizontal printing and uniform porous microstructure in the vertical direction, which was further explained by the particle deposition in printing. With finer silica powders, the uniformity in the microstructures was highly improved, attributed to the enhanced particle dispersion in ceramic slurries and promoted interlayer particle rearrangement during sintering. To evaluate the anisotropy in mechanical property, the ratio of vertical strength to horizontal strength (σV/σH) was proposed, which rose from 0.48 to 0.86 as the particle size decreased from 35 μm to 5 μm, suggesting enhanced mechanical uniformity. While the average particle size of silica powders was 5 μm, the flexure strengths of ceramic cores in different directions were up to 18.5 MPa and 16.3 MPa at 1540°C with σV/σH ratio of 0.88, which well satisfied the demands for the casting of turbine blades. This work inspires new guidance on the anisotropy management in ceramic cores prepared by 3D printing, and provides new technology for fabrication of silica-based ceramic cores with superior high temperature mechanical properties.

Fabrication of Silica-Based Ceramic Cores with Internal Lattice Structures by Stereolithography

Improved mechanical properties of SiB6 reinforced silica-based ceramic cores fabricated by 3D stereolithography printing

Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control

Improved Mechanical Properties of SiC Fiber Reinforced Silica-Based Ceramic Cores Fabricated by Stereolithography

Fabrication and Casting Simulation of Composite Ceramic Cores with Silica Nanopowders

Microstructure and Properties of Silica-Based Ceramic Cores by Laser Powder B E D Fusion Combine D with Vacuum Infiltration

Influence of debinding parameter and nano-ZrO2 particles on the silica-based ceramic cores fabricated by stereolithography-based additive manufacturing

Enhanced Comprehensive Properties of Stereolithography 3D Printed Alumina Ceramic Cores with High Porosities by a Powder Gradation Design

Fused silica ceramic core based on network-structured zircon design via 3D printing

Alumina-Based Ceramic Core Nano-Composites For Investment Casting

Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration

Creep Mechanism of Zircon-Added Silica Ceramic Cores Formed by Stereolithography

Anisotropy management on microstructure and mechanical property in 3D printing of silica-based ceramic cores

Effect of Al(OH) 3 on the Properties of Silica-based Ceramic Cores Prepared by Laser Powder Bed Fusion Combined with Vacuum Infiltration

Effect Of Silica Sol On The Properties Of Alumina-Based Duplex Ceramic Cores

Fabrication of Ceramic Cores Via Layered Extrusion Forming Using Graphite As Pore-Forming Agent

3D Printing of Silica-Based Ceramic Cores Reinforced by Alumina with Controlled Anisotropy

Additive Manufacturing of Complex Ceramic Cores and Verification of Casting Process

Effect of the Addition of Silica Sol on Layered Extrusion Forming of Al2O3-based Cores

Silica strengthened alumina ceramic cores prepared by 3D printing

Alumina-based ceramic cores prepared by vat photopolymerization and buried combustion method