Abstract:The temperature enduring capacity of turbine blades determines the thrust-weight ratio of aero-engines. The heat dissipation efficiency of blades is improved mainly through designing complex internal cooling channel. As a transitional component of blade preparation, the shape of ceramic cores has become gradually complex. The traditional process is difficult to meet the preparation requirements of ceramic core with complex structure due to the limitation of mold. Stereolithography 3D printing provides a feasible technology for the preparation of ceramic cores with complex structures. The key to high-performance ceramic core via the stereolithography 3D printing lies in the prepare ceramic slurry with high solid loading, low viscosity and uniform stability. Choosing suitable dispersant is an effective way to prepare above standard slurry. In this study, the effects of single and dual dispersants on the rheological properties of ceramic slurry were systematically investigated. The action mechanism of the dispersant was analyzed. The functional relationship between solid loading and viscosity was elucidated. The silicon-based ceramic core slurry with 70 vol% solid loading and viscosity of 10520 mPa s (12.6 s−1) was obtained. Through optimizing printing parameters, the complex structure silicon-based ceramic core was fabricated. The influence of solid loading on the microstructure and physical properties of the ceramic core was investigated. The results show that with the increase of solid loading, the shrinkage of ceramic core lowers and the flexural strength of ceramic core strengthens. The successfully preparation of complex structure ceramic core based on high solid loading slurry promotes the extensively implemented of stereolithography 3D printing technology in the field of ceramic core.

Additive Manufacturing of Complex Ceramic Cores and Verification of Casting Process

Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry

High solid loading, low viscosity stereolithography 3D printing ceramic cores slurry

Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting

Fabrication of Silica-Based Ceramic Cores with Internal Lattice Structures by Stereolithography

Innovative ceramic paste for stereolithography additive manufacturing alumina core applied in turbine blade casting

Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control

Additive Manufacturing and Characterization of Complex Al2o3 Parts Based on A Novel Stereolithography Method

Influence of debinding parameter and nano-ZrO2 particles on the silica-based ceramic cores fabricated by stereolithography-based additive manufacturing

Characterization of Slurry-Cast Layer Compounds for 3D Printing of High Strength Casting Cores

Fabrication of complicated ceramic parts by gelcasting based on additive manufactured acetone-soluble plastic mold

Digital light processing 3D printing of ceramic shell for precision casting

High-resolution multiceramic additive manufacturing based on digital light processing

Enhanced high-temperature dimensional accuracy by fibers in silica ceramic cores prepared through vat photopolymerization 3D printing

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Digital light processing‐based additive manufacturing of orientation‐controlled Al2O3 ceramics with improved damage tolerance

Alumina-based ceramic cores prepared by vat photopolymerization and buried combustion method

Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration

Alumina-based ceramic mold with integral core and shell for hollow turbine blades fabricated by Laser powder bed fusion

Preparation of large-size alumina ceramic parts by DLP 3D printing using high-solid-loading paste and optimizing the debinding process

Direct ink writing additive manufacturing of porous alumina-based ceramic cores modified with nanosized MgO