Abstract:The ceramic core plays an important role in the preparation of aero-engine hollow blades, as it can directly determine the precision and pass rate of the cooling passage in the blade cavity. Sufficient high-temperature bending strength, high open porosity, and low sintering shrinkage are the main requirements for qualified ceramic cores. In order to prepare qualified ceramic cores with complex structures, in-situ mullite-reinforced Al2O3-based ceramic cores were successfully prepared using vat photopolymerization 3D printing technology. The in-situ synthesis of mullite was designed through thermodynamic analysis. The influence mechanisms of the sintering temperature and doping amount of fused silica on the open porosity, sintering shrinkage, and bending strength of the core were systematically investigated. With an increase in the sintering temperature and doping amount of fused silica, the porosity of the in situ mullite-reinforced ceramic core decreased. Sintering shrinkage increased with an increase in the sintering temperature and doping amount of fused silica. The cores containing 20 wt% fused silica showed the smallest sintering shrinkage. The bending strength increased with an increase in the sintering temperature and the doping amount of fused silica. A core doped with 20 wt% fused silica had the highest bending strength at 1773.15 K. Furthermore, 20 wt% fused silica doping, sintered at 1673.15 K, can be used to prepare in-situ mullite enhanced Al2O3-based cores with the best comprehensive properties. This core has a higher open porosity (40%), suitable bending strength of 25 MPa (at 1773.15 K), and lower sintering shrinkage in the Z direction. The significance of this study lies in the regulation of in-situ mullite generation and viscous flow in solid-liquid sintering by adjusting the doping amount of fused silica and the sintering process, and this opens up new pathways by the coordinated regulation of strength, open porosity, and sintering shrinkage of 3D printed ceramic cores.

Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting

Innovative ceramic paste for stereolithography additive manufacturing alumina core applied in turbine blade casting

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Enhanced Comprehensive Properties of Stereolithography 3D Printed Alumina Ceramic Cores with High Porosities by a Powder Gradation Design

Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry

Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control

Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting

3D Printing of Silica-Based Ceramic Cores Reinforced by Alumina with Controlled Anisotropy

High-performance 3D-printed Al2O3 cores for low-temperature sintering

Preparation of Silica Based Ceramic Core in Casting of Nickel-Based Alloy Hollow Blade

Fabrication of Single-Crystal Superalloy Hollow Blade Based on Integral Ceramic Mold

Alumina-based ceramic mold with integral core and shell for hollow turbine blades fabricated by Laser powder bed fusion

Influence of debinding parameter and nano-ZrO2 particles on the silica-based ceramic cores fabricated by stereolithography-based additive manufacturing

Performance of silicon oxide-based ceramic cores made by rapid prototyping for single crystal turbine blades

Leaching improvement of ceramic cores for hollow turbine blades based on additive manufacturing

In-situ Y3Al5O12 enhances comprehensive properties of alumina-based ceramic cores by vat photopolymerization 3D printing

Enhanced 3D printed Al2O3 core via in-situ mullite

Alumina-Based Ceramic Core Nano-Composites For Investment Casting

Gelcasting of Alumina Based Ceramic Cores Containing Yttria for Single Crystal and Directional Solidification Blades

Silica strengthened alumina ceramic cores prepared by 3D printing

Additive Manufacturing of Complex Ceramic Cores and Verification of Casting Process