Abstract:Carbon nanotube (CNT) fiber is a promising material due to its extensive potential in micro/nanoelectronics, where the thermal performance is of great importance. In this work, a well-developed steady-state electro-Raman-thermal technique is employed and extended to the ambient environment for measuring thermal conductivity of the CNTs fiber. In this technique, two ends of the CNT fiber are attached to heat sinks and a steady electrical current flows in a sample to induce Joule heating. The heat dissipates to the ambient air and goes through the sample to the heat sinks. With combined effects of natural heat convection and heat conduction, a steady temperature profile along the sample can be established. The middle point temperature of the fiber is probed by measuring the local Raman spectrum. It is because the Raman scattering (such as G peak) of CNT fiber is temperature dependent and thus it can be used as a temperature indicator for thermal property measurement. In calibration experiment, the temperature coefficient of the G peak of CNT fiber is first obtained. A modified one-dimensional heat conduction solution involving free convection effect is derived as #br#T(x) =((I2R)/(hLS))(1 -(e√(hS)/(kAc)x)+e-√(hS)/((kAc)x)/(e√(hS)/(kAc)L/2)+e-√(hS)/(kAc)L/2))+ T0. It can be found that the relationship between middle point temperature (T0) and applied Joule heating power (I2R) can be used to extract the thermal conductivity of the material (k) as long as the convection coefficient (h) is available. In this work, the convection coefficient is calculated by the model established by Peirs et al. The thermal conductivity of CNT fiber synthesized from floating catalyst method is measured to be 66.93 W/(m·K)± 11.49 W/(m·K). This value is a little bit larger than that of other CNT fibers synthesized by the acid spun method or the dry-spinning method, which can be explained by the different sample structures induced from different synthesize method. This value is two orders of magnitude smaller than that of individual carbon nanotube, and two orders of magnitude larger than that of CNTs packed bed, showing that heat conduction in CNT based bulk material is determined mainly by a large number of thermal interfaces between CNTs contacts rather than the intrinsic thermal property of CNT.

Nanometer-level Temperature Mapping of Joule-heated Carbon Nanotubes by Plasmon Spectroscopy

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.

Thermal Probing of Energy Dissipation in Current-Carrying Carbon Nanotubes

Spatially-Resolved Temperature Measurements of Electrically-Heated Carbon Nanotubes

Ultrahigh Convergent Thermal Conductivity of Carbon Nanotubes from Comprehensive Atomistic Modeling

Parallel Measurement of Conductive and Convective Thermal Transport of Micro/nanowires Based on Raman Mapping

Nanoscale Heat Transport of Vertically Aligned Carbon Nanotube Bundles for Thermal Management Applications

Thermal Stability of Carbon Nanotubes Probed by Anchored Tungsten Nanoparticles

Raman measurement of heat transfer in suspended individual carbon nanotube

Ultra High Thermal Resolution Scanning Probe Microscopy via Carbon Nanotube Tipped Thermal Probes

Thermal Characterization of Carbon Nanotube Fibers Based on Steady-State Electro-Raman-Thermal Technique

Differential Multi-probe Thermal Transport Measurements of Multi-walled Carbon Nanotubes grown by Chemical Vapor Deposition

Joule heat treatment on carbon nanotube films at different elevated temperatures

Local temperature measurements on nanoscale materials using a movable nanothermocouple assembled in a transmission electron microscope.

A Modified High-Resolution TEM for Thermoelectric Properties Measurements of Nanowires and Nanotubes

Measurements of Thermal Conductivity of Individual Carbon Nanotubes

Heat Dissipation Mechanism at Carbon Nanotube Junctions on Silicon Oxide Substrate

Infrared Microscopy Thermal Characterization of Opposing Carbon Nanotube Arrays

Nanosecond nanothermometry in an electron microscope

Plasmonic Heating Induced by Au Nanoparticles for Quasi-Ballistic Thermal Transport in Multi-Walled Carbon Nanotubes

Field-Dependent Heat Dissipation of Carbon Nanotube Electric Currents