Abstract:The efficient separation and purification of high-purity hydrogen is imperative and desirable. We systematically explored the H 2 purification performance of the T-C 3 N 2 membrane with and without biaxial compressive (BC) strain and charge engineering by using MD simulations and DFT calculations. We found that the pure T-C 3 N 2 membrane has relatively poor H 2 selectivity as CO 2 can also permeate through the membrane, and two modulation methods of BC-strain and charge were thus introduced separately to enhance the H 2 separation performance for the first time. The T-C 3 N 2 membrane with BC-strains modulation (1 %–3%) has excellent H 2 permeance of 1.60 × 10 7 –1.85 × 10 7 GPU at 300 K with 15.6 % enhancement with respect to the pure T-C 3 N 2 membrane. The selectivity of H 2 over gases (CO, N 2 , CO 2 , H 2 O, CH 4 ) was drastically improved, for example, H 2 /CH 4 is enhanced from 5.8 × 10 20 to 2.1 × 10 36 under 3 % strain engineering. The introduction of charge (1e–3e, 1e − –2e − ) also enhances the H 2 permeance of 1.47 × 10 7 –1.68 × 10 7 GPU and the selectivity at 300 K. In particular, the charge (1e) and (1e − ) modulations exhibit a desired permeance-selectivity trade-off for H 2 purification with the enhancement of 5 % permeability and at least 1.3 times selectivity of H 2 to other gases, respectively. Finally, the synergistic effect of BC-strain and charge on the H 2 separation was studied, and it is much superior to separated BC-strain and charge engineering for H 2 purification, where the H 2 permeance enhances up to 1.86 × 10 7 –1.89 × 10 7 GPU, and the H 2 selectivity at 300 K is also enlarged at least ten times compared with that of the most effective modification of the isolated 2 % BC-strain and 1e charge, indicating synergistic effect further enhances the H 2 separation performance. Therefore, the excellent modulations of appropriate BC-strain and charge engineering, particularly for their synergistic effect make the T-C 3 N 2 membrane a promising candidate for highly permeant and selective H 2 separation and purification that would be easily realized experimentally.

Polyimide-derived Carbon Molecular Sieve Membranes for High-Efficient Hydrogen Purification: the Development of a Novel Phthalide-Containing Polyimide Precursor

Ultraselective carbon molecular sieve membrane for hydrogen purification

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Excellent gas separation performance of hybrid carbon molecular sieve membrane derived from polyimide/10X zeolite for hydrogen purification

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Precise molecular sieving using metal‐doped ultramicroporous carbon membranes for H2 separation

Carbon hollow fiber membranes for a molecular sieve with precise-cutoff ultramicropores for superior hydrogen separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Tailoring sub-3.3 Å ultramicropores in advanced carbon molecular sieve membranes for blue hydrogen production

Pebax-derived Ultra-Microporous Carbon Molecular Sieve Composite Membrane Assisted by Organic Interlayer for Gas Separation

Bimetallic PdPt Nanoparticles Decorated PES Membranes for Enhanced H2 Separation

High-performance carbon molecular sieve membrane for C2H4/C2H6 separation: Molecular insight into the structure-property relationships

Hydrogen-bonded hybrid membranes based on hydroxylated metal-organic frameworks and PIM-1 for ultrafast hydrogen separation

Highly Permeable Mixed Matrix Hollow Fiber Membrane as a Latent Route for Hydrogen Purification from Hydrocarbons/Carbon Dioxide

Breaking the Permeability-Selectivity Trade-Off: Advanced carbon molecular sieve membranes derived from thermally rearranged Mixed-Matrix membrane precursors

High-Performance Carbon Molecular Sieve Membranes Derived from a PPA-Cross-linked Polyimide Precursor for Gas Separation

Highly-efficient hydrogen purification with the T-C 3 N 2 membrane via strain and charge engineering as well as their synergistic effect

Engineering Robust Porous/Dense Composite Hollow Fiber Membranes for Highly Efficient Hydrogen Separation

Insights into micro-structure and separation mechanism of benzimidazole-linked polymer membrane for H 2 /CO 2 separation

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors