Abstract:The fabrication of compact, continuous, and large-scale metal organic framework (MOF) membranes with high permeability and H-2/CO2 selectivity remains challenging because of the wake interaction between the MOF membrane and the substrate. In addition, substrates with smooth and plain surfaces and suitable pore size are required to prepare high-quality MOF membranes because it is difficult to obtain dense and continuous MOF membranes on a substrate with large pores and rough surfaces. To overcome these challenges, numerous MOF membrane growth methods have emerged, including in situ (direct) growth, secondary (seeded) growth, and layer-by-layer growth methods as well as electrostatic spinning and the chemical modification of the substrate. Among these methods, usage of substrates suitable for surface-functionalization is a promising technique. Herein, Al2O3 was selected as the substrate and was coated with PIM-1 (one polymer of intrinsic microporosity), followed by carboxylation of PIM-1 to furnish a large number of carboxyl groups on the surface. In situ growth of the MOF membrane using the interactions between the carboxyl group and the metal yielded two types of compact, continuous, and large-scale polymer-supported MOF membranes (PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1). Furthermore, the fabricated polymer-supported MOF membrane structures were investigated by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Gas separation experiments were performed to explore the gas permeability and selectivity of the prepared MOF membranes. The XRD characterization confirmed the pure phase and high crystallinity of the MOF membranes. The SEM images showed that the MOF membranes were compact and continuous with a tight combination between the MOF crystal membrane and the substrate. Gas separation measurements showed that both MOF membranes exhibited high H-2 permeability and selectivity for H-2/CO2. For the PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1 membranes, the 1 : 1 binary mixtures gas separation factors of H-2/CO2 calculated as the gas molar ratios in the permeate and retentate side 7.32 and 9.69, respectively, at room temperature and atmospheric pressure. The H-2/CO2 mixture separation factors of the two MOF membranes exceeded the corresponding Knudsen constants (4.7), with H-2 permeances higher than 3.16 x 10(-6) and 1.14 x 10(-6) mol.m(-2).s(-1).Pa-1, respectively. The ideal separation factors of H-2/CO2 of both MOF membranes calculated as the ratio of single gas permeances were 7.70 and 12.04, respectively, with the respective H-2 permeances of up to 3.73 x 10(-6) and 3.86 x 10(-6) mol.m(-2).s(-1).Pa-1. Because of their outstanding characteristics, these novel MOF membranes can be widely used in the fields of H-2 purification and separation.

Highly Permeable Mixed Matrix Hollow Fiber Membrane as a Latent Route for Hydrogen Purification from Hydrocarbons/Carbon Dioxide

Mixed Matrix Membranes for C2H4/C2H6 Separation Using a Phosphate Anion-Pillared Microporous Material

Enhanced Ethylene Transport of Mixed-Matrix Membranes by Incorporating Anion-Pillared Hybrid Ultramicroporous Materials Via in Situ Growth

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Study on the Performance of Cellulose Triacetate Hollow Fiber Mixed Matrix Membrane Incorporated with Amine-Functionalized NH2-MIL-125(Ti) for CO2 and CH4 Separation

Fabrication of a flexible hydrogen-bonded organic framework based mixed matrix membrane for hydrogen separation

Hydrogen Selective Nh2-Mil-53(Al) Mof Membranes With High Permeability

Mixed Matrix Membranes Containing UiO-66(Hf)-(OH)2 Metal–Organic Framework Nanoparticles for Efficient H2/CO2 Separation

Fabrication of Functionalized MOFs Incorporated Mixed Matrix Hollow Fiber Membrane for Gas Separation

Molecular-scale hybrid membranes containing benzimidazole linkages on large-area α-alumina tubes for H 2 purification

The Enhanced Hydrogen Separation Performance of Mixed Matrix Membranes by Incorporation of Two-Dimensional ZIF-L into Polyimide Containing Hydroxyl Group

Carbon hollow fiber membranes for a molecular sieve with precise-cutoff ultramicropores for superior hydrogen separation

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Fabrication of Polymer-Supported Metal Organic Framework Membrane and Its Gas Separation Performance

Boosting Hydrogen Transport in Mixed Matrix Membranes Through Continuous Spillover Via Pd‐Functionalized MOF Gel Networks

Fabrication, Facilitating Gas Permeability, and Molecular Simulations of Porous Hypercrosslinked Polymers Embedding 6FDA-Based Polyimide Mixed-Matrix Membranes

Preparation and Characterization of Mixed Matrix Membranes Based on PVDF and Three Inorganic Fillers (fumed Nonporous Silica, Zeolite 4A and Mesoporous MCM-41) for Gas Separation

Porous ceramic hollow fiber-supported Pebax/PEGDME composite membrane for CO2 separation from biohythane

Ultraselective Carbon Hollow Fiber Membrane for H2 Extraction from Blended Natural Gas

Hydrogen-bonded hybrid membranes based on hydroxylated metal-organic frameworks and PIM-1 for ultrafast hydrogen separation

Polyimide-derived Carbon Molecular Sieve Membranes for High-Efficient Hydrogen Purification: the Development of a Novel Phthalide-Containing Polyimide Precursor