Abstract:The efficient separation and purification of high-purity hydrogen is imperative and desirable. We systematically explored the H 2 purification performance of the T-C 3 N 2 membrane with and without biaxial compressive (BC) strain and charge engineering by using MD simulations and DFT calculations. We found that the pure T-C 3 N 2 membrane has relatively poor H 2 selectivity as CO 2 can also permeate through the membrane, and two modulation methods of BC-strain and charge were thus introduced separately to enhance the H 2 separation performance for the first time. The T-C 3 N 2 membrane with BC-strains modulation (1 %–3%) has excellent H 2 permeance of 1.60 × 10 7 –1.85 × 10 7 GPU at 300 K with 15.6 % enhancement with respect to the pure T-C 3 N 2 membrane. The selectivity of H 2 over gases (CO, N 2 , CO 2 , H 2 O, CH 4 ) was drastically improved, for example, H 2 /CH 4 is enhanced from 5.8 × 10 20 to 2.1 × 10 36 under 3 % strain engineering. The introduction of charge (1e–3e, 1e − –2e − ) also enhances the H 2 permeance of 1.47 × 10 7 –1.68 × 10 7 GPU and the selectivity at 300 K. In particular, the charge (1e) and (1e − ) modulations exhibit a desired permeance-selectivity trade-off for H 2 purification with the enhancement of 5 % permeability and at least 1.3 times selectivity of H 2 to other gases, respectively. Finally, the synergistic effect of BC-strain and charge on the H 2 separation was studied, and it is much superior to separated BC-strain and charge engineering for H 2 purification, where the H 2 permeance enhances up to 1.86 × 10 7 –1.89 × 10 7 GPU, and the H 2 selectivity at 300 K is also enlarged at least ten times compared with that of the most effective modification of the isolated 2 % BC-strain and 1e charge, indicating synergistic effect further enhances the H 2 separation performance. Therefore, the excellent modulations of appropriate BC-strain and charge engineering, particularly for their synergistic effect make the T-C 3 N 2 membrane a promising candidate for highly permeant and selective H 2 separation and purification that would be easily realized experimentally.

Highly-efficient hydrogen purification with the T-C 3 N 2 membrane via strain and charge engineering as well as their synergistic effect

A high selective and permeable C7N6 monolayer membrane for H2 purification: First-principles and molecular dynamics simulations

Theoretical design of an effective He separation membrane based on nanoporous C9N4 monolayer

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Excellent gas separation performance of hybrid carbon molecular sieve membrane derived from polyimide/10X zeolite for hydrogen purification

Ultraselective carbon molecular sieve membrane for hydrogen purification

Thin-Film-Composite Carbon Molecular Sieve Membranes for Efficient Helium and Hydrogen Separation

Vertically-aligned Carbon Nanotube Membranes for Hydrogen Separation

Engineering Robust Porous/Dense Composite Hollow Fiber Membranes for Highly Efficient Hydrogen Separation

Synergistic effect of charge and strain engineering on porous g-C9N7 nanosheets for highly controllable CO2 capture and separation

Ultrathin Water-Cast Polymer Membranes for Hydrogen Purification

Gd-doped ceria enhanced triple-conducting membrane for efficient hydrogen separation

Theoretical investigation on two-dimensional conjugated aromatic polymer membranes for high-efficiency hydrogen separation: The effects of pore size and interaction

New Perovskite Membrane with Improved Sintering and Self-Reconstructed Surface for Efficient Hydrogen Permeation

Theoretical design of a strain-controlled nanoporous CN membrane for helium separation

Computational Studies on Holey TMC6 (TM = Mo and W) Membranes for H2 Purification.

Precise molecular sieving using metal‐doped ultramicroporous carbon membranes for H2 separation

Simulation Studies on Improved Separation of Helium and Helium Isotopes by Strain Modulated r -N-GY Monolayer Nanostructure

Oriented Titanium‐MOF Membrane for Hydrogen Purification

Hydrogen-bonded hybrid membranes based on hydroxylated metal-organic frameworks and PIM-1 for ultrafast hydrogen separation

Heptazine-based graphitic carbon nitride as an effective hydrogen purification membrane