Abstract:This study presents a novel approach to forming low-resistance ohmic contacts for AlGaN/GaN HEMTs. The optimized contacts exhibit an outstanding contact resistance of approximately 0.15 Ω·mm. This is achieved by firstly recessing the barrier of the heterostructure to a depth beyond the channel. In this way, the channel region is exposed on the sidewall of the recess. The coverage of the Ti/Al/Ti ohmic metalization on the sidewall is ensured through tilting of the sample during evaporation. The annealing process is performed at a low temperature of 550 °C. The approach does not require precise control of the recess etching. Furthermore, the method is directly applicable to most barrier designs in terms of thickness and Al-concentration. The impact of recessed sidewall angle, thickness and ratio of Ti and Al layers, and the annealing procedure are investigated. Structural and chemical analyses of the interface between the ohmic contacts and epi-structure indicate the formation of ohmic contacts by the extraction of nitrogen from the epi-structure. The approach is demonstrated on HEMT-structures with two different barrier designs in terms of Al-concentration and barrier thickness. The study demonstrate large process window in regard to recess depth and duration of the annealing as well as high uniformity of the contact resistance across the samples, rendering the approach highly suitable for industrial production processes.

Ohmic Contact with a Contact Resistivity of 12 Ω ⋅ Mm on P-Gan/algan/gan

Electrical Characteristics of Ti/Al/Ti/Au Multilayer Ohmic Contacts to N-Type GaN

Carrier transport mechanism of Mg/Pt/Au Ohmic contact on p-GaN/AlGaN/GaN platform with ultra-low resistivity

Ti/Al/Pt/Au and Al Ohmic Contacts on Si-Substrated Gan

Optimization of Ohmic Contact to Ultrathin-Barrier AlGaN/GaN Heterostructure via an 'Ohmic-Before-Passivation' Process

Ni/Ag/Pt Ohmic Contacts to P-type GaN

Research on P-Type GaN / Au Ohmic Contact

Novel Structural Ti/Al-Based Ohmic Contacts on Algan/Gan Heterostructures

Very-low-specific-resistance Pd/Ag/Au/Ti/Au alloyed ohmic contact to p GaN for high-current devices

Design and Fabrication of Ohmic Contact on AlGaN/GaN Heterostructure

Metal/n-AlGaN Ohmic Contact

Low Ohmic Contact Resistivity Realized by in Situ SiNx Insertion for High Al-composition-AlGaN/GaN Heterostructure

Low-Resistive Ohmic Contacts in High-Electron-Mobility AIN/GaN Heterostructures by Suppressing the Oxygen Incorporation

A Novel Ni/Ag/Pt Ohmic Contact to P-Type GaN for Flip-Chip Light-Emitting Diodes

Pd/In/Ni/Au Contact to N-Polar N-Type Gan Fabricated by Laser Lift-Off

Highly Reflective Ni/Ag/Pt/Au Ohmic Contacts To P-Gan With Ito Interlayer

Ohmic Contact Performance Between Ti/Al/Ti/Au and AlGaN

Mechanism of low Ohmic contact resistance to p-type GaN by suppressed edge dislocations

Low Contact Resistance CMOS-Compatible RF GaN-on-Silicon HEMTs

Ultra-Low Resistance Ohmic Contacts to Gan with High Si Doping Concentrations Grown by Molecular Beam Epitaxy

Structural investigation of ultra-low resistance deeply recessed sidewall ohmic contacts for AlGaN/GaN HEMTs based on Ti/Al/Ti-metallization