Abstract:In this paper, Ni/Au/Ge/Ni/Au laminated metals were deposited on the n-(Al0.27Ga0.73)(0.5)In0.5P by electron beam evaporation, the ohmic contact with low contact resistance was successfully prepared by optimized annealing process. The specific contact resistance reached 1.4 x 10(-4) Omega.cm(2) when annealed at 445 degrees C for 600 s. The result of the secondary ion mass spectrometer shows that the solid-state reaction takes place at the interface between the laminated metal Ni/Au/Ge/Ni/Au and n-AlGaInP, then the germanium atoms and indium atoms diffuse outwards due to thermal decomposition and leave vacancies in the lattice. In this paper, the reason for the formation of ohmic contact is attributed to the fact that the germanium vacancy and indium vacancy are occupied by gallium atoms as donors to increasing the N-type doping concentration. The optimized annealing process can improve the ohmic contact performance of n-(Al0.27Ga0.73)(0.5)In0.5P with low doping concentration, but the specific contact resistivity has no obvious relationship with the annealing process when the of doping concentration of n-(Al0.27Ga0.73)(0.5)In0.5P increased. The Schottky barrier is high at low doping concentration of n-(Al0.27Ga0.73)(0.5)In0.5P. So inter diffusion in the annealing process could significantly increase the doping concentration of n-(Al0.27Ga0.73)(0.5)In0.5P and reduce the Schottky barrier height. Nevertheless, the Schottky barrier of the sample with high doping concentration is low enough what is not sensitive with inter diffusion. It provides a new method for the preparation of N-electrode of AlGaInP thin film light-emitting-diodes chip, as so as avoid the problem of n(+)-GaAs absorption in the conventional N-electrode preparation method and the problem of electrode dropping. However, there are still some shortcomings in this paper. The disadvantage is that the high doping concentration of n-AlGaInP will affect the crystal quality, which will reduce the luminous efficiency of LED. Therefore, in order to prepare ohmic contact with excellent properties on n-AlGaInP with lower doping concentration, optimizing the electrode design and the surface treatment of semiconductor materials are the keys to follow-up research.

Pd/In/Ni/Au Contact to N-Polar N-Type Gan Fabricated by Laser Lift-Off

Electrical Characteristics of Ti/Al/Ti/Au Multilayer Ohmic Contacts to N-Type GaN

Formation of Low‐resistance and Thermally Stable Ohmic Contacts to Laser Lift‐off Prepared N‐polar N‐gan

Ni/Pd-based Ohmic Contacts to P-Gan Through P-Ingan/p+-gan Contacting Layers

Very-low-specific-resistance Pd/Ag/Au/Ti/Au alloyed ohmic contact to p GaN for high-current devices

Au/Ni/Au as a contact for p-Type GaAs

Ohmic Contact Mechanism of Ni/Au Contact to P-Type Gan Studied by Rutherford Backscattering Spectrometry

A Novel Ni/Ag/Pt Ohmic Contact to P-Type GaN for Flip-Chip Light-Emitting Diodes

Oxidation Treatment on Ni/Au Ohmic Contacts to P‐type GaN

Study on the effect of thermal annealing process on ohmic contact performance of AuGeNi/n-AlGaInP

Performance Comparison of Pt/Au and Ni/Au Schottky Contacts on Alxga1-X N/Gan Heterostructures at High Temperatures

Formation of Low-Resistant and Thermally Stable Nonalloyed Ohmic Contact to N-Face N-Gan

Ohmic Contact with a Contact Resistivity of 12 Ω ⋅ Mm on P-Gan/algan/gan

Ni/Ag/Pt Ohmic Contacts to P-type GaN

Transparent (Ni,Au)/ZnO:Al-Based Ohmic Contacts to p-Type GaN as an Insight into the Role of Ni and Au in Standard p-Type GaN Contacts

Highly Reflective Ni/Ag/Pt/Au Ohmic Contacts To P-Gan With Ito Interlayer

Thermal Annealing Effects on Ni/Au Contacts to P Type Gan in Different Ambient

Study of Ti/Au, Ti/Al/Au, and Ti/Al/Ni/Au ohmic contacts to n -GaN

Study of Ti/Au, Ti/Al/Au, a nd Ti/Al/Ni/Au ohmic co ntacts to n-GaN

Effective Contact Resistivity Reduction for Mo/Pd/n-In0.53Ga0.47 As Contact

Ohmic Contact of Ti/Al/Ni/Au on N-Face GaN