Abstract:The optical fiber composite ground wire (OPGW), serving as a ground wire and providing communication capabilities, has been widely utilized in high-voltage transmission lines in China. Considering the fault current diversion during short circuits and lightning events, OPGW is generally grounded at each tower, while in case of which the induced electromotive force on OPGW generated by the alternating current forms an induced current loop and causes energy losses in the grounding loop. The issue becomes more prominent in higher voltage levels and larger load currents. The assessment of losses before insulating OPGW is crucial data to support the economic consideration and power saving expectation for OPGW insulation retrofit of the overhead power line. To provide a valuable reference and reveal the need for insulation retrofits of the OPGW, this study investigates the induced currents along each tower-grounded OPGW and the corresponding induced power losses on the 750kV double-circuit transmission lines. The impact of various line parameters and operational conditions are discussed via the numerical simulation. The results indicate that the total losses can reach 10 6 kWh/a.km when both circuits are transmitting power at a full load of 2300 MVA. The tower span, tower grounding resistance, and the DC resistance of the OPGW are found to have minimal impact on the total power losses, although the current distribution is affected by these factors. Conductor transposition, phase sequences, and transmission load current have a significant influence on both the amplitude of the induced current and the power losses. Reverse phase sequence ABC-CBA and the symmetrical load on both sides of the circuits could obtain the lowest induced power loss.

Analysis of the Method of Reducing the Induced Voltage and Current of Ground Wire

Analysis of Induced Voltage of Ground Wires in 1000kv Transmission Lines

Gis Induced Current Analysis in Multipoint Grounding Systems by Using 3-D Finite Element Method

Simulation and analysis of induced voltage and induced current on overhead ground wire of Jindongnan-Nanyang-Jingmen 1000kV UHV AC transmission line

Grounding System Analysis of 220 Kv Power Cable Lines Installed Underneath a Bridge

Simulation and Analysis of Induced Voltage and Current on Overhead Ground Wire of Huainan～Wannan～Zhebei～Huxi 1000kv UHV AC Double-Circuit Transmission Line

Characteristic of Power-transmission-induced Current and Power Loss on the OPGW of 750 kV Transmission Line System

Performance of Different Grounding Systems of 500 Kv XLPE Long Submarine Cables Based on Improved Multiconductor Analysis Method

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Calculation and Analysis on Induced Voltage and Current of 1 000 Kv Transmission Line Adopting Structure of Double Circuit on the Same Tower

Influence of Overhead Transmission Line on Grounding Impedance Measurement of Substation

Single-phase grounding overvoltage of long-distance UHVAC lines

Research of Neutral Grounding Modes for 20 Kv Distribution Network

Research of neutral grounding modes for 20kV distribution network

Impact of zero-sequence mutual inductance in UHV Anhui-to-east power transfer lines on phase-earth distance protection

Calculation and Analysis of Compound Optical Ground Wire Fault Transient Current and Voltage Distribution

Analysis of Short-Circuit Current Characteristics and Its Distribution of Artificial Grounding Faults on DC Transmission Lines

Grounding System Design of 1 000 Kv Ultra-high Voltage Substation

CALCULATION AND ANALYSIS OF FAULT CURRENT DISTRIBUTION FOR COMPOUND OPTICAL GROUND WIRE SYSTEM

Improving the Lightning Protection Effect of Multi-Circuit Tower by Installing Coupling Ground Wire