Abstract:The detector material Cadmium Zinc Telluride (CZT) achieves excellent spatial resolution and good energy resolution over a broad energy range, several keV up to some MeV. Presently, there are two main methods to grow CZT crystals, the Modified High-Pressure Bridgman (MHB) and the High-Pressure Bridgman (HPB) process. The study presented in this paper is based on MHB CZT substrates from the company Orbotech Medical Solutions Ltd. [Orbotech Medical Solutions Ltd., 10 Plaut St., Park Rabin, P.O. Box 2489, Rehovot, Israel, 76124]. Former studies have shown that high-work-function materials on the cathode side reduce the leakage current and, therefore, improve the energy resolution at lower energies. None of the studies have emphasized on the anode contact material. Therefore, we present in this paper the result of a detailed study in which for the first time the cathode material was kept constant and the anode material was varied. We used four different anode materials: Indium, Titanium, Chromium and Gold, metals with work-functions between 4.1eV and 5.1eV. The detector size was 2.0×2.0×0.5cm3 with 8×8 pixels and a pitch of 2.46mm. The best performance was achieved with the low-work-function materials Indium and Titanium with energy resolutions of 2.0keV (at 59keV) and 1.9keV (at 122keV) for Titanium and 2.1keV (at 59keV) and 2.9keV (at 122keV) for Indium. Taking into account the large pixel pitch of 2.46mm, these resolutions are very competitive in comparison to those achieved with detectors made of material produced with the more expensive conventional HPB method. We present a detailed comparison of our detector response with 3D simulations. The latter comparisons allow us to determine the mobility-lifetime-products (μτ-products) for electrons and holes. Finally, we evaluated the temperature dependency of the detector performance and μτ-products. For many applications temperature dependence is important, therefore, we extended the scope of our study to temperatures as low as −30°C. There are two important results. The breakdown voltage increases with decreasing temperature, and electron mobility-lifetime-product decreases by about 30% over a range from 20°C to −30°C. The latter effect causes the energy resolution to deteriorate, but the concomitantly increasing breakdown voltage makes it possible to increase the applied bias voltage and restore the full performance.

Effect of Surface Treatment on Photo-Electric Properties of CZT Thick Film for Radiation Detector

Enhanced UV detection performance of a CdZnTe-based photodetector through surface polishing treatments

Performance optimization of CZT thick films by CdTe buffer layers for solar-blind ultraviolet photoelectric detectors

Mechanical polishing with chemical passivation of perovskite single crystal for high-performance X-ray detector

PEAI Surface Treatment for Low Ion Migration and High-Performance FAPbBr3 Single-Crystal X-ray Detectors

Investigating the influence of CdZnTe and HgCdTe material quality on detector image performance

Effect of passivation sequence on the performance of planar CdZnTe detectors

Effects of UV-ozone treatment on the performance of deep-ultraviolet photodetectors based on ZnGa2O4 epilayers

Detailed studies of pixelated CZT detectors grown with the modified horizontal Bridgman method

The Influence of Surface Treatment on the Performance of Photoconductive Detectors Based on Silicon Wafer

Optimization Of Crystal Surface Treatment For A Double Layer Depth Of Interaction Detector

Regulation of Te oxide layer on a CdZnTe film for adjusting surface contact of a CdZnTe-based device

Eradicating Impurities in Zero-Dimensional Metal Lead Halide Perovskite Films for Stable, Low Dark Current X-ray Detectors

Signal Processing Of A Strengthened Electric Field Line Anode Cdznte Detector

PEAI Surface Treatment for Low Ion Migration and High-Performance FAPbBr 3 Single-Crystal X-ray Detectors

Photocarrier Transport Reconstruction and Dramatical Performance Enhancement in Ultrawide-Bandgap Ε-Ga2o3 Photodetectors Via Surface Defect Passivation

PERFORMANCE IMPROVEMENT OF CZT DETECTORS BY LINE ELECTRODE GEOMETRY

Direct comparison of the performance of CZT detectors contacted with various metals

Effect of Surface Treatment on Printed Carbon Nanotube Field Emitters

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

Interface optimization of free-standing CdZnTe films for solar-blind ultraviolet detection: Substrate dependence