Abstract:This study investigates the improvement of plasticity in body-centered cubic magnesium (Mg)-lithium (Li)-aluminum (Al) alloys, crucial for lightweight structural applications. The ternary Mg-Li-Al alloys exhibits high strength but low ductility. Precipitates at grain boundaries in these alloys, linked to reduced plasticity, are examined for their crystal structure and composition. Advanced microscopic techniques reveal the transformation of precipitates and the development of specific structures at grain boundaries. Thermodynamics of element diffusion at grain boundaries are explored through first-principles calculations, and a phase-field simulation models precipitate evolution. Molecular dynamics simulations elucidate nanoscale mechanisms governing the transition from brittle to ductile fracture modes during artificial aging. The D03-Mg3Al at grain boundaries is a brittle phase, and through a 170°C aging treatment, it induces the precipitation of lamellar α-Mg phase with D03-Mg3Al as nucleation sites. The occupancy energy of Al atoms at Li sites in α-Mg is found to be lower than that in D03-Mg3Al, leading to the dissolution of D03-Mg3Al. The α-Mg, characterized by a stronger metallic nature, exhibits a better-matched modulus with the matrix and enhanced dislocation mobility. The precipitation of α-Mg plays a pivotal role in significantly improving the ductility of the alloy. This work contributes to the understanding of the complex interplay between alloy composition, grain boundary precipitates, and plasticity, as well as brings insights to guide interfacial control in the development of advanced Mg-Li-Al alloys for structural applications.

The Effects of Microstructure Refinement and Coincidence Site Lattice Boundaries on the Plasticity of FeCrAlY Alloys

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Modification and refinement of Fe-containing phases, mechanical properties and strengthening mechanisms in Al–Fe alloys via Cr alloying and continuous rheo-extrusion

High-strength and tunable plasticity in sputtered Al–Cr alloys with multistage phase transformations

Plasticity improvement of Fe-13Cr-6Al-2Mo-0.5Nb alloy with yttrium addition by hindering Laves phase precipitation

Overcoming plasticity reduction in a severely deformed nano-grained metastable alloy

Optimizing transformation-induced plasticity in CoCrNi alloys by combined grain refinement and chemical tuning

Microstructure and deformation behavior of two TWIP/TRIP high entropy alloys upon grain refinement

Influence of Cold-Rolling Reduction on Microstructure and Tensile Properties of Nuclear FeCrAl Alloy with Low Cr and Nb Contents

Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries

Quantifying the effects of grain refiners (AlTiB and Y) on microstructure and properties in W319 alloys

Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting

The Influence of Cr Addition on the Microstructure and Mechanical Properties of Fe-25Mn-10Al-1.2C Lightweight Steel

Effect of Grain Size on the Plastic Deformation Behaviors of a Fe-18Mn-1.3Al-0.6C Austenitic Steel

Deformation mechanism and microstructure evolution during superplastic deformation of friction stir processed CoCrFeNiMn high entropy alloy

Effects of multi-scale precipitated phases on the toughness of FeCrAl alloy investigated by varying cooling mode and RE doping

Effect of Rolling Reduction on Microstructures and Mechanical Properties of Sc-Containing Al-3.2Cu-1.5Li Alloy

Control of Laves Precipitation in a FeCrAl-based Alloy Through Severe Thermomechanical Processing

Influence of Zr on grain orientation, texture, and mechanical properties in hot- and warm-rolled FeCrAl alloys

Yttrium effect on 475 °C brittleness of Fe–13Cr–6Al–2Mo-0.5Nb-0.15Zr alloy

Effect of Cr on the phase transformation and interphase nanoprecipitation behaviours of high-strength microalloyed steels