Abstract:Irradiation assisted stress corrosion cracking (IASCC) is known to be a combination of applied stress, and a corrosive environment in irradiated materials, but an appropriate understanding of how each of these components affects cracking is not yet clear. In this work, we isolate the role of grain boundary (GB) oxidation in IASCC. For this purpose, solution-annealed 304L stainless steel irradiated in reactor to 5.4 or 69 dpa was studied using a miniaturized four-point bend technique. Two modes of bend tests were conducted; straining in simulated pressurized water reactor primary water (PW) at 320 °C in an incremental manner, and pre-oxidation in PW at 320 °C without application of stress followed by dynamic straining in purified Ar at the same temperature until crack initiation. Exposure of the 5.4 dpa sample for 210 h in high temperature water initiated cracks in Ar at 60% of the yield stress, (0.6YS), whereas the companion sample of the same dose exposed for 1010 h cracked in Ar at 0.5YS. The long-term exposure in water led to GB oxidation that ultimately lowered the crack initiation stress. Dynamic straining in water resulted in larger crack lengths and greater crack depths indicating stress accelerated oxidation and cracking. Dislocation pile-ups at dislocation channel-grain boundary sites provide an amplification of the applied stress to a level consistent with the fracture stress of the grain boundary oxide, providing an explanation for IASCC that occurs at applied stresses well below the irradiated yield stress of the alloy. There was no evidence of cracking upon straining of an unoxidized 69 dpa sample in Ar to well above yield, confirming that the irradiated state is not inherently susceptible to intergranular (IG) cracking and that oxidized GBs are responsible for initiation of IG cracking.

Mechanism of Chlorine-Induced Stress Corrosion Cracking of Two 304 SS Heats in Simulated Marine Environment Through in Situ X-ray Tomography and Diffraction: Role of Deformation Induced Martensite and Crack Branching

STRESS CORROSION CRACKING BEHAVIOR OF A NEW KIND OF ULTRAHIGH STRENGTH STEEL Cr12Ni4Mo2Co14 IN ACID ENVIRONMENT

Nanoindentation Investigation of Chloride-Induced Stress Corrosion Crack Propagation in an Austenitic Stainless Steel Weld

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Towards Understanding Stress Corrosion Cracking of Austenitic Stainless Steels Exposed to Realistic Sea Salt Brines

Chloride-Induced Stress Corrosion Cracking of Friction Stir-Welded 304L Stainless Steel: Effect of Microstructure and Temperature

A Three-Dimensional Model of Non-Slipping Stress Corrosion Cracking under Low Loads

An Investigation of Corrosion-Induced Stress During SCC

Crystallographic effects on transgranular chloride-induced stress corrosion crack propagation of arc welded austenitic stainless steel

Decoupling the roles of grain boundary oxidation and stress in IASCC of neutron-irradiated 304L stainless steel

Stress-Corrosion Cracking Sensitization by Hydrogen upon Oxidation of Nickel-base Alloys by Water – an Experiment-Guided First-Principles Study

Stress Corrosion Cracking of 2205 Duplex Stainless Steel with Simulated Welding Microstructures in Simulated Sea Environment at Different Depths

Insights from electrochemical crack tip modeling of atmospheric stress corrosion cracking

A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel

Stress Corrosion Cracking at Low Loads: Surface Slip and Crystallographic Analysis

Stress Corrosion Cracking of E690 Steel As a Welded Joint in a Simulated Marine Atmosphere Containing Sulphur Dioxide

Diffusible Hydrogen Facilitated Stress Corrosion Cracking in 316 Stainless Steel Using In-Situ Gaseous Hydrogen Charging in Simulated PWR Environment

Chloride-induced stress corrosion cracking in Austenitic steels for SNF storage canisters - Recent understanding and advances in mitigation and repair

Stress corrosion cracking of TC4 ELI alloy with different microstructure in 3.5% NaCl solution

How irradiation promotes intergranular stress corrosion crack initiation

Effects of composition and microstructure on oxidation and stress corrosion cracking susceptibility of stainless steel claddings in hydrogenated PWR primary water