Abstract:Abstract It is a very difficult work to sinter K 0.5 Na 0.5 NbO 3 (KNN)-based materials with good reduction resistance in strong reducing atmosphere. 0.945K 0.48 Na 0.52 Nb 0.96 Ta 0.04 O 3 −0.055BaZrO 3 + 0.03ZrO 2 + y mol%MnO (KNNT−0.055BZ + 0.03Zr + y Mn) ceramics sintered in reducing atmosphere were prepared successfully by conventional solid-state reaction methods. MnO dopant increases grain size at y = 5–8 due to strong lattice distortion and then decreases grain size at y = 9 due to much Mn 4 Nb 2 O 9 accumulated at the grain boundary. MnO dopant as an excellent sintering aid can effectively reduce volatilization of alkali metal by decreasing the sintering temperature ( T sinter ). Reducing alkali metal volatilization can greatly reduce oxygen vacancies and improve piezoelectric properties. MnO dopant can improve the anti-reduction properties. The KNNT−0.055BZ + 0.03Zr + y Mn ceramics at y = 6–9 show outstanding anti-fatigue of unipolar piezoelectric strain under the synergistic effect of reduced oxygen vacancies due to reduced volatilization and increased grain size. Piezoelectric properties and temperature stability of KNNT−0.055BZ + 0.03Zr ceramics sintered in reducing atmosphere are improved simultaneously by MnO dopant. Optimum inverse piezoelectric coefficient ( d 33 * ) of ceramics at y = 8 reaches up to 480 pm/V under low driving electric field E = 20 kV/cm at room temperature, and its temperature stability of d 33 * reaches 158 °C. It will be an excellent lead-free material candidate for the preparation of multilayer piezoelectric actuators co-fired with nickel electrode.

Correction: Improving the Piezoelectric Strain and Anti-Reduction Properties of K0.5Na0.5NbO3-based Ceramics Sintered in a Reducing Atmosphere

Correction: A High Temperature Stable Piezoelectric Strain of KNN-based Ceramics

Defect Control for Enhanced Piezoelectric Properties in Sno2 and Zro2 Co-Modified Knn Ceramics Fired under Reducing Atmosphere

Correction: Growth Mechanism of Ceria Nanorods by Precipitation at Room Temperature and Morphology-Dependent Photocatalytic Performance

Improving High-Field Strain and Temperature Stability on KNN-based Ceramics Sintered in Reducing Atmosphere Via Defect Engineering

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

Ultrahigh Electric‐field‐induced Strain in KNN‐based Piezoelectric Ceramics Sintered in Reducing Atmosphere

Simultaneously Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics Via Defect Design

Correction: Bimetallic CeZr 5 -UiO-66 as a highly efficient photocatalyst for the nitrogen reduction reaction

Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere

Correction: Synthesis of lead-free Cs 3 Sb 2 Br 9 perovskite alternative nanocrystals with enhanced photocatalytic CO 2 reduction activity

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Correction: Promoting nitrate electroreduction to ammonia over A-site deficient cobalt-based perovskite oxides

Improving fatigue properties, temperature stability and piezoelectric properties of KNN-based ceramics via sintering in reducing atmosphere

Correction: in Situ Study of the Catalytic Mechanism for the Oxygen Reduction Reaction on a Polypyrrole Modified Carbon Supported Cobalt Hydroxide Cathode in Direct Borohydride Fuel Cells.

Defect engineering of high-performance potassium sodium niobate piezoelectric ceramics sintered in reducing atmosphere

Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

Correction: Anion exchange-induced single-molecule dispersion of cobalt porphyrins in a cationic porous organic polymer for enhanced electrochemical CO<sub>2</sub> reduction <i>via</i> secondary-coordination sphere interactions

Defect Suppression in CaZrO3‐modified (K, Na)NbO3‐based Lead‐free Piezoceramic by Sintering Atmosphere Control

Correction: Additive-mediated intercalation and surface modification of MXenes

Correction: Zhou et al. Effect of Zirconium Doping on Electrical Properties of Aluminum Oxide Dielectric Layer by Spin Coating Method with Low Temperature Preparation. Coatings 2020, 10, 620