Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Improving fatigue properties, temperature stability and piezoelectric properties of KNN-based ceramics via sintering in reducing atmosphere

Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

Ultrahigh Electric‐field‐induced Strain in KNN‐based Piezoelectric Ceramics Sintered in Reducing Atmosphere

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Simultaneously Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics Via Defect Design

Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

Improving High-Field Strain and Temperature Stability on KNN-based Ceramics Sintered in Reducing Atmosphere Via Defect Engineering

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Piezoelectric Properties and Temperature Sensitivity for CaZrO3 Doped KNN-based Ceramics Sintered in Reducing Atmosphere

Improving densification and electrical properties of KNN-based lead-free piezoceramics via two-step sintering method

A new concept to enhance piezoelectricity and temperature stability in KNN ceramics

Temperature Stability and Electrical Properties of MnO‐doped KNN‐based Ceramics Sintered in Reducing Atmosphere

BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics

Effect of Sintering Conditions on the Electrical Properties of Lead-Free Piezoelectric Potassium Sodium Niobate-Based Ceramics

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Enhanced Piezoelectric Properties and Temperature Stability in KNN-based Textured Ceramics

The structural origin of enhanced piezoelectric performance and stability in lead free ceramics

Defect Control for Enhanced Piezoelectric Properties in Sno2 and Zro2 Co-Modified Knn Ceramics Fired under Reducing Atmosphere