Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Piezoelectric Properties and Temperature Sensitivity for CaZrO3 Doped KNN-based Ceramics Sintered in Reducing Atmosphere

A high temperature stable piezoelectric strain of KNN-based ceramics

Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics

Temperature Stability and Electrical Properties of MnO‐doped KNN‐based Ceramics Sintered in Reducing Atmosphere

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

The Effect of Microstructure on Piezoelectric Properties and Temperature Stability for MnO Doped KNN-based Ceramics Sintered in Different Atmospheres

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Phase transition, microstructure and electrical properties of K1‐xNaxNbO3‐based ceramic sintered in reducing atmosphere

Enhanced electrical properties in KNN-based ternary ceramics with high Curie temperature

Preparation and Characterization on Piezo-/Ferro-electric Properties Of(1-X)(knn+lt)+xbi Ceramics

Temperature-insensitive KNN-based Ceramics by Elevating O-T Phase Transition Temperature and Crystal Texture

Ultrahigh Electric‐field‐induced Strain in KNN‐based Piezoelectric Ceramics Sintered in Reducing Atmosphere

Enhanced piezoelectric properties in 0.96(K0.48Na0.52)(Nb1−xTax)O3–0.04(Bi0.5Ag0.5)ZrO3 lead-free ceramics

Investigation of High Piezoelectric Properties of KNNSb-SrxBNZ Ceramics

Crystallographic Texture and Phase Structure Induced Excellent Piezoelectric Performance in KNN‐based Ceramics

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics