Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Ultrahigh Electric‐field‐induced Strain in KNN‐based Piezoelectric Ceramics Sintered in Reducing Atmosphere

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

A high temperature stable piezoelectric strain of KNN-based ceramics

Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

High Temperature-Insensitive Electrostrain Obtained in (K, Na)NbO3-Based Lead-Free Piezoceramics

Exceptional Electrostrain with Minimal Hysteresis and Superior Temperature Stability under Low Electric Field in KNN-based Lead-Free Piezoceramics

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Piezoelectric Properties and Temperature Sensitivity for CaZrO3 Doped KNN-based Ceramics Sintered in Reducing Atmosphere

Improving fatigue properties, temperature stability and piezoelectric properties of KNN-based ceramics via sintering in reducing atmosphere

Defect Control for Enhanced Piezoelectric Properties in Sno2 and Zro2 Co-Modified Knn Ceramics Fired under Reducing Atmosphere

Improving High-Field Strain and Temperature Stability on KNN-based Ceramics Sintered in Reducing Atmosphere Via Defect Engineering

Enhanced temperature stability of electric-field-induced strain in KNN-based ceramics

Temperature-Insensitive (K,Na)Nbo3-Based Lead-Free Piezoactuator Ceramics

Temperature‐Insensitive (K,Na)NbO<sub>3</sub>‐Based Lead‐Free Piezoactuator Ceramics

Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics

Defect engineering of high-performance potassium sodium niobate piezoelectric ceramics sintered in reducing atmosphere

Composition-insensitive enhanced piezoelectric properties in SrZrO3 modified (K, Na)NbO3-based lead-free ceramics

Ultrahigh electro-strain in acceptor-doped KNN lead-free piezoelectric ceramics via defect engineering

Mitigation Of Thermal And Fatigue Behavior In K0.5na0.5nbo3-Based Lead Free Piezoceramics