Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Defect Suppression in CaZrO3‐modified (K, Na)NbO3‐based Lead‐free Piezoceramic by Sintering Atmosphere Control

Defect Control for Enhanced Piezoelectric Properties in Sno2 and Zro2 Co-Modified Knn Ceramics Fired under Reducing Atmosphere

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Defect engineering of high-performance potassium sodium niobate piezoelectric ceramics sintered in reducing atmosphere

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

Ultrahigh Electric‐field‐induced Strain in KNN‐based Piezoelectric Ceramics Sintered in Reducing Atmosphere

Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

Defect engineering of BCZT-based piezoelectric ceramics with high piezoelectric properties

Atmospheric Controlled Processing Enabling Highly Textured NKN with Enhanced Piezoelectric Performance

Defects Engineered Ferroelectricity and Electrocaloric Effect in Pb0.7Ba0.3ZrO3 Ceramics

Improving High-Field Strain and Temperature Stability on KNN-based Ceramics Sintered in Reducing Atmosphere Via Defect Engineering

Improving densification and electrical properties of KNN-based lead-free piezoceramics via two-step sintering method

A high temperature stable piezoelectric strain of KNN-based ceramics

Enhanced piezoelectric properties in 0.96(K0.48Na0.52)(Nb1−xTax)O3–0.04(Bi0.5Ag0.5)ZrO3 lead-free ceramics

Enhanced Electromechanical Performance in Lead-free (Na,K)NbO 3 -Based Piezoceramics via the Synergistic Design of Texture Engineering and Sm-Modification

Defect Engineering Boosts Ferroelectricity in Pb0.9Ba0.1ZrO3 Ceramic

Enhanced Electromechanical Properties in MnCO3‐modified Pb(Ni,Nb)O3–PbZrO3–PbTiO3 Ceramics Via Defect and Domain Engineering

Piezoelectric Properties and Temperature Sensitivity for CaZrO3 Doped KNN-based Ceramics Sintered in Reducing Atmosphere

Ferroelectric and Piezoelectric Properties of 0.95(na0.49k0.49li0.02)(nb0.8ta0.2)o3–0.05cazro3 Lead-Free Ceramics Prepared by Spark Plasma Sintering