Correction: A High Temperature Stable Piezoelectric Strain of KNN-based Ceramics

Zhenyong Cen,Yu Huan,Wei Feng,Yongtao Yu,Peiyao Zhao,Lingling Chen,Chaoqiong Zhu,Longtu Li,Xiaohui Wang

DOI: https://doi.org/10.1039/c8ta90255k

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘A high temperature stable piezoelectric strain of KNN-based ceramics’ by Zhenyong Cen et al., J. Mater. Chem. A, 2018, 6, 19967–19973.

What problem does this paper attempt to address?

Correction: Improving the Piezoelectric Strain and Anti-Reduction Properties of K0.5Na0.5NbO3-based Ceramics Sintered in a Reducing Atmosphere

Zhenyong Cen,Ze Xu,Longtu Li,Xiaohui Wang

DOI: https://doi.org/10.1039/d1dt90194j

IF: 4

2021-01-01

Dalton Transactions

Abstract:Correction for 'Improving the piezoelectric strain and anti-reduction properties of K0.5Na0.5NbO3-based ceramics sintered in a reducing atmosphere' by Zhenyong Cen et al., Dalton Trans., 2021, 50, 8851-8862, DOI: 10.1039/D1DT01059J.
Simultaneously Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics Via Defect Design

Zhenyong Cen,Fuzhi Cao,Meiyi Feng,Ziting Li,Ze Xu,Gengguang Luo,Nengneng Luo,Kaizhong Xie,Longtu Li,Xiaohui Wang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2022.10.061

IF: 5.7

2022-01-01

Journal of the European Ceramic Society

Abstract:Piezoelectric strain and its temperature stability of KNN-based ceramics sintered in reducing atmosphere are improved simultaneously via defects design of Mn doping. MnO and MnO2 as raw materials have an impact on defects in KNN-based ceramics. When the dopant changes from MnO to MnO2, the defects (Mn-Nb ''', Mn-K(center dot), Mn-Na(center dot)) concentration decrease and defects (Mn-Nb') increase. Defect dipoles (Mn-K(center dot)-V-K', Mn-Na(center dot)-V-Na', Mn-Nb '''-V-o(center dot center dot)) in poled and aged 0.94 K0.48Na0.52Nb0.96Ta0.04O3-0.06BaZrO3 + 0.08MnO ceramics form a strong restoring force for domain switching, which enhances the reversibility of the non-180. domains switching and then significantly improves piezoelectric strain. The stable defect dipoles ( Mn-K(center dot)-V-K', Mn-Na(center dot)-V-Na') form so that the reversibility of the non-180. domains switching can be preserved to high temperature. This defect dipoles design provides a general method to achieve large piezoelectric strain (582 pm/V@20 kV/cm) and excellent temperature stability (T-90 =210 degrees C).
Correction: Growth Mechanism of Ceria Nanorods by Precipitation at Room Temperature and Morphology-Dependent Photocatalytic Performance

Zhao Liu,Xiaojing Li,Mohannad Mayyas,Pramod Koshy,Judy N. Hart,Charles C. Sorrell

DOI: https://doi.org/10.1039/c7ce90142a

IF: 3.756

2017-01-01

CrystEngComm

Abstract:Correction for ‘Growth mechanism of ceria nanorods by precipitation at room temperature and morphology-dependent photocatalytic performance’ by Zhao Liu et al., CrystEngComm, 2017, 19, 4766–4776.
Grain Configuration Effect on the Phase Transition, Piezoelectric Strain and Temperature Stability of KNN-based Ceramics

Zhenyong Cen,Yan Yu,Peiyao Zhao,Lingling Chen,Chaoqiong Zhu,Longtu Li,Xiaohui Wang

DOI: https://doi.org/10.1039/c8tc05253k

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:Lead-free 0.985(0.96KNNT–0.04BNKZ)–0.015CZ ceramics were sintered at 1150–1190 °C.
Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics

Zhenyong Cen,Wei Feng,Peiyao Zhao,Lingling Chen,Chaoqiong Zhu,Yan Yu,Longtu Li,Xiaohui Wang

DOI: https://doi.org/10.1111/jace.16136

IF: 4.186

2018-01-01

Journal of the American Ceramic Society

Abstract:Lead-free 0.99(0.96K(0.46)Na(0.54)Nb(1-x)Ta(x)O(3)-0.04Bi(0.5)(Na0.82K0.18)(0.5)ZrO3)-0.01CaZrO(3) (0.99(0.96KNNTax-0.04BNZ)-0.01CZ) ceramics were prepared by a solid-state sintering method. Ta2O5 doped in the 0.99(0.96KNNTax-0.04BNZ)-0.01CZ ceramics results in a phase structure transition from the orthorhombic (O)/tetragonal (T) phase to the rhombohedral (R)/T phase. The Ta2O5 dopant induces a decrease in the average grain size from similar to 1.70 to similar to 0.69 mu m. At x = 0.02 and 0.04, the ceramics have a high reverse piezoelectric coefficient (similar to 500 pm/V under 25 kV/cm). The ceramics with x = 0.04 show an optimal level of unipolar strain, reaching 0.17% under 35 kV/cm at room temperature, and their field-induced strain varies <10% in the temperature range from 25 to 135 degrees C. The presence of the O phase in the polymorphic phase boundary (PPB) improves the temperature stability the reverse piezoelectric coefficient (d33*). Obtaining KNN-based ceramics with good piezoelectric properties and weak temperature sensitivity by designing a R/O/T phase boundary and controlling the average grain size to the submicrometer level is highly feasible.
Improvement in the Piezoelectric Temperature Stability of (k0.5na0.5)nbo3 Ceramics

JingBo Zhao,HongLiang Du,ShaoBo Qu,HongMei Zhang,Zhuo Xu

DOI: https://doi.org/10.1007/s11434-011-4439-6

2011-01-01

Abstract:Through an analysis of the temperature stability of (K0.5Na0.5) NbO3 (KNN) based ceramics and KNN solid solutions, we propose a method to enhance the temperature stability of KNN materials. These materials are valuable for their piezoelectric properties. To verify the feasibility of this method, 0.9 (K1−x Na x ) NbO3-0.06LiNbO3-0.04CaTiO3(KNLN-CaTiO3) ceramics were designed, and their structure and properties were studied. The results show that KNLN-CaTiO3(x = 0.54) ceramics have a good temperature stability over a wide temperature range (25–320°C). Also, they have good piezoelectric properties (d 33=152 pC/N in x=0.54). This result confirms the feasibility of our proposed solution for improving the piezoelectric properties of KNN-based ceramics that have poor temperature stability.
High Piezoelectric Performance of KNN-Based Ceramics over a Broad Temperature Range through Crystal Orientation and Multilayer Engineering

Guangrui Lu,Yunting Li,Rui Zhao,Yan Zhao,Jiaqi Zhao,Wangfeng Bai,Jiwei Zhai,Peng Li

DOI: https://doi.org/10.3390/molecules29194601

IF: 4.6

2024-09-28

Molecules

Abstract:Uninterrupted breakthroughs in the room temperature piezoelectric properties of KNN-based piezoceramics have been witnessed over the past two decades; however, poor temperature stability presents a major challenge for KNN-based piezoelectric ceramics in their effort to replace their lead-based counterparts. Herein, to enhance temperature stability in KNN-based ceramics while preserving the high piezoelectric response, multilayer composite ceramics were fabricated using textured thick films with distinct polymorphic phase transition temperatures. The results demonstrated that the composite ceramics exhibited both outstanding piezoelectric performance (d33~467 ± 16 pC/N; S~0.17% at 40 kV/cm) and excellent temperature stability with d33 and strain variations of 9.1% and 2.9%, respectively, over a broad temperature range of 25–180 °C. This superior piezoelectric temperature stability is attributed to the inter-inhibitive piezoelectric fluctuations between the component layers, the diffused phase transition, and the stable phase structure with a rising temperature, as well as the permanent contribution of crystal orientation to piezoelectric performance over the studied temperature range. This novel strategy, which addresses the piezoelectric and strain temperature sensitivity while maintaining high performance, is well-positioned to advance the commercial application of KNN-based lead-free piezoelectric ceramics.

chemistry, multidisciplinary,biochemistry & molecular biology
A high temperature stable piezoelectric strain of KNN-based ceramics

Zhenyong Cen,Yu Huan,Wei Feng,Yan Yu,Peiyao Zhao,Lingling Chen,Chaoqiong Zhu,Longtu Li,Xiaohui Wang

DOI: https://doi.org/10.1039/c8ta07908k

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Lead-free (1 - x)(0.96K(0.46)Na(0.54)Nb(0.98)Ta(0.02)O(3)-0.04Bi(0.5)(Na0.82K0.18) 0.5ZrO3)-xCaZrO(3) ((1 - x)(0.96KNNT-0.04BNKZ)-xCZ) piezoelectric ceramics were prepared by the conventional solid-state reaction method. The CaZrO3 dopant can induce a coexisting phase boundary with the transition from the orthorhombic/tetragonal phase to the R phase. Domains that exist across the grain boundary within neighboring grains appear in the ceramics with x = 0.01, which can result in an increase in ferroelectricity due to its long-range order organization. The CaZrO3 dopant results in the formation of polar nanodomains and induces the appearance of diffuse ferroelectrics. The ceramics with x = 0.01 show optimal piezoelectric properties (d(33) = 300 pC N-1 and d*(33) = 500 pm V-1 at 25 kV cm(-1)). Meanwhile, their high level of unipolar strain reaches up to 0.175% at 35 kV cm(-1) at room temperature, and their field-induced strain varies less than 10% from room temperature to 120 degrees C. The ceramics with x = 0.02 possess a remarkably high temperature stability of d*(33) (T-e = 200 degrees C). For x = 0.005-0.025, a higher amount of the CaZrO3 dopant can obviously improve the temperature stability of d*(33): The (1 - x)(0.96KNNT-0.04BNKZ)-xCZ system is a promising lead-free piezoelectric candidate material for commercial applications.
Enhanced Piezoelectric Properties and Temperature Stability in KNN-based Textured Ceramics

Yan Lin,Ru Wang,Jiawei Qu,Shuo Gao,Yi Zhang,Junli Yan,Jigong Hao,Peng Li,Wei Li

DOI: https://doi.org/10.1142/s2010135x22440064

2022-01-01

Journal of Advanced Dielectrics

Abstract:Considering the advantages of high Curie temperature and environment-friendly nature of KNN piezoelectric ceramics, the limitation of weak piezoelectric response and their temperature sensitivity to applications is worth exploring. Herein, the <001> textured (1-[Formula: see text])(K[Formula: see text]Na[Formula: see text])(Nb[Formula: see text]Sb[Formula: see text])O3-[Formula: see text](Bi[Formula: see text]Na[Formula: see text])HfO3([Formula: see text] = 0.01−0.045) lead-free ceramics were synthesized by templated grain-growth method. The high piezoelectric performance (d[Formula: see text] of 474 pC/N and strain of 0.21%) and excellent temperature stability (unipolar strain maintained within 4.3% change between 30[Formula: see text]C and 165[Formula: see text]C) were simultaneously achieved in the textured KNNS-0.03BNH ceramics. The high piezoelectric performance can be attributed to the summation of the crystallographic anisotropy and phase structure contributions in <001> textured ceramics. The superior temperature stability of piezoelectric properties can be interpreted by the contribution of crystal anisotropy to piezoelectric properties reduces the effect of phase transition on piezoelectric properties deterioration. This study provides an effective strategy for simultaneously achieving high piezoelectric properties and superior temperature stability in KNN-based textured ceramics.
Exceptional Electrostrain with Minimal Hysteresis and Superior Temperature Stability under Low Electric Field in KNN-based Lead-Free Piezoceramics

Huan Liu,Yijin Hao,Ziqi Yang,Tianyi Feng,Bin Su,Xin Zhang,Mengping Xue,Bo-Ping Zhang,Jing-Feng Li

DOI: https://doi.org/10.26599/jac.2024.9220861

IF: 11.534

2024-01-01

Journal of Advanced Ceramics

Abstract:Over the past two decades, (K0.5Na0.5)NbO3 (KNN)-based lead-free piezoelectric ceramics have made significant progress. However, attaining a high electrostrain with remarkable temperature stability and minimal hysteresis under low electric fields has remained a significant challenge. To address this long-standing issue, we have employed a collaborative approach that combines defect engineering, phase engineering, and relaxation engineering. The LKNNS-6BZH ceramic, when sintered at T-sint = 1170 degrees C, demonstrates an impressive electrostrain with a d(33)* value of 0.276% and 1379 pm.V-1 under 20 kV.cm(-1), which is comparable to or even surpasses that of other lead-free and Pb(Zr,Ti)O-3 ceramics. Importantly, the electrostrain performance of this ceramic remains stable up to a temperature of 125 degrees C, with the lowest hysteresis observed at 9.73% under 40 kV.cm(-1). These excellent overall performances are attributed to the presence of defect dipoles involving V-A'-V-O" and, (BNb)' -V-O" the coexistence of R-O-T multiphase, and the tuning of the trade-off between long-range ordering and local heterogeneity. This work provides a lead-free alternative for piezoelectric actuators and a paradigm for designing piezoelectric materials with outstanding comprehensive performance under low electric fields.
Meticulously tailoring phase boundary in KNN‐based ceramics to enhance piezoelectricity and temperature stability

Yuan Cheng,Jie Xing,Xu Li,Lixu Xie,Yining Xie,Jianguo Zhu,Tan Zhi

DOI: https://doi.org/10.1111/jace.18471

IF: 4.186

2022-04-28

Journal of the American Ceramic Society

Abstract:Although KNN‐based ceramics with high electrical properties are obtained through a variety of strategies, the temperature sensitivity is still one of the key technical bottlenecks hindering practical applications. Here, we use a new strategy, meticulously tailoring phase boundary, to refine the ferroelectric boundary of KNN‐based ceramics, leading to a high piezoelectricity companied with improving temperature stability. The highest d33 value in this system reaches 501 pC/N with a TC ∼240°C, while a large strain ∼0.134% can be kept with 10% lower deterioration until 100°C. The origin of high piezoelectricity is mainly attributed to the well‐preserved multiphase coexistence (MPC) and the appearance of nanodomains, which greatly facilitate the polarization rotation. Instead of the changed intrinsic thermal insensitivity, the precision phase boundary engineering plays an important role in strengthening temperature stability of electric‐induced strain. This work provides a simple and effective method to obtain both high electrical properties and excellent thermal stability in KNN‐based ceramics, which is expected to promote the practical applications in the future.This article is protected by copyright. All rights reserved

materials science, ceramics
Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Can Wang,Bijun Fang,Yunhao Qu,Zhihui Chen,Shuai Zhang,Jianning Ding

DOI: https://doi.org/10.1016/j.jallcom.2019.153043

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:0.95 (Li0.04Na0.48K0.48)(Nb0.94Sb0.06)O-3-0.05(Ba0.5Ca0.5)(Zr0.5Hf0.5)O-3 (LNKNbS-BCZH) lead-free piezoelectric ceramics were prepared by the solid-state reaction method via the two-step sintering process. Via composition designing pure perovskite LNKNbS-BCZH ceramics are synthesized, which present complex coexistence of orthogonal and tetragonal ferroelectric phases in rhombohedral matrix and high densification depending greatly on the two-step sintering conditions. Due to the addition of some metal elements and the second component BCZH, there appear dielectric peak at Curie temperature T-c/T-m of similar to 200 degrees C and dielectric shoulder around room temperature, and the LNKNbS-BCZH ceramics approach to normal ferroelectrics with some diffused phase transition characteristic. Excellent ferroelectricity and piezoelectricity are obtained via composition designing and two-step sintering, in which the LNKNbS-BCZH ceramics sintered at 1180 degrees C for 45 min and 1050 degrees C for 8 h exhibit the largest piezoelectric constant of 232 pC/N, which can be increased further by room-temperature aging and re-poling. The safe working temperature for piezoelectric applications of the LNKNbS-BCZH ceramics should be below 100 degrees C. (C) 2019 Published by Elsevier B.V.
Improving High-Field Strain and Temperature Stability on KNN-based Ceramics Sintered in Reducing Atmosphere Via Defect Engineering

Zhenyong Cen,Meiyi Feng,Fuzhi Cao,Yuqi Jiang,Ze Xu,Changrong Zhou,Ke Wang,Nengneng Luo

DOI: https://doi.org/10.1016/j.jmat.2023.11.018

IF: 8.589

2024-01-01

Journal of Materiomics

Abstract:High-field strain and its temperature stability of (1-x) K0.48Na0.52Nb0.96Ta0.04O3-xBaZrO3+8%MnO+3% ZrO2 (in mole, KNNT-xBZ+8Mn) ceramics sintered in reducing atmosphere are improved simultaneously via defect design in A and B site. There is a conducting type transition from n-type to p-type at x = 0.07. The BaZrO3 dopant not only induces the increase of defects (Zr0Nb, Ba$Na, Ba$K) concentration, but also results in the increase of defect (MnNb) concentration, because more Mn ions as +2 oxidation state in ceramics is triggered by BaZrO3 doping modification. Defect dipoles (Mn000Nb - V$$ o, Zr0Nb-V$$o , Ba$Na-V0Na, Ba$K-V0K) in poled and aged ceramics enhance the reversibility of the non-180 degrees domains switching, which increases the high-field strain of KNNT-xBZ+8Mn ceramics. The reversibility of non-180 degrees domain switching can be preserved to high temperature due to stable defect dipoles (Ba$Na-V0Na, Ba$K-V0K) in A-site. The KNNT-xBZ+8Mn ceramics at x = 0.07 show the largest high-field strain coefficient (543 pm/ V@20 kV/cm) and the highest temperature stability (125 degrees C). The KNNT-xBZ+8Mn ceramic is a lead-free material with great potential to be applied in the fabrication of multilayer ceramic actuators with Ni inner electrodes in the future. (c) 2024 The Authors. Published by Elsevier B.V. on behalf of The Chinese Ceramic Society. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
A new concept to enhance piezoelectricity and temperature stability in KNN ceramics

Xiang Lv,Jiagang Wu,Xi-xiang Zhang

DOI: https://doi.org/10.1016/j.cej.2020.126215

IF: 15.1

2020-12-01

Chemical Engineering Journal

Abstract:To relieve the sensitivity of piezoelectric coefficient (d33) to composition and strengthen temperature stability of strain in potassium sodium niobate {(K, Na)NbO3, KNN} ceramics, we proposed a new concept, tuning the trade-off between long-range ordering (LRO) and polar nanoregions (PNRs), and realized it by tailoring the content of bismuth (Bi) in an already-constructed multiphase coexistence, namely, 0.96(K0.48Na0.52)(Nb0.955Sb0.045)O3-0.04(BixNa4-3x)0.5ZrO3-0.3 mol%Fe2O3 ceramics. We obtained not only the high retention of > 83% at x = 0.80–1.10 in d33 but also higher d33 at x = 0.90–0.95, relieving the sensitivity of d33 to composition. We also obtained not only the enhanced strain but also the high retention of ≥ 79% over a wide temperature range of 20–180 °C at x = 1.10, irrespective of the electric field, strengthening the temperature stability. We demonstrated that high d33 values hinge on the trade-off between LRO and PNRs, and the enhanced temperature stability of strain originates from the diffused multiphase coexistence and the reduced contribution of domain switching. Therefore, the new concept helps further design high-performance KNN-based ceramics for practical application.

engineering, chemical, environmental
Correction: Ultrahigh thermal conductive polymer composites by the 3D printing induced vertical alignment of carbon fiber

Zhenbang Zhang,Maohua Li,Yandong Wang,Wen Dai,Linhong Li,Yapeng Chen,Xiangdong Kong,Kang Xu,Rongjie Yang,Ping Gong,Jianxiang Zhang,Tao Cai,Cheng-Te Lin,Kazuhito Nishimura,Hao Nan Li,Nan Jiang,Jinhong Yu

DOI: https://doi.org/10.1039/d3ta90100a

IF: 11.9

2023-05-19

Journal of Materials Chemistry A

Abstract:Correction for 'Ultrahigh thermal conductive polymer composites by the 3D printing induced vertical alignment of carbon fiber' by Zhenbang Zhang et al. , J. Mater. Chem. A , 2023, https://doi.org/10.1039/D3TA01676E.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

Zhenyong Cen,Xiaohui Wang,Yu Huan,Yichao Zhen,Wei Feng,Longtu Li

DOI: https://doi.org/10.1111/jace.15462

IF: 4.186

2018-01-01

Journal of the American Ceramic Society

Abstract:Lead-free MnO-doped 0.955K(0.5)Na(0.5)NbO(3)-0.045Bi(0.5)Na(0.5)ZrO(3) (Abbreviated as KNN-0.045BNZ) ceramics have been prepared by the conventional solid-state sintering method in reducing atmosphere (po2=1x10(-10)atm) and air. For ceramics sintered in reducing atmosphere, only Mn2+ ions exist in ceramics who preferentially occupy the cation vacancies in A-site at x=0.2-0.4, whereas Mn2+ ions substitute for Zr4+ ions in B-site to form defects (MnZr) at x>0.4. For ceramics sintered in air, mixed Mn2+, Mn3+, and Mn4+ ions coexist here. The Mn2+ ions preferentially occupy the cation vacancies in A-site at x=0.2-0.4 and then Mn2+ ions substitute for Zr4+ ions in B-site at x>0.4. Meanwhile, the Mn3+ ions and Mn4+ ions substitute for Nb5+ ions in B-site to form defects at x=0.2-0.8. The , and dipolar defects show a positive dipolar defect contribution (DDC) to the whereas the dipolar defects show a negative DDC to the . The dipolar defects and can help improve the temperature stability of . The 0.4% MnO-doped KNN-0.045BNZ ceramics sintered in reducing atmosphere show excellent piezoelectric constant d(33)=300pC/N and 0.2% MnO-doped KNN-0.045BNZ ceramics sintered in air possess optimal piezoelectric constant d(33)=290pC/N.
High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Yi Chao Zhen,Zhen Yong Cen,Wei Feng,Xiao Hui Wang,Long Tu Li

DOI: https://doi.org/10.4028/www.scientific.net/ssp.281.628

2018-01-01

Abstract:Lead-free MnO doped 0.955K0.5Na0.5NbO3-0.045Bi0.5Na0.5ZrO3(abbreviate as KNN-0.045BNZ) ceramics have been prepared by a conventional solid-state sintering method in a reducing atmosphere. The addition of MnO suppresses grain growth and eliminates the liquid phase. MnO dopant changes the crystalline structures of KNN-0.045BNZ ceramics from the classical Morphotropic Phase Boundary (MPB) with rhombohedral phase (R) and tetragonal phase (T) to the suppressed MPB with R/T phase. The 0.4% MnO doped KNN-0.045BNZ ceramics show an excellent electrical properties with quasi static piezoelectric constantd33=300 pC/N, Curie temperatureTC= 350 °C, insulation resistivity ρ=4.83 × 1011(Ω・cm), and high field piezoelectric constants =438 pm/V (atEmax= 25 kV/cm). The results indicate that the 0.4%Mn doped KNN-0.045BNZ ceramic is a promising lead-free piezoelectric candidate material for commercial applications.
Simultaneous Enhancement of Piezoelectricity and Temperature Stability in KNN‐Based Lead‐Free Ceramics Via Layered Distribution of Dopants

Aizhen Song,Yixuan Liu,Tianyi Feng,Haitao Li,Yuanyuan Zhang,Xuping Wang,Lisha Liu,Bo‐Ping Zhang,Jing‐Feng Li

DOI: https://doi.org/10.1002/adfm.202204385

IF: 19

2022-06-10

Advanced Functional Materials

Abstract:KNN‐based lead‐free ceramics exhibit simultaneously an outstanding d33 and temperature stability in the range of 25–150 °C by introducing a layered distribution of key dopants in a monolithic ceramic with stepwise varied polymeric phase transition (PPT) temperatures along the thickness direction. These are attributed to the construction of spatially diffused PPTs in combination with the Maxwell–Wagner effect and intergranular stress. The past two decades have seen a great enhancement of piezoelectric coefficients (d33) to higher than 570 pC/N in (K, Na)NbO3 (KNN) piezoelectrics, but one notoriously unresolved issue is their severe temperature instability, obstructing them toward practical applications. The present work demonstrates a facile approach to overcome this problem by introducing a layered distribution of key dopants (Li and Sb) in a monolithic ceramic, featuring stepwise varied polymorphic phase transition (PPT) temperatures along the thickness direction. The dopant‐graded ceramic exhibits an outstanding d33 of 508 pC/N and a very large piezoelectric strain (Suni, of 0.18%). More importantly, an excellent temperature stability (d33 variation within 13% over the temperature range of 25–150 °C) is achieved, which is superior to that of most state‐of‐art KNN counterparts. These are attributed to the construction of spatially diffused PPT in combination with enhanced polarization, permittivity, and piezoresponse through interfacial effect, including the Maxwell–Wagner effect and intergranular stress by gradient doping. The results offer an alternative strategy for designing high‐performance piezoelectric materials with desirable temperature reliability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Bosen Li,Cheng Xiong,Guiyang Gao,Daqiang Gao

DOI: https://doi.org/10.1007/s10854-023-11845-1

2024-01-17

Journal of Materials Science Materials in Electronics

Abstract:KNN-based ceramics have gained considerable attention due to their excellent performances, cost-effectiveness, and potential applications in transducers. In order to accelerate the piezoelectric performances and temperature reliability of KNN-based ceramics, (1 − x )(K 0.48 Na 0.52 )(Nb 0.955 Sb 0.045 )O 3 − x (Bi 0.5 Na 0.5 )HfO 3 (abbreviated as KNNS- x BNH) ceramics were prepared. The study focused on investigating the impact of BNH components on their morphology, structure, piezoelectric performances, and temperature reliability of ceramics. This route is crucial for improving the overall performance of KNN-based ceramics. The synthetic piezoelectric ceramics have a typical perovskite structure, in which the optimized ceramic with x = 0.035 shows excellent piezoelectric properties: d 33 = 436 pC/N, k p = 0.56, d 33 * = 604 pm/V, T c = 253 °C, P r = 14.75 μC/cm 2 , E c = 957 V/mm, and S max = 0.18%. The co-occurrence of orthorhombic–tetragonal (O–T) phase, relaxation states, and their nanodomain structures contribute significantly to the excellent performance of ceramics with T Fs < 0.8‰ and T εr < 17‰. At the same time, it is verified that the presence of B-site defect dipoles in ceramics has an inactive effect on spontaneous polarization, which is evident in the decrease of d 33 * measured after polarization.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Broad Temperature Plateau for High Piezoelectric Coefficient by Embedding PNRs in Singe‐Phase KNN‐Based Ceramics

Yin Hua,Jin Qian,Yuxuan Yang,Siming Wang,Guanglong Ge,Yang Zhang,Jimin Lin,Jinfeng Lin,Haijun Wu,Fei Li,Jiwei Zhai

DOI: https://doi.org/10.1002/adfm.202414348

IF: 19

2024-10-30

Advanced Functional Materials

Abstract:Utilizing a synergistic optimization strategy of texturing and chemical component modulation, a novel microstructure of single‐phase embedded PNRs in KNN‐based ceramics is constructed, leading to a significant improvement of both piezoelectricity and temperature stability. Where the single‐phase favors dielectric smoothing, the PNRs facilitate the enhancement of piezoelectric activity. To date, the enormous potential of lead‐free piezoceramics in ultrasonic transducers and micro‐actuators has driven extensive research and development. Although the piezoelectric coefficient (d33) of lead‐free ceramics is improved unprecedentedly, the breakthrough in comprehensive performance is still a key issue, one of which is the inverse relationship between d33 and Curie temperature (TC), and the other is the temperature stability of piezoelectricity. Here, based on the synergistic optimization of the chemical component modulation and texture technology, the high Curie temperature (≈365 °C), high piezoelectric properties (d33 ≈331 pC/N, d33* ≈561 pm V−1) and advanced piezoelectric temperature stability are realized by embedded PNRs in the conceived and prepared lead‐free single phase 0.96((K0.5Na0.5)(Nb0.98Ta0.02)O3)‐0.01(Bi(Ni0.67Nb0.33)O3)‐0.03(Bi0.5K0.5)HfO3 texture ceramics. The d33 changes by only 2.0% when the temperature is increased from 25 to 100 °C (≈10.0% to 200 °C), while the electrical strain (d33*) changes by only 4.2% when the temperature is increased from 25 to 175 °C (≈9.8% to 200 °C), which is comparable to the commercial lead‐based materials (i.e., PZT‐4). This work demonstrates significant progress in the comprehensive piezoelectric performance (especially the piezoelectric temperature stability) of lead‐free ceramics and inspires further attempts to achieve high‐temperature piezoelectric properties.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Correction: A High Temperature Stable Piezoelectric Strain of KNN-based Ceramics

Correction: Improving the Piezoelectric Strain and Anti-Reduction Properties of K0.5Na0.5NbO3-based Ceramics Sintered in a Reducing Atmosphere

Simultaneously Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics Via Defect Design

Correction: Growth Mechanism of Ceria Nanorods by Precipitation at Room Temperature and Morphology-Dependent Photocatalytic Performance

Grain Configuration Effect on the Phase Transition, Piezoelectric Strain and Temperature Stability of KNN-based Ceramics

Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics

Improvement in the Piezoelectric Temperature Stability of (k0.5na0.5)nbo3 Ceramics

High Piezoelectric Performance of KNN-Based Ceramics over a Broad Temperature Range through Crystal Orientation and Multilayer Engineering

A high temperature stable piezoelectric strain of KNN-based ceramics

Enhanced Piezoelectric Properties and Temperature Stability in KNN-based Textured Ceramics

Exceptional Electrostrain with Minimal Hysteresis and Superior Temperature Stability under Low Electric Field in KNN-based Lead-Free Piezoceramics

Meticulously tailoring phase boundary in KNN‐based ceramics to enhance piezoelectricity and temperature stability

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Improving High-Field Strain and Temperature Stability on KNN-based Ceramics Sintered in Reducing Atmosphere Via Defect Engineering

A new concept to enhance piezoelectricity and temperature stability in KNN ceramics

Correction: Ultrahigh thermal conductive polymer composites by the 3D printing induced vertical alignment of carbon fiber

Defect engineering on phase structure and temperature stability of KNN‐based ceramics sintered in different atmospheres

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Simultaneous Enhancement of Piezoelectricity and Temperature Stability in KNN‐Based Lead‐Free Ceramics Via Layered Distribution of Dopants

BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Broad Temperature Plateau for High Piezoelectric Coefficient by Embedding PNRs in Singe‐Phase KNN‐Based Ceramics