Abstract:The microstructure, texture and tensile ductility of Mg–1Gd alloy were investigated and compared to pure Mg following multipass rolling at 300°C and isothermal annealing at 400°C. The addition of Gd weakens the basal texture in both the as-rolled and annealed conditions, which is related to the enhanced activity of pyramidal 〈c+a〉-slip during hot rolling and the suppressed grain boundaries migration due to Gd segregation at grain boundary during annealing. A large number of secondary twins and shear bands formed during hot rolling of Mg–1Gd sheet may serve as favorable nucleation sites for static recrystallization during annealing. The recrystallized grains at bands/twins in Mg–1Gd alloy display a wide spread of orientations, which is similar to that in conventional Mg alloys. Pure Mg sheet shows a strong {0002} 〈11−20〉 texture component due to the preferred growth of grains with the 〈11−20〉 component during annealing. However, Gd solute segregation at grain boundary could inhibit the preferred growth of 〈11−20〉 grains, leading to a weak basal texture and a single 〈10−10〉 texture component in Mg–1Gd alloy sheet after annealing. The room-temperature ductility is significantly improved by the addition of Gd, which is mainly attributed to the texture weakening and grain refinement.

Improved mechanical properties of Mg-1Gd alloy by cold rolling and electropulse treatment

Improved Mechanical Properties of Mg–9Al–1Zn Alloy by the Combination of Aging, Cold-Rolling and Electropulsing Treatment

Microstructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

Microstructure and Texture Evolution During Hot Rolling and Subsequent Annealing of Mg–1Gd Alloy

Effect of Cold Deformation on Microstructure and Mechanical Properties of Mg-8Gd-3Y-0.5Zr Alloy

Texture Modification of Magnesium Alloys During Electropulse Treatment

Influence of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Mg–9Al–1Zn Alloy Strip

Effect of cold rolling on the microstructure and mechanical properties of MG-8GD-3Y-0.5ZR alloy

Effects of Gd Concentration on Microstructure, Texture and Tensile Properties of Mg–Zn–Gd Alloys Subjected to Large Strain Hot Rolling

Strength Enhancement of Mg–3Gd–1Zn Alloy by Cold Rolling

Effect of Thermo-Mechanical Treatment on the Microstructure and Mechanical Properties of a Mg–6Gd–2Nd–0.5Zr Alloy

Microstructure and Mechanical Properties of Rolled Mg-12gd-3y-0.4zr Alloy Sheets

Enhancement of Ductility in Mg-3Al-1Zn Alloy with Tilted Basal Texture by Electropulsing

Deformation mechanisms and recrystallization behavior of Mg-3Al-1Zn and Mg-1Gd alloys deformed by electroplastic-asymmetric rolling

On the Texture Weakening During Electropulse Annealing Treatment of Mg-1Ce Alloy: the Role of Nucleation and Nucleus Growth

Enhanced Rollability of Mg-3al-1zn Alloy by Pulsed Electric Current: A Comparative Study

Improved Plasticity of Mg–Al–Zn Alloy by Electropulsing Tension

Mechanical Properties of Mg-6Gd-1Y-0.5Zr Alloy Processed by Low Temperature Thermo-Mechanical Treatment

Mechanical Properties and Microstructure Evolution of Mg-Gd Alloy During Aging Treatment

Improved Ductility of Aged Mg-9Al-1Zn Alloy Strip by Electropulsing Treatment