Abstract:Dopant-free carrier-selective contacts (CSCs) are considerably attractive on highly efficient crystalline silicon (c-Si) based heterojunction solar cells (HSCs) owing to their combined advantages of low thermal budget, ease of processing and simplicity of the device architecture. However, due to inferior passivation property and relatively high resistivity, the silicon oxide (SiOx) thin film is always ruled out as a viable interfacial layer in a CSC. Here, we demonstrate that the functionalization of nanoscale SiOx films with low work-function metals (WFMs) can simultaneously achieve moderate-level passivation and low contact resistivity on lightly doped n-type c-Si. Simulation results on the CSC comprising SiOx/low-WFM reveal that the tunnel SiOx layer alleviates Fermi-level pinning, and the low WFM helps to reduce the effective barrier height and contact resistivity. This kind of bi-functional electron-selective design possesses high tolerance to the surface state density on the c-Si surface as well as the SiOx layer thickness, as experimentally confirmed by the SiOx/Mg stack achieving an implied open-circuit voltage of 661 mV and a contact resistivity of 35.2 mΩ·cm2 for a SiOx film thickness up to 1.7 nm. A comprehensive assessment suggests that this kind of rear electron transport layer (ETL) enables a theoretical power conversion efficiency (PCE) up to 27.4% if assuming an ideal front junction. Ultimately, a fully dopant-free c-Si HSC featuring a SiOx/low-WFM electron-selective contact and a MoOx hole-selective contact was proposed, yielding a PCE of 21.8%. The relatively high performance and facile integration with c-Si substrates enabled by the SiOx/low-WFM contact may open up new possibilities in designing and fabricating low-cost dopant-free SCs toward high efficiencies competitive with conventionally diffused pn junction SCs.

High-performance hole-selective V2OX/SiOX/NiOX contact for crystalline silicon solar cells

High‐performance hole‐selective <scp> V <sub>2</sub> O <sub>X</sub> </scp> / <scp> SiO <sub>X</sub> </scp> / <scp> NiO <sub>X</sub> </scp> contact for crystalline silicon solar cells

Hole Selective WOx and V2Ox Contacts Using Solution Process for Silicon Solar Cells Application

Improved V 2 O X Passivating Contact for p ‐Type Crystalline Silicon Solar Cells by Oxygen Vacancy Modulation with a SiO X Tunnel Layer

Atomic Layer Deposition of Vanadium Oxide as Hole‐Selective Contact for Crystalline Silicon Solar Cells

A novel silver-doped nickel oxide hole-selective contact for crystalline silicon heterojunction solar cells

Solution-processed vanadium oxide by low-temperature annealing for silicon solar cells with hole selective contact

Electron‐Selective Strontium Oxide Contact for Crystalline Silicon Solar Cells with High Fill Factor

Novel interlayer boosting the performance of evaporated Cu2O hole‐selective contacts in Si solar cells

Sn‐doped Nb2O5 films as effective hole‐selective passivating contacts for crystalline silicon solar cells

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Full-Area i-a-Si:H/ATO/Mg Electron-Selective Contacts for Silicon Solar Cells

A Strategy to Optimize Nickel Oxide/Crystalline Silicon Heterocontact of HJT Solar Cells

Chromium Trioxide Hole-Selective Heterocontacts for Silicon Solar Cells

Enhancement of NiOx/poly‐Si Contact Performance by Insertion of an Ultrathin Metallic Ni Interlayer

The Bifunctional Tin-Doped Indium Oxide As Hole-Selective Contact and Collector in Silicon Heterojunction Solar Cell with A Stable Intermediate Oxide Layer

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Atomic Layer Deposited Al1-xNixO: Low Contact Resistivity Hole-Selective Contact for Crystalline Silicon Solar Cells

Stable Molybdenum Nitride Contact for Efficient Silicon Solar Cells

Sub‐Stochiometric Nickel Oxide Hole‐Selective Contacts in Solar Cells: Comparison of Simulations and Experiments with Sputtered Films

21.3%-Efficient N-Type Silicon Solar Cell with a Full Area Rear TiOx/LiF/Al Electron-Selective Contact