Abstract:NiO alloyed with aluminum, Ni1-x Al x O, is analyzed in terms of its stoichiometry, electronic and transport properties, as well as interfacial band alignment with Si to evaluate its potential use as a hole transport layer (HTL) in p-i-n type solar cells. The analysis is based on component material and slab structural simulations, as well as simulated and measured angle-resolved valence-band photoemission spectroscopy (PES) data, in order to reveal the best suitable stoichiometry. It is concluded that the ionization energy from the highest occupied states tends to increase with Al content as the simulated work function grows from 4.1 eV for pure NiO to 4.7 eV for heavily alloyed Al0.50Ni0.50O. The electronic structure as a function of the interface design between crystalline silicon and the transport layer is used to assess the band lineup and its correlation with the discontinuity of the affinities. The affinity rule is tested by evaluating the workfunctions of the component layers and justified best for a particular Ni-enriched interface design. Technology Computer-Aided Design (TCAD) device simulations show, that the band offset between oxide and crystalline silicon remains within the range of values to sustain a staggering alignment - a condition suitable for effective charge separation, similar to a situation in a tunneling diode. The self-energy of the hole carriers is estimated by contrasting simulated and measured photoemission data, which in the case of non-annealed Al-rich samples is shown to be an order of magnitude higher due to the disorder effects. The work functions derived from the measured PES data for the epitaxially grown oxide films with nearly identical alloy stoichiometry correlate well with the simulated values. The findings suggest that the optimal HTL is formed by starting with a pure Ni layer, followed by a graded doping Al x Ni1-x O, with x high at contact/oxide interface and low at the oxide/semiconductor.

A novel silver-doped nickel oxide hole-selective contact for crystalline silicon heterojunction solar cells

A Strategy to Optimize Nickel Oxide/Crystalline Silicon Heterocontact of HJT Solar Cells

Atomic Layer Deposited Al1-xNixO: Low Contact Resistivity Hole-Selective Contact for Crystalline Silicon Solar Cells

Sn‐doped Nb2O5 films as effective hole‐selective passivating contacts for crystalline silicon solar cells

Sub‐Stochiometric Nickel Oxide Hole‐Selective Contacts in Solar Cells: Comparison of Simulations and Experiments with Sputtered Films

High-performance hole-selective V2OX/SiOX/NiOX contact for crystalline silicon solar cells

Enhancement of NiOx/poly‐Si Contact Performance by Insertion of an Ultrathin Metallic Ni Interlayer

The Bifunctional Tin-Doped Indium Oxide As Hole-Selective Contact and Collector in Silicon Heterojunction Solar Cell with A Stable Intermediate Oxide Layer

Chromium Trioxide Hole-Selective Heterocontacts for Silicon Solar Cells

Simulation of p-type c-Si solar cells with metal oxides as carrier-selective contacts

A Novel Dual Functional Gradient Zn(O,S)/Mg Electron-Selective Contact for Dopant‐Free Silicon Solar Cells with Efficiencies Approaching 21%

Optimized Ni1- x Al x O hole transport layer for silicon solar cells

Gradient doped nickel oxide hole selective heterocontact and ultrathin passivation for silicon photovoltaics with efficiencies beyond 20%

Enhancement of NiO/Si solar cell by adding porous silicon and a silicon dioxide SiO 2 carrier selective layer

The use of nickel oxide as a hole transport material in perovskite solar cell configuration: Achieving a high performance and stable device

Stable Molybdenum Nitride Contact for Efficient Silicon Solar Cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Recrystallizing Sputtered NiOx for Improved Hole Extraction in Perovskite/Silicon Tandem Solar Cells

Symmetric Dopant‐Free Si Solar Cells Enabled by TiOx Nanolayers: An In‐Depth Study on Bipolar Carrier Selectivity

Efficient carrier transport via dual-function interfacial engineering using cesium iodide for high-performance perovskite solar cells based on NiOx hole transporting materials

Tuning Surface Oxidation States of Nickel Oxide for Efficient Inverted Perovskite Solar Cells