Abstract:Soft magnetic Co-based bulk metallic glasses (BMGs) with large supercooled liquid region (ΔTx) and high saturation magnetic flux density (Bs) have been developed in a new Co–Fe–Y–B alloy system. Addition of appropriate contents of Y and Fe into a Co75B25 alloy enlarges the ΔTx and improves the glass-forming ability (GFA). ΔTx of 50–64 K and a critical diameter of up to 2.0 mm have been achieved for the (Co0.5–0.7Fe0.3–0.5)71.5Y3.5B25 BMGs. The coercivity (Hc) of Co75-xYxB25 and (Co0.7Fe0.3)75-xYxB25 (x = 0–5) alloy series shows a similar V-shape change with Y content, and gets the minimum at x = 3.5, while that of (Co1-yFey)71.5Y3.5B25 (y = 0–0.5) alloys keeps rising with the increase of Fe content. The Bs of the alloys monotonically decreases with more Y addition and increases with enriching of Fe. The (Co0.5–0.7Fe0.3–0.5)71.5Y3.5B25 BMGs exhibit high Bs of 1.00–1.17 T and low Hc of 5.4–6.4 A/m. The BMGs possess high yield strength of 3978–4152 MPa with distinct plastic strain of up to 0.9% and Vickers hardness of 1218–1233 as well. The possible mechanisms of Y and Fe affecting the GFA, thermal stability, and magnetic properties of the Co-based Co–Fe–Y–B metallic glasses have been discussed.

A new strategy to fabricate YIG ferrite joint with novel magnetic Bi<sub>2</sub>O<sub>3</sub>-CoO-Fe<sub>2</sub>O<sub>3</sub>-B<sub>2</sub >O<sub>3</sub> glass

Microstructure and Properties of YIG/YIG Magnetic Homogenization Joint Fabricated by a Novel Bi2O3-B2O3-NiO-Fe2O3 Magnetic Glass

Evolutionary Mechanism of YBO3 Whisker and Its Effect on the Properties of YIG Ferrite Joint Brazed by Bi2O3–B2O3–SiO2–ZnO Glass

Microstructure and Properties of YIG Ferrite Joint Brazed by Fe2O3-doped Bismuth Composite Glass

Microstructure Evolution and Properties of Dissimilar YIG/MTC Joint Fabricated with Bismuth-Based Glass Ceramic

Microstructure and properties of YIG/bismuth-based composite glass/YIG joints with growth of in situ MgFe2O4 whiskers

A New Design of the YIG/MTC Joint Brazed by Bismuth-Based Glass

Microstructure and performance characterization of in-situ Co2FeO4 whiskers reinforced YIG/YIG joints

Mixed rare-earth iron garnet AYbBiIG single-crystals for high-performance optical isolation

Novel design of YIG/MTC heterogeneous joint bonded by glass ceramic after amorphous glass cladding

Microstructure Evolution of Magnetic Glass-ceramic Brazed Lithium Ferrite Joint and Simulation of Magnetic Properties

Microstructure evolution and mechanical properties of YAG/YAG joint using bismuth-borate glass

Research of preparing Bi substituted yttrium iron garnet and epoxy magneto-optical hybridized films

Polycrystalline Bi Substituted YIG Ferrite Processed Via Low Temperature Sintering

0.7Bifeo(3)-0.3Batio(3)-y3fe5o12 Composites with Simultaneously Improved Electrical and Magnetic Properties

In-situ synthesis of novel Co<sub>2</sub>FeO<sub>4</sub> needle-like phases for structural and functional integration

Low Temperature Sintering of Y3Fe5O12with Glass Addition

Roles of Y and Fe contents on glass-forming ability, thermal stability, and magnetic properties of Co-based Co–Fe–Y–B bulk metallic glasses

High Dielectric Constant and Magnetic Properties of Bi-In Co-substituted YIG Ferrites

Wetting Behavior and Bonding Characteristics of Bismuth-Based Glass Brazes Used to Join Li-Ti Ferrite Systems

Bi–Li–P Co-Substituted YIG Microwave Ferrites: Sintering Characteristics and Gyromagnetic Properties