Abstract:In this paper, the stability of the nanorod-structured La0.8Sr0.2Co0.2Fe0.8O3−δ (LSCF)–Gd0.2Ce0.8O1.9 (GDC) composites prepared with combined methods of electrospinning and infiltration has been investigated. For comparison, conventional nanoparticle-structured LSCF–GDC composite cathodes were also developed. Electrochemical impedance spectra of these LSCF–GDC composite cathodes at open circuit potentials were measured using an electrolyte-supported LSCF–GDC/GDC/LSCF–GDC symmetric cell configuration for stability evaluation. The results show that the conventional LSCF–GDC composite cathode has poor stability, with its polarization resistance increasing from 0.80 to 1.37Ωcm2 after being polarized under a current density of 100mAcm−2 for 120h at 650°C. This degradation is attributed to the agglomeration of cathode materials and to poor contact between the cathode and the electrolyte. In contrast, the nanorod-structured LSCF–GDC composite cathode exhibits an excellent performance stability, since its polarization resistance decreases from 0.097 to 0.077Ωcm2 after polarization for 144h under a current density as high as 300mAcm−2. In addition, a nearly constant polarization resistance is maintained during a 20-cycle thermo-cyclic test. The outstanding stability of the nanorod-structured LSCF–GDC composite cathode is ascribed to the stability of its microstructure with continuous electronic and ionic conduction pathways and high porosity, this microstructure is realized through the suppression of LSCF agglomeration by the compact GDC layers. These results demonstrate that the nanorod-structured LSCF–GDC composite is a reliable material for use as intermediate temperature solid oxide fuel cell cathode with a high performance.

Tailoring High-Temperature Stability and Electrical Conductivity of High Entropy Lanthanum Manganite for Solid Oxide Fuel Cell Cathodes

Tailoring a LaMnO 3 cathode for proton-conducting solid oxide fuel cells: integration of high performance and excellent stability

A Study of (pr, Nd, Sm)1−xSrxMnO3 Cathode Materials for Solid Oxide Fuel Cell

Performance and optimization of perovskite-type La1·4Ca0·6CoMnO5+δ cathode for intermediate-temperature solid oxide fuel cells

A novel facile strategy to suppress Sr segregation for high-entropy stabilized La0·8Sr0·2MnO3-δ cathode

Stability of Ce0.8Sm0.2O2 Electrolyte and Mn1.5CO1.5O4 for Solid Oxide Fuel Cells

A Fundamental Study on the Chemical Stability of La1-xSrxCo0.2Fe0.8O3-delta Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Improvement of La0.8Sr0.2MnO3-δ Cathode Material for Solid Oxide Fuel Cells by Addition of YFe0.5Co0.5O3

Synthesis and properties of strontium-doped yttrium manganite

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Mn-Stabilised Microstructure and Performance of Pd-impregnated YSZ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Sm0.5Sr0.5MnO3 As a Potential Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

High Thermal Stability of Three-Dimensionally Ordered Nano-Composite Cathodes for Solid Oxide Fuel Cells

Enhanced Electrochemical Performance and Operating Stability of La0.8Sr0.2Co0.2Fe0.8O3-δ Fiber Cathode Via Gd0.2Ce0.8O1.9-δ Coating for Intermediate Temperature Solid Oxide Fuel Cells

Long-term Stability of Infiltrated La0.8Sr0.2CoO3−, La0.58Sr0.4Co0.2Fe0.8O3− and SmBa0.5Sr0.5Co2.0O5+ Cathodes for Low Temperature Solid Oxide Fuel Cells

Investigation of Nd2Ni0.9M0.1O4+δ (M = Ni, Co, Cu, Fe, and Mn) Cathodes for Intermediate-Temperature Solid Oxide Fuel Cell

Stability of nanorod-structured La 0.8 Sr 0.2 Co 0.2 Fe 0.8 O 3−δ –Gd 0.2 Ce 0.8 O 1.9 composite cathodes for intermediate temperature solid oxide fuel cells

Stability Investigation for Symmetric Solid Oxide Fuel Cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δElectrode

Thermochemical Compatibility and Polarization Behaviors of La0.8Sr0.2Co0.8Ni0.2O3−δ As a Cathode Material for Solid Oxide Fuel Cell

Study on the Cathodes Material La 1- X Sr X MnO 3 for SOFC

Electrical conductivity and performance of doped LaCrO3 perovskite oxides for solid oxide fuel cells