Abstract:Yttria-stabilized bismuth oxides (YSB) are cooperated to (La,Sr)MnO3 (LSM) to form composite cathodes for intermediate-temperature solid oxide fuel cells. The composite electrodes are fabricated with screen-printing technique and characterized using electrochemical impedance spectroscopy. The interfacial polarization resistances (Rp) of the LSM–YSB electrodes on yttria-stabilized zirconia (YSZ), samaria-doped ceria (SDC), and YSB electrolytes are analyzed regarding the electrode composition and operating temperature. Rp decreases with the increase of YSB content up to 80 wt.% in the LSM–YSB composite. When YSZ is used as the electrolyte, the lowest Rp is 0.14Ωcm2 at 700°C, which is only 1.8% of that for a pure LSM electrode, 5.6% of that reported for LSM–YSZ composites, and 13.2% of that for reported LSM–GDC (gadolinia-doped ceria) electrodes, demonstrating that YSB is very effective to enhance the performance of LSM-based cathodes. The electrode performance is also affected by the electrolyte substrate. LSM electrodes without any YSB exhibit obviously different performance on YSZ, SDC and YSB electrolytes. However, when YSB is cooperated, Rp on different electrolytes tends to become equivalent, especially for electrodes with high YSB content. Further analysis shows that their electrochemical performance is contributed dominantly from the electrode bulk whereas the contribution from the electrode/electrolyte interface is negligible, suggesting weak electrolyte effect on the performance of LSM–YSB composite electrodes.

Sm0.5Sr0.5MnO3 As a Potential Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Bi0.5Sr0.5MnO3 As Cathode Material for Intermediate-Temperature Solid Oxide Fuel Cells

Composition optimization of samarium strontium manganite-yttria stabilized zirconia cathode for high performance intermediate temperature solid oxide fuel cells

The Performance of La 0.6 Sr 1.4 MnO 4 Layered Perovskite Electrode Material for Intermediate Temperature Symmetrical Solid Oxide Fuel Cells

Theoretical Study on SmxSr1−xMnO3 As a Potential Solid Oxide Fuel Cell Cathode

Strontium-doped samarium manganite as cathode materials for oxygen reduction reaction in solid oxide fuel cells

(La,sr)mno3–(y,bi)2o3 Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Improvement of La0.8Sr0.2MnO3-δ Cathode Material for Solid Oxide Fuel Cells by Addition of YFe0.5Co0.5O3

Bismuth Oxide-Coated (la,sr)mno3 Cathodes for Intermediate Temperature Solid Oxide Fuel Cells with Yttria-Stabilized Zirconia Electrolytes

PdO/ZrO2 engineered (La0.8Sr0.2)0.95MnO3-δ-(Y2O3)0.08(ZrO2)0.92 cathode for use in intermediate temperature solid oxide fuel cells

Development of Lsm-Based Cathodes for Solid Oxide Fuel Cells Based on Ysz Films

La[sub 0.85]sr[sub 0.15]mno[sub 3−δ] Infiltrated Y[sub 0.5]bi[sub 1.5]o[sub 3] Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Intermediate temperature solid oxide fuel cell composite cathodes consisting of nanostructured LSM and SDC particles

High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes

Nanoscale Bismuth Oxide Impregnated (la,sr)mno3 Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Nano-structured (La, Sr)(Co, Fe)O3 + YSZ composite cathodes for intermediate temperature solid oxide fuel cells

Mn-Stabilised Microstructure and Performance of Pd-impregnated YSZ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Optimization of strontium molybdate based composite anode for solid oxide fuel cells

Fabrication of LSM-SDC Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Low-temperature solid oxide fuel cells with La1-xSrxMnO3 as the cathodes

Optimisation and Evaluation of La0.6Sr0.4CoO3 – Δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells