The Performance of La 0.6 Sr 1.4 MnO 4 Layered Perovskite Electrode Material for Intermediate Temperature Symmetrical Solid Oxide Fuel Cells

Jun Zhou,Gang Chen,Kai Wu,Yonghong Cheng

DOI: https://doi.org/10.1016/j.jpowsour.2014.06.163

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:A layered perovskite electrode material, La0.6Sr1.4MnO4+δ (LSMO4), has been studied for intermediate temperature symmetrical solid oxide fuel cells (IT-SSOFCs) on La0.9Sr0.1Ga0.8Mg0.2O3−δ (LSGM) electrolyte. The chemical compatibility tests indicate that no reaction occurred between LSMO4 oxide and LSGM electrolyte at temperature up to 1000 °C both in air and 5% H2. The lower conductivity in 5% H2 and higher conduction activation energy than those in air would be caused by poorer overlap of both σ and π bonds. DFT + U calculations also show that oxygen vacancies which formed in reducing atmosphere may block the 3D hopping path for electrons or holes through Mn–O–Mn chains. For LSMO4 electrode, SEM results indicate that the electrode formed good contact with the electrolyte after being sintered at 900 °C for 2 h. At 800 °C, the polarization resistance of the LSMO4 cathode is about 0.87 Ω cm2 in air, while the polarization resistance of the LSMO4 anode is about 2.07 Ω cm2 in 5% H2. LSMO4 exhibits better electrochemical activity for oxygen reduction than that for hydrogen oxidation. A cell with LSGM electrolyte, LSMO4–LSGM mixture as anode and cathode simultaneously displays a maximum power density of 59 mW cm−2 at 800 °C.