Evaluation of La x Sr 2−x FeO 4 layered perovskite as potential electrode materials for symmetrical solid oxide fuel cells

jun zhou,yu chen,gang chen,kai wu,yonghong cheng
DOI: https://doi.org/10.1016/j.jallcom.2015.05.261
IF: 6.2
2015-01-01
Journal of Alloys and Compounds
Abstract:This paper presents layered perovskite LaxSr2-xFeO4 electrodes with La0.9Sr0.1Ga0.8Mg0.2O3-delta (LSGM) electrolyte for symmetrical solid oxide fuel cells. XRD and TGA results reveal a good stability of La0.8Sr1.2FeO4 electrode in reducing atmosphere. An excellent chemical compatibility in air and 5% H-2/Ar was found between La0.8Sr1.2FeO4 electrode and LSGM electrolyte. In air, the maximum conductivity of these materials occurred as x = 0.6, however, La0.8Sr1.2FeO4 sample has the highest conductivity in 5% H-2/Ar. The electrochemical properties were evaluated by impedance spectroscopy and currentevoltage curves. At 800 degrees C, the polarization resistance of the La0.8Sr1.2FeO4 cathode is about 1.85 Omega cm(2) in air, while the polarization resistance of the La0.8Sr1.2FeO4 anode is about 5.82 Omega cm(2) under 5% H-2/Ar. A single cell (1.0 cm(2) active area) was fabricated with 70wt% La0.8Sr1.2FeO4+30wt% LSGM as both cathode and anode, LSGM (1.1 mm thickness) as electrolyte. At 800 degrees C, the maximum power density was 73 mW cm(-2) under humidified H-2 as fuel. (C) 2015 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?