Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Stability Investigation for Symmetric Solid Oxide Fuel Cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δElectrode

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Performance Evaluation of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ As Both Anode and Cathode Material in Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Thermochemical Compatibility and Polarization Behaviors of La0.8Sr0.2Co0.8Ni0.2O3−δ As a Cathode Material for Solid Oxide Fuel Cell

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Development of La0.6Sr0.4Co0.2Fe0.8O3−δ Cathode with an Improved Stability Via La0.8Sr0.2MnO3-film Impregnation

B-Site Sc Doping of La0.6Ca0.4Fe0.8Ni0.2O3- D As an Electrode for Solid Oxide Cells

Investigation on a Novel Composite Solid Oxide Fuel Cell Anode with La0.6Sr0.4Co0.2Fe0.8O3−δ Derived Phases

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Stability and Electrochemical Performance of Lanthanum Ferrite-Based Composite Sofc Anodes in Hydrogen and Carbon Monoxide

Electrochemical Stability of La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated YSZ Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Stability Study on a Novel Micro Structure Configuration of Cathode Contact Layer for Solid Oxide Fuel Cell Stack

Performance Stability and Degradation Mechanism of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ Cathodes under Solid Oxide Fuel Cells Operation Conditions

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Electrochemical Performance and Stability of Lanthanum Strontium Cobalt Ferrite Oxygen Electrode with Gadolinia Doped Ceria Barrier Layer for Reversible Solid Oxide Fuel Cell

Thermodynamic Stability Assessment of MIEC Cathode Materials for Solid Oxide Fuel Cells

Long-term Stability of Infiltrated La0.8Sr0.2CoO3−, La0.58Sr0.4Co0.2Fe0.8O3− and SmBa0.5Sr0.5Co2.0O5+ Cathodes for Low Temperature Solid Oxide Fuel Cells

Synthesis and Evaluation of Ca-doped Sr2Fe1.5Mo0.5O6-δ As Symmetrical Electrodes for High Performance Solid Oxide Fuel Cells

Sc-substituted La0.6Sr0.4FeO3−δ Mixed Conducting Oxides As Promising Electrodes for Symmetrical Solid Oxide Fuel Cells