Abstract:In this work, a mechanochemical process using high-energy milling conditions was employed to synthesize La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) powders from the corresponding stoichiometric amounts of La2O3, SrO, Ga2O3, and MgO in a short time. After 60 min of milling, the desired final product was obtained without the need for any subsequent annealing treatment. A half solid oxide fuel cell (SOFC) was then developed using LSGM as an electrolyte and La0.8Sr0.2MnO3 (LSM) as an electrode, both obtained by mechanochemistry. The characterization by X-ray diffraction of as-prepared powders showed that LSGM and LSM present a perovskite structure and pseudo-cubic symmetry. The thermal and chemical stability between the electrolyte (LSGM) and the electrode (LSM) were analyzed by dynamic X-ray diffraction as a function of temperature. The electrolyte (LSGM) is thermally stable up to 800 and from 900 °C, where the secondary phases of LaSrGa3O7 and LaSrGaO4 appear. The best sintering temperature for the electrolyte is 1400 °C, since at this temperature, LaSrGaO4 disappears and the percentage of LaSrGa3O7 is minimized. The electrolyte is chemically compatible with the electrode up to 800 °C. The powder sample of the electrolyte (LSGM) at 1400 °C observed by HRTEM indicates that the cubic symmetry Pm-3m is preserved. The SOFC was constructed using the brush-painting technique; the electrode–electrolyte interface characterized by SEM presented good adhesion at 800 °C. The electrical properties of the electrolyte and the half-cell were analyzed by complex impedance spectroscopy. It was found that LSGM is a good candidate to be used as an electrolyte in SOFC, with an Ea value of 0.9 eV, and the LSM sample is a good candidate to be used as cathode.

La0.7Sr0.3Fe0.7Ga0.3O3-delta as electrode material for a symmetrical solid oxide fuel cell

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Performance Evaluation of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ As Both Anode and Cathode Material in Solid Oxide Fuel Cells

Double perovskite Sr2FeMo0.6Mg0.25Ga0.15O6−δ as high-performance fuel electrode for reversible solid oxide cell

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Stability Investigation for Symmetric Solid Oxide Fuel Cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δElectrode

Cerium and ruthenium co-doped La0.7Sr0.3FeO3– as a high-efficiency electrode for symmetrical solid oxide fuel cell

APPLICATION OF LaGaO3-BASED OXYGEN-ION CONDUCTOR IN SOLID OXIDE FUEL CELL

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Electrochemical performance and structural durability of Mg-doped SmBaMn2O5+δ layered perovskite electrode for symmetrical solid oxide fuel cell

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Layered Oxygen-Deficient Double Perovskite GdBaFe2O5+δ As Electrode Material for Symmetrical Solid-Oxide Fuel Cells

Gadolinium-doped SrFeO 3 As a Highly Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

Oxygen vacancies-rich iron-based perovskite-like electrodes for symmetrical solid oxide fuel cells

Development by Mechanochemistry of La0.8Sr0.2Ga0.8Mg0.2O2.8 Electrolyte for SOFCs

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

Sr2comoo6 Anode for Solid Oxide Fuel Cell Running on H-2 and Ch4 Fuels

High performance and stability of PrBa0.5Sr0.5Fe2O5+δ symmetrical electrode for intermediate temperature solid oxide fuel cells