Abstract:A K2NiF4-type layer-structured oxide, La0.6Sr1.4MnO4+delta (LSMO4), is tuned into a potential electrode for intermediate-temperature symmetrical solid oxide fuel cells (IT-SSOFCs) through surface modification. Bulk-phase LSMO4 shows high chemical stability under both oxidizing and reducing atmospheres and good thermo-mechanical compatibility with the Sm0.2Ce0.8O1.9 (SDC) electrolyte; however, it exhibits insufficient electro-catalytic activity for both the oxygen reduction reaction (ORR) and oxidation of fuels. Surface modification through infiltration is applied to improve the electro-catalytic activity of the LSMO4-based electrode; both SDC and NiO are explored. The co-modification of the LSMO4 electrode with SDC and NiO is found to provide the best performance. In particular, LSMO4-SDC-NiO shows the highest cathodic performance with an area specific resistance (ASR) of only 0.17 U cm(2) at 700 degrees C. Under optimized conditions, a maximum power density of 614 mW cm(-2) at 800 degrees C is achieved for an electrolyte-supported symmetrical SOFC with surface modified LSMO4-based electrodes operating with hydrogen, and a 378 mW cm(-2) maximum power output is still achieved at 800 degrees C when methane is applied as the fuel. The symmetrical cell also shows good operational stability with both hydrogen and methane fuels. Through proper surface modification based on the infiltration method, the results demonstrate that LSMO4 can be developed into favorable electrodes for IT-SSOFCs, which are capable of operating with both hydrogen and hydrocarbon fuels.

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Evaluation and Performance Optimization of Double-Perovskite LaSrCoTiO5+δ Cathode for Intermediate-Temperature Solid-Oxide Fuel Cells

Cobalt-free Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3−δ As a Bi-Functional Electrode Material for Solid Oxide Fuel Cells

Nb-doped La0.6Sr0.4FeO3−δ as an electrolyte for intermediate-temperature solid oxide fuel cells

Preparation of SOFC Anodes at Lower Temperature with Boosted Electrochemical Performance

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Sulfur-tolerant Fe-doped La0·3Sr0·7TiO3 perovskite as anode of direct carbon solid oxide fuel cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Performance Evaluation of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ As Both Anode and Cathode Material in Solid Oxide Fuel Cells

Enhanced oxygen reduction reaction activity and electrochemical performance of A-site deficient (La0.6Sr0.4)1-xFe0.8Ni0.2O3−δ cathode for solid oxide fuel cells

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

SrCo0.8Ti0.1Ta0.1O3-δ Perovskite: A New Highly Active and Durable Cathode Material for Intermediate-Temperature Solid Oxide Fuel Cells

Electrochemical properties of La1.5Pr0.5Ni0.95−Cu Al0.05O4+ Ruddlesden-Popper phase as cathodes for intermediate-temperature solid oxide fuel cells

A Regenerative Coking and Sulfur Resistant Composite Anode with Cu Exsolution for Intermediate Temperature Solid Oxide Fuel Cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Fabrication and Performance of La, Co-Substituted SrTiO3 As Cathode Materials of Solid Oxide Fuel Cell

Novel SrTixCo1−xO3−δ Cathodes for Low-Temperature Solid Oxide Fuel Cells