Abstract:Reducing fabrication costs and increasing system performance are the primary objectives of contemporary SOFC developments and research. One of the efficient ways to address the design and durability difficulties is to lower the operating temperatures to the intermediate range (IT, 500–800 °C). La 0.595 V 0.005 Sr 0.4 CoO 3−∂ (LV05SC) perovskite cathode is investigated as a novel cathode for intermediate temperature solid oxide fuel cells (IT-SOFC). Anode-supported YSZ ((Y 2 O 3 ) 0.08 (ZrO 2 ) 0.92 ) and GDC (Gd 0.1 Ce 0.9 O 1.95 ) electrolytes were prepared by a multilayer tape casting and co-firing method. The green bi-layer tapes were co-fired at various temperatures with optimized electrolyte and anode slurries. X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were used to analyze the microstructures and the phase characterizations of the cathode material and single cell. At 1250 °C of the co-firing temperature, as-prepared anode-supported cells showed no defects and excellent microstructural properties such as no gas permeability, porosity, and sintered structure. The electrolytes with a thickness of almost 20 μm were fairly dense. The power densities were evaluated and both anode-supported electrolytes showed good electrochemical performance at intermediate temperatures. The peak power density of the cell reached 89 mW/cm 2 , and the total resistance was only 3.05 Ω.cm 2 under open circuit conditions at 800 °C. The diffusion processes of oxide ions (O 2− ) were found to be the limiting step for ORR by the EIS analysis. These findings suggest that the compound is a promising cathode material for IT-SOFCs.

Preparation of SOFC Anodes at Lower Temperature with Boosted Electrochemical Performance

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

Enhanced Performance of Solid Oxide Fuel Cells with Ni/CeO2 Modified La0.75Sr0.25Cr0.5Mn0.5O3− Anodes

Effect of Anode Calcination on the Performance and Redox Stability of Low-Temperature Solid Oxide Fuel Cells Prepared Via Impregnation

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

Efficient and Stable Iron Based Perovskite La0.9Ca0.1Fe0.9Nb0.1O3-δ Anode Material for Solid Oxide Fuel Cells

Fabrication and Performance of Solid Oxide Fuel Cells with La0.2Sr0.7TiO3–δ As Anode Support and La2NiO4+δ As Cathode

Influence of the La0.2Sr0.7Ti0.95Ni0.05O3 (LSTN) Synthesis Method on SOFC Anode Performance

Vacuum Cold Sprayed Nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ As a High-Performance Cathode for Porous Metal-Supported Solid Oxide Fuel Cells Operating below 600 °C

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

A Highly Efficient and Robust Perovskite Anode with Iron-Palladium Co-exsolutions for Intermediate-Temperature Solid-Oxide Fuel Cells

A Novel High Performance Composite Anode with in Situ Growth of Fe-Ni Alloy Nanoparticles for Intermediate Solid Oxide Fuel Cells

Applying multifunctional perovskite LaNiO3 as electrolyte and anode for low‐temperature solid oxide fuel cell

Sulfur-tolerant Fe-doped La0·3Sr0·7TiO3 perovskite as anode of direct carbon solid oxide fuel cells

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Fabrication and performance analysis of A-site metal-promoted La0.595V0.005Sr0.4CoO3−∂ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

Nickel-substituted Ba0.5Sr0.5Co0.8Fe0.2O3-: a Highly Active Perovskite Oxygen Electrode for Reduced-Temperature Solid Oxide Fuel Cells

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

ZnO/NiO Nanocomposite Electrodes for Low-Temperature Solid Oxide Fuel Cells