Abstract:A K2NiF4-type layer-structured oxide, La0.6Sr1.4MnO4+delta (LSMO4), is tuned into a potential electrode for intermediate-temperature symmetrical solid oxide fuel cells (IT-SSOFCs) through surface modification. Bulk-phase LSMO4 shows high chemical stability under both oxidizing and reducing atmospheres and good thermo-mechanical compatibility with the Sm0.2Ce0.8O1.9 (SDC) electrolyte; however, it exhibits insufficient electro-catalytic activity for both the oxygen reduction reaction (ORR) and oxidation of fuels. Surface modification through infiltration is applied to improve the electro-catalytic activity of the LSMO4-based electrode; both SDC and NiO are explored. The co-modification of the LSMO4 electrode with SDC and NiO is found to provide the best performance. In particular, LSMO4-SDC-NiO shows the highest cathodic performance with an area specific resistance (ASR) of only 0.17 U cm(2) at 700 degrees C. Under optimized conditions, a maximum power density of 614 mW cm(-2) at 800 degrees C is achieved for an electrolyte-supported symmetrical SOFC with surface modified LSMO4-based electrodes operating with hydrogen, and a 378 mW cm(-2) maximum power output is still achieved at 800 degrees C when methane is applied as the fuel. The symmetrical cell also shows good operational stability with both hydrogen and methane fuels. Through proper surface modification based on the infiltration method, the results demonstrate that LSMO4 can be developed into favorable electrodes for IT-SSOFCs, which are capable of operating with both hydrogen and hydrocarbon fuels.

La0.6Sr1.4MnO4 Layered Perovskite Anode Material for Intermediate Temperature Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

The Performance of La 0.6 Sr 1.4 MnO 4 Layered Perovskite Electrode Material for Intermediate Temperature Symmetrical Solid Oxide Fuel Cells

High Performance Ferrite–based Anode La0.5Sr0.5Fe0.9Mo0.1O3–δ for Intermediate–temperature Solid Oxide Fuel Cell

Sulfur Tolerant Redox Stable Layered Perovskite SrLaFeO4 − Δ As Anode for Solid Oxide Fuel Cells

Evaluation of La x Sr 2−x FeO 4 layered perovskite as potential electrode materials for symmetrical solid oxide fuel cells

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

La0.8Sr1.2CoO4+δ–CGO Composite As Cathode on La0.9Sr0.1Ga0.8Mg0.2O3−δ Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Performance of the single-chamber solid oxide fuel cell with a La 0.75 Sr0.25 Cr0.5 Mn0.5 O 3-δ -based perovskite anode

Preparation and Performance of Anode-supported LaGaO<SUB>3</SUB>-based Electrolyte Solid Oxide Fuel Cells with Sm-doped CeO<SUB>2</SUB> Buffer Layers

Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode

Ba0.9Co0.7Fe0.2Nb0.1O3−δ As Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

La 3+-Substituted Sr2Fe1.5Ni0.1Mo0.4O6-δ As Anodes for Solid Oxide Fuel Cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

La0.7Sr0.3Fe0.7Ga0.3O3-delta as electrode material for a symmetrical solid oxide fuel cell

A medium-entropy perovskite oxide La0.7Sr0.3Co0.25Fe0.25Ni0.25Mn0.25O3-δ as intermediate temperature solid oxide fuel cells cathode material

Electrochemical performance and structural durability of Mg-doped SmBaMn2O5+δ layered perovskite electrode for symmetrical solid oxide fuel cell

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte