Abstract:High strength and high conductivity Cu-based materials are key requirements in high-speed railway and high-field magnet systems. Cu-Fe alloys represent one of the most promising candidates due to the cheapness of Fe compared to Cu-Ag and Cu-Nb alloys. The high strength of Cu-Fe alloys primarily relies on the high density of the Cu/Fe phase interface, which is controlled by the co-deformation of the Cu matrix and Fe phase. In this study, our main attention was focused on the deformation behavior of the Fe phase using different scales. Cu-2.5% Fe-0.2% Cr (in weight) and Cu-6% Fe alloys were cast, annealed, and cold drawn into wires to investigate their microstructure and properties evolution. Cu-6% Fe contains Cu matrix and Fe, which become the primary particles in the micrometer scale after solution treatment. Cu-2.5% Fe-0.2% Cr contains Cu matrix and Fe precipitate particles in a nanometer scale after solution and aging treatment. The Fe primary particles were elongated and evolved into ribbons in a nanometer scale while the Fe precipitate particles were hardly deformed even at a drawing strain of 6. The reason for the unchanging characteristics of Fe precipitate particles is due to the size effect and incoherent phase interface of Cu matrix and Fe precipitate particles. The strength of both Cu-6% Fe and Cu-2.5% Fe-0.2% Cr alloys increases with the increase in the drawing strain. The electrical resistivity of Cu-6% Fe gradually increases and that of Cu-2.5% Fe-0.2% Cr keeps almost constant with the increase in the drawing strain.

Microstructure and Properties of High Strength, High Conductivity and Magnetic Cu–10Fe-0.4Si Alloy

Effect of Co Addition on the Phase Structure and Magnetic Properties of Fe-Si-Al Alloys

Effects of Si addition on mechanical, electrical and magnetic property of Cu-10Fe alloy

Attaining Exceptional Electrical Conductivity in Cu-Fe Composite by Powder Rolling Strategy

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Microstructure evolution and soft magnetic properties of Cu–10Fe alloys

Microstructure and Properties of Cold Drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe Alloys

A study of electromagnetic characteristics of Fe-Si-Al magnetic alloy

Effect of 0.5 Mass% Cu Addition on Ductility and Magnetic Properties of Fe-6.5Si Alloy

Effects of metalloid Si on the microstructure and mechanical properties of Fe36Ni36Cr10Mo1Al17-XSiX alloys

Effect of Si on Fe-rich intermetallic formation and mechanical properties of heattreated Al-Cu-Mn-Fe alloys

Texture Genetics and Magnetic Properties of Fe-6.5%Si Materials Modified with Cu

Microstructure, Texture Evolution And Magnetic Properties Of Fe-6.5 Wt. % Si And Fe-6.5 Wt. % Si-0.5 Wt. % Cu Alloys During Rolling And Annealing Treatment

Microstructure and properties of high strength, high conductivity Cu-2.5Fe-0.3Cr-0.3Mg-0.2Si-0.1Ca-0.1Zr alloy treated by multi-stage thermomechanical treatment

Microstructure and soft magnetic properties of nanocrystalline Fe–Si powders

Excellent Mechanical Properties and High Electrical Conductivity of Cu-Co-Si-Ti Alloy Due to Multiple Strengthening

Effect of Fe and Si on the Phase Composition and Microstructure Evolution in Al-2 wt.% Cu-2 wt.% Mn Alloy During Solidification, Cold Rolling and Annealing

Effect of Mg on microstructure and properties of Cu-Ni-Fe-P alloy with high strength and high conductivity

Microstructure and Properties of High Strength and High Conductivity Cu-0.4Mg Alloy Processed by Upward Continuous Casting and Multi-pass Drawing

The role of Cu content on structure and magnetic properties of Fe–Si–B–P–Cu nanocrystalline alloys

Effect of Co addition on hardness and electrical conductivity of Cu–Si alloys