Abstract:High strength and high conductivity Cu-based materials are key requirements in high-speed railway and high-field magnet systems. Cu-Fe alloys represent one of the most promising candidates due to the cheapness of Fe compared to Cu-Ag and Cu-Nb alloys. The high strength of Cu-Fe alloys primarily relies on the high density of the Cu/Fe phase interface, which is controlled by the co-deformation of the Cu matrix and Fe phase. In this study, our main attention was focused on the deformation behavior of the Fe phase using different scales. Cu-2.5% Fe-0.2% Cr (in weight) and Cu-6% Fe alloys were cast, annealed, and cold drawn into wires to investigate their microstructure and properties evolution. Cu-6% Fe contains Cu matrix and Fe, which become the primary particles in the micrometer scale after solution treatment. Cu-2.5% Fe-0.2% Cr contains Cu matrix and Fe precipitate particles in a nanometer scale after solution and aging treatment. The Fe primary particles were elongated and evolved into ribbons in a nanometer scale while the Fe precipitate particles were hardly deformed even at a drawing strain of 6. The reason for the unchanging characteristics of Fe precipitate particles is due to the size effect and incoherent phase interface of Cu matrix and Fe precipitate particles. The strength of both Cu-6% Fe and Cu-2.5% Fe-0.2% Cr alloys increases with the increase in the drawing strain. The electrical resistivity of Cu-6% Fe gradually increases and that of Cu-2.5% Fe-0.2% Cr keeps almost constant with the increase in the drawing strain.

Microstructure evolution and soft magnetic properties of Cu–10Fe alloys

Microstructure and Properties of Cold Drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe Alloys

Effects of Si addition on mechanical, electrical and magnetic property of Cu-10Fe alloy

Microstructure, Texture Evolution And Magnetic Properties Of Fe-6.5 Wt. % Si And Fe-6.5 Wt. % Si-0.5 Wt. % Cu Alloys During Rolling And Annealing Treatment

Effect of 0.5 Mass% Cu Addition on Ductility and Magnetic Properties of Fe-6.5Si Alloy

Compositional Design and Microstructural Tuning of Fe–Si–Co Soft Magnetic Alloys with Enhanced Performance

Microstructure Evolution, Magnetic Properties and Frequency Characteristics of Si-rich FeSiBCuNb Soft Magnetic Alloy Induced by Annealing Treatment

Microstructure and soft magnetic properties of nanocrystalline Fe–Si powders

The role of Cu content on structure and magnetic properties of Fe–Si–B–P–Cu nanocrystalline alloys

Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design

Influence of static magnetic field on rapid solidified structure and nanocrystallization behavior of Fe-Si-B-Cu soft magnetic alloys with pre-existing α-Fe nanocrystals

Optimization of Crystallization Behavior and Soft Magnetic Properties of the Si-free Fe-B-P-C-Cu Nanocrystalline Alloys by Cu Content Tuning

Soft magnetic properties of Co-doped FeSiBC amorphous and nanocrystalline alloys

Electron Microscopy and Magnetic Properties of Fe-Cr-Co-Si Permanent Magnet Alloys Manufactured by Rolling-Ageing Technique

Enhanced Ms of Fe-rich Fe-B-Cu amorphous/nanocrystalline alloys achieved by annealing treatments

Influence of microstructure and anisotropy on the high-frequency soft magnetic properties of nanocrystalline FeSiBNbCuP alloys

Roles of Cu in Fe-based Soft Magnetic Nanocrystalline Alloys with High Fe Content

Understanding the role of Cu element in nanocrystalline hot deformed Nd-Fe-B magnets

Effect of Cu addition on microstructure, texture and magnetic properties of 6.5 wt% Si electrical steel

Role of Inclusion, Microstructure and Texture Evolution in Soft Magnetic Properties of Fe–6.9 wt%Si Alloy with Yttrium Doping

Microstructure, crystallization behavior, and soft magnetic properties of Co-doped Finemet-type nanocrystalline alloys