Abstract:The corrosion phenomenon and its economic impacts can hardly be ignored in any application. This study synthesized a quaternary ammonium salt (3) containing hydrophobic dodecyl and electron-rich diallylbenzyl amine moieties to be used in 15 % HCl as a corrosion inhibitor of mild steel. Several techniques, such as 1H and 13C NMR, IR, TGA, and elemental analysis, have been used to characterize inhibitor 3. Popular corrosion measurement techniques, namely weight loss, potentiodynamic polarization techniques, and electrochemical impedance spectroscopy, have been used to determine the efficiency of inhibitor 3. At 303 K and a moderately low concentration of 50 ppm, the quaternary ammonium salt-based inhibitor demonstrated a maximum efficiency of ≈95.0 %. At elevated temperatures of 313, 323, and 333 K, the inhibition efficacy values were recorded as 91.3, 82.8, and 75.0 %, respectively. Adsorption isotherm study revealed that the adsorption of inhibitor 3 followed Langmuir adsorption isotherm. The value of Δ G a d s ° was found to be - 40.19 kJ mol-1, indicating that inhibitor 3 became adsorbed via a mixed physi-chemisorption mechanism. A very high adsorption constant ( K a d s ) of 1.53 × 105 L mol-1 suggested strong adsorption of inhibitor 3. The difference in activation energy ( E a ) value of 42.4 kJ mol-1 between the control and the inhibited solution indicated an efficient adsorption of inhibitor 3. The ability of inhibitor 3 to retard both anodic and cathodic half-cell reactions was proved via open circuit potential and Tafel curves studies. Detailed discussions on the change in corrosion current densities ( i c o r r ), polarization ( R p ) and charge transfer ( R c t ) resistances have been offered to discuss the inhibition efficiency. Water contact angle measurement showed a drastic increase in mild steel surface hydrophobicity following inhibitor 3 adsorption. SEM-EDX and XPS studies confirmed the definitive presence of inhibitor 3 on the mild steel surface. Density functional theory (DFT) studies revealed the frontier molecular orbitals with which the metal surface interacts. A detailed corrosion inhibition mechanism has been offered in the context of adsorption isotherm and DFT studies.

Experimental and Quantum Chemical Studies of Carboxylates As Corrosion Inhibitors for AM50 Alloy in Ph Neutral NaCl Solution

Inhibition effect and theoretical investigation of dicarboxylic acid derivatives as corrosion inhibitor for aluminium alloy

Simple Preparation of Aminothiourea-Modified Chitosan As Corrosion Inhibitor and Heavy Metal Ion Adsorbent.

Corrosion Inhibition of Pure Mg Containing a High Level of Iron Impurity in Ph Neutral NaCl Solution

Corrosion Inhibition of Ammonium Molybdate for AA6061 Alloy in NaCl Solution and Its Synergistic Effect with Calcium Gluconate

Corrosion Inhibition of N80 Steel Using Novel Diquaternary Ammonium Salts in 15% Hydrochloric Acid

A Study on Corrosion Inhibitor for Magnesium Alloy

Electrochemical and DFT studies of quinoline derivatives on corrosion inhibition of AA5052 aluminium alloy in NaCl solution

Electrochemical and Quantum Chemical Studies of Azoles As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Two α-aminophosphonics acids as corrosion inhibitors for carbon steel in 0.5 M HCl: Electrochemical and DFT/MD simulation.

In-depth experimental assessment of two new aminocoumarin derivatives as corrosion inhibitors for carbon steel in HCl media combined with AFM, SEM/EDX, contact angle, and DFT/MDs simulations

Electrochemical Impedance Spectroscopy, Atomistic Simulation, and Quantum Chemistry Simulation of the Mechanism of Five Inhibitors to Prevent Acidizing Corrosion of N80 Steel in 15% (wt) HCl Solution

Inhibition of Carboxymenthylchitosan to Corrosion of Aluminum in Acidic Solution

Theoretical Study to Evaluate Experimental Corrosion Inhibition of Ammonium Salt Derivatives for Mild Steel in Acidic Solution

Theoretical Study of N-thiazolyl-2-cyanoacetamide Derivatives As Corrosion Inhibitor for Aluminum in Alkaline Environments

A Glycine Derivative As Corrosion Inhibitor for Carbon Steel in 3.5 Wt% NaCl Solution: the Combined Experimental and Theoretical Calculation

Passivation of Corrosion Product Layer on AM50 Mg by Corrosion Inhibitor

Exploration the Inhibition Mechanism of Sodium Dodecyl Sulfate on Mg Alloy

Experimental and Theoretical Investigation on Corrosion Inhibition of AA5052 Aluminium Alloy by L-Cysteine in Alkaline Solution

Lithium Carbonate and Oxalate Salts as Corrosion Inhibitors for Magnesium Alloy AZ31 B in NaCl Solution