Abstract:The anodic polarization response of magnesium alloy AZ31 was first characterized during exposure to aerated 0.1 M NaCl solutions with millimolar additions of NaVO3, Na3PO4, Na2HPO4, NaF and various pairings to assess their ability to inhibit corrosion kinetics and retard localized corrosion. Each of the candidate inhibitors reduced the corrosion rate of the alloy to some degree. A Na3PO4–NaVO3 pair produced a good inhibiting effect decreasing the corrosion rate to about 10−7 A/cm2, which was two orders of magnitude lower than the uninhibited control case. A Bliss Independence assessment indicated that this inhibitor pair acted synergistically. A Na2HPO4–NaVO3 pair reduced the corrosion rate to 10−6 A/cm2 but was not assessed to be acting synergistically. The NaVO3–NaF pair did not reduce the corrosion rate significantly compared to the control case and was an antagonistic pairing. SEM imaging showed film formation due to exposure, which appears to be the origin of the observed inhibition. The resistance to localized corrosion was assessed as the difference in the breakdown potential and the corrosion potential, with larger values indicating a lower probability of localized corrosion during free corrosion exposures. The effects of the inhibitors on this characteristic were mixed, but each of the inhibitor pairs yielded potential differences in excess of 100 mV. A conceptual conversion coating process based on a mixture of vanadate and phosphate compounds were demonstrated. A fluoride-bearing formulation produced coatings whose total impedance was increased by a factor of two compared to an uncoated control. A fluoride-free formulation produced coatings whose corrosion resistance was increased by more than a factor of three.

Corrosion Inhibition of AZ31-xLi (x = 4, 8, 12) Magnesium Alloys in Sodium Chloride Solutions by Aqueous Molybdate

Lithium Carbonate and Oxalate Salts as Corrosion Inhibitors for Magnesium Alloy AZ31 B in NaCl Solution

A Combined Inhibiting Effect of Sodium Alginate and Sodium Phosphate on the Corrosion of Magnesium Alloy Az31 in Nacl Solution

Corrosion Inhibition of AZ31 Magnesium Alloy by Sodium Benzoate

Inhibiting Effect of Sodium Lignosulphonate on the Corrosion of AZ31 Magnesium Alloy in NaCl Solution

Experimental and Theoretical Studies on Corrosion Inhibition Behavior of Three Imidazolium-Based Ionic Liquids for Magnesium Alloys in Sodium Chloride Solution

Insight into Inhibition Behavior of Novel Ionic Liquids for Magnesium Alloy in NaCl Solution: Experimental and Theoretical Investigation

Corrosion Inhibition of Magnesium Alloy in NaCl Solution by Ionic Liquid: Synthesis, Electrochemical and Theoretical Studies

Synergistic Inhibition Behavior of Sodium Diethyldithiocarbamate and Sodium Acetate for AZ31B Magnesium Alloy in NaCl Solution

Effect of the Sodium Silicate Inhibitor on the Corrosion Protection of AZ31 Magnesium Alloy

Inhibition of corrosion of magnesium alloy by molybdate in simulated cooling water

Inhibition Effect of Sodium Phosphate on the Corrosion of AZ31 Magnesium Alloy in 3.5 wt% NaCl Solution

A Study of Environment-Friendly Synergistic Inhibitors for AZ91D Magnesium Alloy

Corrosion Inhibition of AZ31 Magnesium Alloy in 3.5% NaCl by Green Corrosion Inhibitor: Maleic Hydrazide Derivative

Inhibition of Molybdate Salt on Dissolution of Magnesium Alloys in Phosphoric Acid

Adsorption and Corrosion Inhibition Behavior of Sodium Dodecylbenzenesulfonate on AZ31 Magnesium Alloy

Sodium dodecyl sulfate (SDS) as an effective corrosion inhibitor for Mg-8Li-3Al alloy in aqueous NaCl: A combined experimental and theoretical investigation

Improving Environmental Adaptability and Long-Term Corrosion Resistance of Mg Alloys by Pyrazole Ionic Liquids: Experimental and Theoretical Studies

The Effect of Vanadate, Phosphate, Fluoride Compounds on the Aqueous Corrosion of Magnesium Alloy AZ31 in Dilute Chloride Solutions

On the in-situ aqueous stability of an Mg-Li-(Al-Y-Zr) alloy: Role of Li

Insight into synergistic corrosion inhibition of sodium benzoate and sodium silicate on LZ91 magnesium alloy: Experimental and theoretical calculations