Abstract:The assessment of two diamine derivatives, TMD and IPDA, as corrosion inhibitors for aluminium in hydrochloric acid (HCl) at concentrations of 0.2 M, 0.3 M, and 0.4 M. (4S)—2,2,4-trimethyl hexane-1,6-diamine (TMD) and (1R,3R)-3-(amino methyl)-3,5,5-trimethyl cyclohexane-1-amine (IPDA) are verified for their ability to inhibit corrosion of Al in acidic conditions. The evaluation is conducted using electrochemical impedance spectroscopy (EIS), potentiodynamics polarization (PDP), and gravimetric methods. The inhibitors' effectiveness depends on their concentration (ranging from 20 to 50 mM) and molecular structure. Because TMD has more anchoring functional groups, it had the best inhibitory efficacy, reaching a maximum of 98.3% at 50 mM concentration. It is looked into how temperature (313–333 K) affects corrosion behaviour. As per Langmuir's adsorption isotherm, the temperature probably influences the ability of inhibitors to adsorb on the surface of aluminium, pointing to a monolayer adsorption mechanism. Calculated and described are the thermodynamics activation factors for the dissolution process of Al in both inhibited along uninhibited solutions. The stability of the inhibitor-Al contact and the reaction kinetics are revealed by these characteristics. The creation of a protective covering on the Al surfaces was validated by surface investigation techniques such as atomic force microscopy, scanning electron microscopy, and energy-dispersive X-ray (EDX) analysis, demonstrating the inhibitors' efficacy in preventing corrosion. The inhibitors' molecular chemical makeup as well as the degree of inhibitory efficacy is correlated in theoretical investigations employing molecular dynamics simulations and density functional theory. Theoretical calculations shed additional light on the adsorption mechanism.

Corrosion inhibition of aluminum in sodium hydroxide solutions using some inorganic anions

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

Bis(2-hydroxyethyl) ammonium dodecanoate and its constituents as inhibitors for Al corrosion and H2 production in acid medium

Corrosion Inhibition by Surfactants for Industrial Pure Aluminium in NaOH Solution

The Cooperative Inhibition Effects of Alkaline Earth Metal Ions and Edta on the Corrosion of Pure Aluminum in an Alkaline Solution

Experimental and Quantum Chemical Studies of Carboxylates As Corrosion Inhibitors for AM50 Alloy in Ph Neutral NaCl Solution

Corrosion Inhibition of Pure Mg Containing a High Level of Iron Impurity in Ph Neutral NaCl Solution

Experimental and theoretical studies of the efficiency of metal–organic frameworks (MOFs) in preventing aluminum corrosion in hydrochloric acid solution

The Corrosion and Electrochemical Behavior of Pure Aluminum in Additive‐containing Alkaline Methanol–water Mixed Solutions

Influence of sodium alginate and chromate on aluminum corrosion in simulated HVDC cooling water

Experimental and Theoretical Study on Corrosion Inhibition of O-Phenanthroline for Aluminum in HCl Solution

Inhibition Effect of Calcium Tartrate on the Corrosion of Pure Aluminum in an Alkaline Solution

Corrosion and Electrochemical Behaviors of Aluminum Anode in Alkaline Ethanol Organic Solution

Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

Corrosion Inhibition of Ammonium Molybdate for AA6061 Alloy in NaCl Solution and Its Synergistic Effect with Calcium Gluconate

Estimation of the Inhibition Efficiency of Polysorbate 80 Against the Corrosion of 6061 Aluminum Alloy in Di-Sodium Hydrogen Orthophosphate Solution

Sodium Molybdate As A Corrosion Inhibitor for Aluminium in H3po4 Solution

Anticorrosion properties of 5,5′-dithiobis-(2-nitrobenzoic acid) and sodium sulfite compounds for aluminum alloy 2024-T3 in saline solution: Electrochemical, characterization and theoretical investigations

Corrosion inhibition performance of organic compounds and theoretical calculations based on density functional theory (DFT)

Corrosion resistance of aluminum against acid activation in 1.0 M HCl by symmetrical ball - type zinc phthalocyanine

Electrochemical, Surface Analysis, and Theoretical Investigation of 3-Hydroxy-5-(phenylamino)-4-(p-tolyldiazenyl)thiophen-2-yl)(phenyl)methanone As a Corrosion Inhibitor for Carbon Steel in a Molar Hydrochloric Acid Solution