Abstract:Pure aluminum electrodes were treated in alkaline stannate solutions, and the effects of some factors such as NaOH content and treating time were explored. The corrosion and electrochemical performances of the modified aluminum anodes in 4.0M KOH methanol–water mixed solutions containing a methanol/water volume ratio of 7:3 (30% water) with and without stannate were investigated by means of hydrogen collection, polarization curve, galvanostatic discharge, scanning electron microscopy (SEM), and energy dispersive analysis of X-ray (EDAX). Metallic tin with high hydrogen evolution overpotential was deposited in aluminum surfaces by the modification treatments using stannate, resulting in the relatively low corrosion rate and markedly enhanced discharge performance of the modified aluminum anodes. In our experimental range the aluminum electrode treated in the solution with 0.1M NaOH for 30min showed lower corrosion rate and better discharge performance. The addition of Na2SnO3 in 4.0M KOH methanol–water mixed solutions with 30% water inhibited the corrosion of the aluminum electrodes modified in the treating solution with 0.1M NaOH for 30min, resulting from the deposition of tin with high hydrogen evolution overpotential in aluminum surfaces. The deposition of metallic tin on the electrode surface and the existence of stannate in the electrolytes were responsible for the notable enhancement in the discharge performance of the modified aluminum anode.

The Corrosion and Electrochemical Behavior of Pure Aluminum in Additive‐containing Alkaline Methanol–water Mixed Solutions

Influences of Zinc Oxide and an Organic Additive on the Electrochemical Behavior of Pure Aluminum in an Alkaline Solution

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Corrosion and Electrochemical Behaviors of Aluminum Anode in Alkaline Ethanol Organic Solution

The Corrosion and Electrochemical Behaviour of Pure Aluminium in Alkaline Methanol Solutions

Corrosion and Electrochemical Behaviors of Pure Aluminum in Novel KOH‐ionic Liquid‐water Solutions

Electrochemical Properties of Aluminum Anode in Alkaline Organic Solution

EFFECT OF ADDITIVE K2MnO4 ON ELECTROCHEMICAL BEHAVIOUR OF ALUMINUM ANODE IN ALKALINE SOLUTION

The Effects of Surface Treatment and Stannate As an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol–water Solution

Electrochemical behaviour of aluminum in alkaline solution

The Cooperative Inhibition Effects of Alkaline Earth Metal Ions and Edta on the Corrosion of Pure Aluminum in an Alkaline Solution

Influences of L-Cysteine/Zinc Oxide Additive on the Electrochemical Behavior of Pure Aluminum in Alkaline Solution

The effects of polyethylene glycol (PEG) as an electrolyte additive on the corrosion behavior and electrochemical performances of pure aluminum in an alkaline zincate solution

Anodic Dissolution of Aluminum in KOH Ethanol Solutions

Corrosion inhibition of aluminum in sodium hydroxide solutions using some inorganic anions

Corrosion Behavior Improvements of High Active Aluminum Alloy Anode in Alkaline Solution by Adding Inhibitors

Effects of Electrolyte Additives on Behavior of Al-In-Ga-Pb Alloy Anode

Electrochemical Behavior of Al-1.5Mg-0.05Sn-0.01Ga Alloy in KOH Ethanol-Water Solutions for Al-Air Battery

Effects of Additives in the Alkaline Electrolyte on Anode Behavior of Aluminum

Effects of Additives on the Electrochemical Behaviors of Zn Electrode in Alkaline Solutions

Corrosion Behavior of ZnO-reinforced Coating on Aluminum Alloy Prepared by Plasma Electrolytic Oxidation