Abstract:This study investigates the electrochemical behavior of aluminum (Al) and aluminum‑tin (Al-Sn) alloy as anodes in aluminum-air (Al-air) batteries in a potassium hydroxide (KOH) electrolyte with varying concentrations of lithium hydroxide (LiOH), in both the presence and absence of carbon dioxide gas (CO2). Experimental techniques such as potentiodynamic polarization (Tafel behavior), galvanostatic charging-discharging processes, and electrochemical impedance spectroscopy (EIS) were employed. Characterization techniques including X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDX) were utilized to analyze the surface products of each electrode. The findings indicate a significant decrease in the corrosion current density (i corr.) for both two electrodes with increasing LiOH concentration, however, Al-Sn exhibits lower values than those of commercial Al. Moreover, the presence of Li-ions revealed an interesting phenomenon of Al, where i corr. gradually decreased with temperature rise. Also, in the presence of CO2, i corr. significantly decreased for both two electrodes, particularly Al-Sn, indicating complete repression of the corrosion process on the surface. The corrosion rate of the studied electrodes in basic solutions, with and without CO2, follows the order: KOH > KOH + LiOH > KOH + LiOH + CO2. Galvanostatic charge-discharge measurements demonstrated higher capacity, improved electrochemical performance, and excellent charge-discharge behavior in the presence of LiOH. The electrochemical findings align well with the results from XRD, SEM, and EDX analysis.

Anodic Dissolution of Aluminum in KOH Ethanol Solutions

Electrochemical Behavior of Al-1.5Mg-0.05Sn-0.01Ga Alloy in KOH Ethanol-Water Solutions for Al-Air Battery

Corrosion and Electrochemical Behaviors of Aluminum Anode in Alkaline Ethanol Organic Solution

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Electrochemical Properties of Aluminum Anode in Alkaline Organic Solution

Electrochemical behaviour of aluminum in alkaline solution

Corrosion and Electrochemical Behaviors of Pure Aluminum in Novel KOH‐ionic Liquid‐water Solutions

Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Anodic Dissolution of Al in KOH Solutions in the Mixed Ethanol–Acetonitrile Solvent

The Study of Industrial Aluminum Alloy As Anodes for Aluminum-Air Batteries in Alkaline Electrolytes

The Corrosion and Electrochemical Behavior of Pure Aluminum in Additive‐containing Alkaline Methanol–water Mixed Solutions

Investigation of the Commercial Aluminum Alloys as Anode Materials for Alkaline Aluminum-air Batteries

The Corrosion and Electrochemical Behaviour of Pure Aluminium in Alkaline Methanol Solutions

Tracing the impact of CO2 on the electrochemical and charge–discharge behavior for Al–Mg alloy in KOH and LiOH electrolytes for battery applications

Impact of Li-ions and CO2 on the electrochemical efficiency of Al and Al-4%Sn in KOH electrolyte for alkaline batteries application

Corrosion inhibition of polyelectrolytes to the Al anode in Al-air battery: A comparative study of functional group effect

Electrochemical Behavior and Discharge Performance of Al-1zn-0.4mn-0.1sn-Xbi As Anode Alloys for Al-Air Battery in Koh Solution

Performance of Anodes with Proper Active Metal Elements Added to the Al-0.16wt%In in Alkaline Electrolyte for Al-Air Batteries

Performance of Fine Structured Aluminum Anodes in Neutral and Alkaline Electrolytes for Al-air Batteries

Interface engineering toward self-corrosion inhibited alkaline aluminum-air battery via optimized electrolyte system

Evaluation of an Alkaline Electrolyte System for Al-Air Battery