Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Tao Wang,Yuan Zhu,Yifan Li,Kai Yang,Wenyi Lu,Ke Peng,Zhongliang Tian

DOI: https://doi.org/10.1039/d2se01341j

IF: 6.813

2022-01-01

Sustainable Energy & Fuels

Abstract:Employed as anode materials for aqueous alkaline Al–air batteries, commercial aluminum alloys realized energy conversion and resource sustainability.

What problem does this paper attempt to address?

Investigation of the Commercial Aluminum Alloys as Anode Materials for Alkaline Aluminum-air Batteries

Tao Wang,Yuan Zhu,Yifan Li,Kai Yang,Wenyi Lu,Ke Peng,Zhongliang Tian

DOI: https://doi.org/10.1039/d2se01341j

2022-11-26

Abstract:Metal Al is an attractive energy carrier in Al-based batteries with promising recyclability and sustainability in alkaline solutions. However, finding applicable Al anode materials for alkaline Al-air batteries is knotty. In this study, commercial Al alloys are employed as anode materials for Al-air batteries. The self-corrosion behavior, electrochemical properties, composition, and microstructure of the alloys and their relationships are systematically investigated with a hydrogen collection method, electrochemical measurements, and multiple characterizations. The results show that the 6061 Al alloy (A6061) presents a low hydrogen evolution rate and superior electrochemical performance. The hydrogen evolution reaction is found to be inhibited by increasing the current density. The A6061 anode presents a high anodic efficiency of 89.28%, a specific capacity of 2660.69 mAh g-1, and an energy density of 2119.09 Wh kg-1 at 80 mA cm-2. The exceptional performance is due to its crystallographic orientation which is beneficial for Al dissolution to promote electrochemical activity. This study could provide more understanding of commercial Al alloy anodes and is conducive to optimizing Al anode structure.

materials science, multidisciplinary,chemistry, physical,energy & fuels
The Study of Industrial Aluminum Alloy As Anodes for Aluminum-Air Batteries in Alkaline Electrolytes

Liang Fan,Huimin Lu,Jing Leng,Zegao Sun,Chunbo Chen

DOI: https://doi.org/10.1149/2.0021602jes

IF: 3.9

2016-01-01

Journal of The Electrochemical Society

Abstract:Aluminum is attracting interest due to the good application prospect as anode for metal-air batteries in alkaline solutions. In this paper, the corrosion behavior and electrochemical properties of industrial aluminum alloy are investigated using hydrogen collection method, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) in 4 M NaOH and 4 M KOH. Battery performances are tested by constant current discharge at different current densities. The results show 8011 Al alloy has better electrochemical properties, discharge energy and power density. Considering the cost and performance, 8011 Al alloy is one of the most promising low-cost and high performance Al anode for Al-air batteries. (C) 2015 The Electrochemical Society.
Effect Factors on the Performances of Commercial Al Alloy As Anode for Al-Air Batteries

Yuan Zhu,Zhifan Hua,Yao Lu,Ziyuan Wang,Zhongliang Tian,Ke Peng

DOI: https://doi.org/10.1021/acs.energyfuels.3c01504

IF: 4.6541

2023-01-01

Energy & Fuels

Abstract:Commercial Al alloys are prospective anodes for Al-airbatteriesin alkaline solutions owing to the merits of largest output and lowcost. Herein, the influence factors of corrosion behavior and electrochemicalproperties on the commercial Al alloys as anodes are investigatedin detail through the hydrogen collection method and multiple electrochemicalmeasurements. The factors include alloy grade, solution temperature,and electrolyte concentration. The results show that the 7075 alloydisplays a lower self-corrosion rate and better electrochemical properties,which presents a high specific capacity of 2508.04 mAh g(-1) at 75 mA cm(-2) and a high energy capacity of 2020.64Wh kg(-1) at 50 mA cm(-2). Consideringthe performance, the 7075 alloy can be applied to the preferred anodematerial for Al-air batteries. The study is of great significancefor understanding the multicomponent commercial Al alloy anodes inalkaline batteries.
Properties and composition of the spent electrolyte for premium circulation mediated by Al-air batteries.

Hao Cheng,Zhifan Hua,Yuan Zhu,Tao Wang,Zheng Li,Yao Lu,Zhongliang Tian,Wenyi Lu

DOI: https://doi.org/10.1039/d3cp00928a

IF: 3.3

2023-01-01

Physical Chemistry Chemical Physics

Abstract:Al-air batteries can serve as a bridge for high-quality cyclic utilization of aluminum resources. However, limited insights into the spent electrolyte are challenging to accurately adjust the recovery process to obtain premium Al-containing products. Herein, the properties and composition of the spent electrolyte were explored through experiments and theoretical calculations. The results demonstrate that the viscosity of the spent electrolyte increased with the rise in discharge current density, time and temperature under highly alkaline conditions, while the ionic conductivity and causticity obviously decreased. Al(OH) was the prime and balanced aluminate species when the battery was discharged at 25 °C and coexisted with a bit of [AlO(OH)], [AlO(OH)] and Al(OH) ions. Especially, the characteristics of the spent electrolyte were mainly dominated by the discharge time and temperature when the current density was continuously increased. There was only Al(OH) in the electrolyte at a higher discharge temperature. The DFT results also reveal that the polynuclear aluminate ions were produced by the interaction between the mononuclear aluminate ion Al(OH) and OH. This work manifests a profound insight into the spent electrolyte from Al-air batteries for the efficient recycling of aluminum resources.
Spray-formed commercial aluminum alloy anodes with suppressed self-corrosion for Al-Air batteries

Jianming Ren,Tao Liu,Jiao Zhang,Min Jiang,Qing Dong,Chaopeng Fu

DOI: https://doi.org/10.1016/j.jpowsour.2022.231082

IF: 9.2

2022-03-01

Journal of Power Sources

Abstract:Commercial 7050 Al alloys produced by spray forming technique and subsequent heat treatment have been investigated as anodes for Al-air batteries with greatly suppressed self-corrosion. The microstructures of the prepared Al alloy anode have been characterized and compared with those of the cast 7050 Al alloy. The spray formed Al anode possesses finer grains and lower volume fraction and discontinuous distribution of the second phases, leading to a smaller self-corrosion rate. After deformation and heat treatment, the spray formed Al alloy shows a further reduced volume fraction of the second phase and a high fraction of low angle grain boundaries. Therefore, the Al-air battery with the prepared Al anode displays a large specific capacity and a high working voltage. This study demonstrates that commercial Al alloys are likely to be used as anodes for Al-air batteries by the combination of spray forming and proper heat treatment.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Improving Energy Efficiency of Commercial Aluminum Alloy As Anodes for Al-air Battery Through Introducing Micro-Nanoscale AlSb Precipitates

Pengju Zhang,Jilai Xue,Xuan Liu,Zengjie Wang,Xiang Li,Kaixi Jiang

DOI: https://doi.org/10.1016/j.electacta.2022.140331

IF: 6.6

2022-01-01

Electrochimica Acta

Abstract:The micro-nanoscale AlSb precipitates are introduced into selected commercial aluminum alloys as anode material for alkaline Al-air battery, and their corrosion behaviors, microstructure and discharge properties are investigated in details. It is found that such Sb addition can coexist in harmonization with already added other alloying elements in the Al alloys, and further bring out the improved microstructure and the electrochemical performance as the Al anodes. The energy density of 1080 alloy with Sb (1544 Wh.kg(-1)) is 30.9% higher than that without Sb at 10 mA.cm(-2). The resulting electrochemical impedance spectroscopy (EIS) with Sb addition demonstrates that the diffusion resistance (RC) and inductance (L) reduce with decreasing thickness of passive film on the anode surface while increasing its discharge voltage. The improved refinement in microstructure can also restrain hydrogen evolution from the Al-based anode. The fundamental information obtained is useful for designing and fabricating the Al anode products from low-cost commercial alloys with added-on electrochemical performance.
Research progress in Al alloy anodes for alkaline Al-air battery

Fang-xia SHU,Zhao-wen WANG,Bing-liang GAO,Xu-guang YU,Zhu-xian QIU

DOI: https://doi.org/10.3969/j.issn.1001-1579.2005.02.034

2005-01-01

Abstract:By development of new Al alloy anodic materials and corresponding electrolyte additives, the eminent progress in Al-air (battery) were achieved in recent years. The research progress in Al alloy anodes for alkaline Al-air battery in the latest decades worldwide was reviewed from activation-passivation mechanism, the effects of the alloying elements, (solution)-phase inhibition of corrosion and the application and the future perspective.
ADVANCES IN DEVELOPMENT AND APPLICATION OF ALUMINUM-ANODE MATERIALS

王兆文,李延祥,李庆峰,高炳亮,邱竹贤

DOI: https://doi.org/10.3969/j.issn.2095-1744.2002.01.006

2002-01-01

Abstract:The research and development of anodic materials used in aluminum batteries are reviewed. The activation of aluminum anode and increase of its corrosion-resistivity are accomplished by alloying. The aluminum anodic materials are applied to the batteries with aqueous solution electrolytes such as Al-MnO 2, Al-AgO, Al-air and Al-H 2O 2 batteries, and the batteries with the molten salt electrolytes or the organic electrolytes. The new advances on aluminum batteries are achieved by development of new anodic materials and additives for electrolyte, the utilization field of aluminum electrochemistry is enlarged.
Research progress in aluminum alloy anodes for aluminum-air battery

Huo-qing LU,Zhou-guang LU,Dong SHEN,You-gen TANG

DOI: https://doi.org/10.3969/j.issn.1001-1579.2012.04.016

2012-01-01

Abstract:The research progress in aluminum(Al) alloy anodes for Al-air battery was reviewed from Al activation-passivation mechanism and effects of alloying elements,such as Ga,In,Mg,Sn,Mn,Bi and Pb.
Performance of Anodes with Proper Active Metal Elements Added to the Al-0.16wt%In in Alkaline Electrolyte for Al-Air Batteries

Huimin Lu,Neale Neelameggham,Leng Jing,Jianxue Liu

DOI: https://doi.org/10.1007/978-3-030-36830-2_9

2020-01-01

Abstract:Wind energy and solar energy are stored in aluminum through low-temperature aluminum electrolysis, and then the distributed energy generation by metallic fuel cells realizes renewable energy utilization. Aluminum is an ideal material for metallic fuel cells. In this research, the performance of Al-air batteries based on pureAl, Al-0.16 wt%In, Al-0.16 wt%In-0.1wt%Ga, Al-0.16 wt%In-0.5wt%Bi, Al-0.16 wt%In-0.12 wt%Sn, and Al-0.16 wt%In-3 wt%Zn anodes in 4 M NaOH solution was investigated by galvanostatic discharge test. The electrochemical properties of the anodes were investigated in the same electrolyte using electrochemical impedance spectroscopy (EIS) and polarization curves. Battery performance was tested by constant current discharge at 20 mA cm(-2) current density. The characteristics of the anodes after discharge were investigated by scanning electron microscopy (SEM) and energy dispersive analysis of X-ray (EDAX). Results confirm that compared with pure Al and Al-0.16 wt%In in 4 M NaOH, the electrochemical properties of Al-0.16 wt%In-0.1 wt%Ga anode restrains hydrogen evolution, improves electrochemical activity, and increases anodic utilization rate.
Performance of Fine Structured Aluminum Anodes in Neutral and Alkaline Electrolytes for Al-air Batteries

Liang Fan,Huimin Lu,Jing Leng

DOI: https://doi.org/10.1016/j.electacta.2015.03.002

IF: 6.6

2015-01-01

Electrochimica Acta

Abstract:Aluminum (Al) is an innovative anode material for metal-air batteries. But high corrosion rates and large polarization interfere with its commercial application. In the study reported in this paper, an ultrafine-grained (UFG) aluminum anode was prepared by equal channel angular pressing (ECAP) at room temperature. The electrochemical properties of the Al anode were investigated using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization in 4 mol L-1 NaOH, KOH and 2 mol L-1 NaCl. Battery performance using the anodes was tested by constant current discharge at 10 mA cm(-2) in the referenced electrolytes. The experimental results showed that finer grain sizes enhance battery performance in alkaline electrolytes, due to active dissolution of the Al anode. But in the NaCl electrolyte, the fine grain size of the Al anode offers no performance due to the blockage of the oxide film and local corrosion. This anode fabrication approach provides a means for improving the performance Al-air battery in alkaline electrolytes. (C) 2015 Elsevier Ltd. All rights reserved.
Deformation-Driven Modification of Al-Li-Mg-Zn-Cu High-Alloy Aluminum As Anodes for Primary Aluminum-Air Batteries

Yuming Xie,Xiangchen Meng,Dongxin Mao,Yuexin Chang,Zhiwei Qin,Xiaotian Ma,Long Wan,Yongxian Huang

DOI: https://doi.org/10.1016/j.scriptamat.2022.114551

IF: 6.302

2022-01-01

Scripta Materialia

Abstract:Aiming at high-energy-density off-grid application, severe plastic deformation-modified Al-Li-Mg-Zn-Cu high-alloy aluminum obtained by deformation-driven modification was proposed to serve as anodes for primary aluminum-air batteries. Homogeneous microstructures induced by the fragmentation of second phases and dynamic recrystallization suppressed the formation of the hydroxides-eutectic skeletons to isolate anodes from alkaline electrolytes. The alloying elements contributed to the inhibition of hydrogen evolution self-corrosion, the mitigation of polarization, and the enhancement of the discharge voltage. The self-corrosion rate was only one-seventh of the 5N pure aluminum. The power and energy densities reached 88.3 mW cm(-2) and 2.73 Wh g(-1), respectively, which is better than those of pure aluminum (c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
A Review of Al Alloy Anodes for Al–Air Batteries in Neutral and Alkaline Aqueous Electrolytes

Pengfei Wu,Shengan Wu,Dan Sun,Yougen Tang,Haiyan Wang

DOI: https://doi.org/10.1007/s40195-020-01140-x

2020-01-01

Abstract:Aluminum–air (Al–air) batteries are promising candidates for energy storage applications because of their high theoretical energy density and low cost. Nevertheless, their developments have been severely hindered by multiple obstacles, among which the activation and self-corrosion inhibition of Al anode have been considered to be significant challenges. In neutral electrolytes, the main problem is the activation of Al anode, while the self-corrosion of Al anode becomes dominant in alkaline electrolytes. Considerable efforts have been devoted to overcoming the dilemma associated with the Al anode. This review firstly underscores the underlying mechanisms of passivation and self-corrosion of Al anode in different electrolytes. Then, specific attentions are paid to Al alloy anode, including the role of various elements and standard processing technology. Finally, general conclusions, current limitations, and future perspectives on Al alloy anode are presented.
Aluminum Alloys as Anodes for Aluminum Batteries

Marco Bandiera,Arianna Pavesi,Giorgio Valota,Mary Angel Abello,Valentina Trombetta,Andrea Bonfanti,Alessandro Mancini,Federico Bertasi

DOI: https://doi.org/10.1149/ma2023-011412mtgabs

2023-08-28

ECS Meeting Abstracts

Abstract:The development of batteries based on metals alternative to Lithium (e.g. Na, Mg, Zn, Al) requires the investigation of new electrodes and electrolytes. [1,2]. This is particularly true in the case of non-aqueous Aluminum batteries which typically include a pure (>99.8%) Aluminum anode which: a) suffer of poor cycling stability and low coulombic efficiency; b) is particularly subjected to dendrite growth; c) can undergo to corrosion phenomena upon cycling; and d) show a poor compatibility toward chloroaluminated electrolytes [3]. In this regard, the development of Aluminum alloys, alternative to pure Al anodes, is a challenging task which is barely investigated in the field of Aluminum ion batteries and requires experience in both battery electrochemistry and Aluminum metallurgy and casting. In this scenario, the proposed work investigates the synthesis and characterization of ternary Aluminum, alloys comprising Si, Ti and B as alloying elements, as anodes for Al-ion batteries [4]. Deposition/stripping measurements, impedance spectroscopy, metallographic analysis, EDXS and XRD techniques unveil the complex interplay existing between the microstructures of the alloys and the obtained electrochemical performance. It is demonstrated that a remarkable improvement in the: a) oxidation/reduction currents and overvoltages; and b) interfacial stability with the electrolyte; can be obtained, with respect to a conventional Al anode. Results allow to demonstrate that the investigation of Aluminum alloys can be crucial for the development of future Aluminum batteries. [1] F Bertasi, C Hettige, F Sepehr, X Bogle, G Pagot, K Vezzù, E Negro, S J Paddison, S G Greenbaum, M Vittadello, V Di Noto, ChemSusChem, 2015, 8 (18), 3069-3076 [2] F Bertasi, F Sepehr, G Pagot, SJ Paddison, V Di Noto, Advanced Functional Materials 2016, 26 (27), 4860-4865 [3] Y Zhang, S Liu, Y Ji, J Ma, H Yu, Advanced Materials 2018, 30 (38), 1706310 [4] Italian Patent Application n° 102022000024522
Optimization of an Artificial Solid Electrolyte Interphase Formed on an Aluminum Anode and Its Application in Rechargeable Aqueous Aluminum Batteries

Changfu Li,Zichuan Lv,Huiping Du,Lishun Zhao,Jintao Yao,Yuqing Han,Hui Chen,Guoxin Zhang,Yinghui Bian

DOI: https://doi.org/10.1021/acsami.3c09885

IF: 9.5

2023-10-24

ACS Applied Materials & Interfaces

Abstract:Electrochemical cells that incorporate aluminum (Al) as the active material have become increasingly popular due to the advantages of high energy density, cost-effectiveness, and superior safety features. Despite the progress made by research groups in developing rechargeable Al//M(x)O(y) (M = Mn, V, etc.) cells using an aqueous Al trifluoromethanesulfonate-based electrolyte, the reactions occurring at the Al anode are still not fully understood. In this study, we explore the artificial solid...

materials science, multidisciplinary,nanoscience & nanotechnology
Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum

Ruijie Zhao,Pan He,Fengyang Yu,Jianhong Yang,Zhenkun Sun,Wei Hu

DOI: https://doi.org/10.1016/j.est.2023.108985

IF: 9.4

2023-01-01

Journal of Energy Storage

Abstract:The aluminum-air battery (AAB) is a promising type of power battery for electric vehicles, however, cost of high-purity aluminum and self-corrosion prevent its commercialization. In this work, aluminum alloys prepared from commercially pure aluminum are made as the anode of AAB. The discharge performances of the prepared anodes of Al-Mg-In, Al-Mg-Mn-In and Al-Mg-Mn-In-Sn alloys along with the commercially pure aluminum and 4N grade aluminum are carefully investigated. Results show that the anodes of Al-0.5Mg-0.2Mn-0.1In and Al-0.5Mg-0.2Mn-0.1In-0.1Sn exhibit largely improved discharge performances compared to the commercially pure aluminum and 4N grade aluminum. Although the maximum power density of Al-0.5Mg-0.2Mn-0.1In is only 88 mW cm−2 and 157 mW cm−2 at 25 °C and 60 °C, respectively, its corrosion resistance is much better than other alloys and the corresponding energy efficiencies are 26 % and 24 %. The Al-0.5Mg-0.2Mn-0.1In-0.1Sn alloy shows the highest discharge performance with the maximum power densities of 109 mW cm−2 and 204 mW cm−2 and the energy efficiencies of 28 % and 24 % at 25 °C and 60 °C, respectively. The excellent properties of these alloys can be attributed to the synergistic effects of In and Sn, and the improved corrosion resistance is due to the protective effect introduced by Mn.
Low-cost Aluminum Anodes for Primary Aluminum-Air Batteries Prepared by Friction Stir Processing

Yuming Xie,Jianing Dong,Gang He,Xiangchen Meng,Xiaotian Ma,Naijie Wang,Yongxian Huang

DOI: https://doi.org/10.1016/j.mfglet.2024.06.002

2024-01-01

Manufacturing Letters

Abstract:An economical Al-Mg-Si alloy, whose cost is only one-fifteenth of high-purity Al, was modified by friction stir processing towards low-cost high-performance aluminum anodes for primary aluminum-air batteries. The hydrogen evolution reaction was alleviated by the fragmentation of large precipitates and the dispersion of impurities, which was decreased to 0.257 mL/(cm (2) .min), and the power and energy densities increased by 36.4 % and 24.2 %, respectively. It indicated that this method provides novel opportunities to explore economical materials for primary Al-air batteries.
Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

Di Miao,Shiliang Li,Dongxiao Jin,Jiangtao Long,Jie Qu,Yun Wang,Zhenzhen Wu

DOI: https://doi.org/10.1002/smtd.202301255

IF: 12.4

2023-11-23

Small Methods

Abstract:Abstract Aluminum–air batteries (AABs), known for their high energy density, environmental friendliness, and cost‐effectiveness, show immense promise in the realm of energy conversion applications. Nonetheless, their commercialization has encountered inherent challenges of Al anode corrosion and material degradation. In this study, economical hybrid electrolyte additives to inhibit the Al corrosion are developed, safeguarding the integrity of the Al anode. Due to the synergistic interplay between the organic compound dithiothreitol, and inorganic compounds zinc chloride, a robust zinc film is formed on the Al surface This Zn film plays a pivotal role in quelling parasitic hydrogen evolution reactions that typically can plague the Al electrode. Consequently, the as‐prepared hybrid additive culminates in a remarkable enhancement to AABs, delivering exceptional discharge capacity of 1793.37 mAh g −1 , high energy density of 2047 Wh kg −1 , and excellent battery longevity (over 20 h in on/off cycling tests). This study, therefore, introduces a novel approach in utilizing hybrid electrolyte additives to effectively counteract corrosion‐related challenges and boost the stability and performance of AABs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Research progress of the key technologies for aluminum air battery

Cheng WANG,Pingda QIU,Kedi CAI,Yao XIAO,Rui YANG,Pengjian ZUO

DOI: https://doi.org/10.16085/j.issn.1000-6613.2016.05.019

2016-01-01

Abstract:The metal air battery,also known as metal fuel cell,converts chemical energy of metals directly into electricity. Due to the rich reserves of aluminum in the crust and the rather high theoretical volume specific energy,the aluminum air battery has become one hot spot in recent years. However, the hydrogen evolution of aluminum in alkaline electrolyte has been hindering the development of aluminum air battery. This paper reviews the research progressof the key technologies for aluminum air battery,including aluminum alloy anode,aluminum corrosion inhibitor,structure of cathode, electrolyte and catalyst and so on. The use of aluminum alloy anode containing Sn,Ga,In and other elements,the processing of ultrafine grained aluminum,and the addition of aluminum corrosion inhibitor into electrolyte solution can improve the efficiency of aluminum electrode in a certain extent. While aluminum air battery has been utilized in many areas,it will have broader application prospects in the energy industry with the in-depth study.
Electrochemical Performance of Pure Al, Al–Sn, Al–Mg and Al–Mg–Sn Anodes for Al-air Batteries

Jianming Ren,Jianbo Ma,Jiao Zhang,Chaopeng Fu,Baode Sun

DOI: https://doi.org/10.1016/j.jallcom.2019.151708

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:In this work, pure Al, Al-Sn, Al-Mg, and Al-Mg-Sn alloys have been investigated as anodes for aluminum-air batteries. Effects of Mg and Sn additions on the aluminum anodes for Al-air battery in 4 mol L-1 KOH solution have been evaluated by self-corrosion test, open circuit potential, potentiodynamic polarization, electrochemical impedance spectroscopy, cell voltage and galvanostatic discharge as well as ab-initio energy calculation based on density functional theory. The results show that Al alloy anodes show better corrosion resistance and battery performance than the pure Al anodes. The self-corrosion rate of Al alloys increase in the following order: Al > Al-Sn > Al-Mg-Sn > Al-Mg. The Al-Mg alloy shows the smallest self-corrosion rate and largest capacity among the three Al alloy anodes. The Al-Mg-Sn alloy has the best electrochemical performance and battery discharge performance. SEM, EDS and 3D measuring laser microscope analysis of Al alloys are in good agreement with the self-corrosion test and electrochemical characteristics. Furthermore, the ab-initio energy calculation also reveals the positive role of alloying elements in enhancing corrosion and electrochemical performances. (C) 2019 Elsevier B.V. All rights reserved.

Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Investigation of the Commercial Aluminum Alloys as Anode Materials for Alkaline Aluminum-air Batteries

The Study of Industrial Aluminum Alloy As Anodes for Aluminum-Air Batteries in Alkaline Electrolytes

Effect Factors on the Performances of Commercial Al Alloy As Anode for Al-Air Batteries

Properties and composition of the spent electrolyte for premium circulation mediated by Al-air batteries.

Spray-formed commercial aluminum alloy anodes with suppressed self-corrosion for Al-Air batteries

Improving Energy Efficiency of Commercial Aluminum Alloy As Anodes for Al-air Battery Through Introducing Micro-Nanoscale AlSb Precipitates

Research progress in Al alloy anodes for alkaline Al-air battery

ADVANCES IN DEVELOPMENT AND APPLICATION OF ALUMINUM-ANODE MATERIALS

Research progress in aluminum alloy anodes for aluminum-air battery

Performance of Anodes with Proper Active Metal Elements Added to the Al-0.16wt%In in Alkaline Electrolyte for Al-Air Batteries

Performance of Fine Structured Aluminum Anodes in Neutral and Alkaline Electrolytes for Al-air Batteries

Deformation-Driven Modification of Al-Li-Mg-Zn-Cu High-Alloy Aluminum As Anodes for Primary Aluminum-Air Batteries

A Review of Al Alloy Anodes for Al–Air Batteries in Neutral and Alkaline Aqueous Electrolytes

Aluminum Alloys as Anodes for Aluminum Batteries

Optimization of an Artificial Solid Electrolyte Interphase Formed on an Aluminum Anode and Its Application in Rechargeable Aqueous Aluminum Batteries

Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum

Low-cost Aluminum Anodes for Primary Aluminum-Air Batteries Prepared by Friction Stir Processing

Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

Research progress of the key technologies for aluminum air battery

Electrochemical Performance of Pure Al, Al–Sn, Al–Mg and Al–Mg–Sn Anodes for Al-air Batteries