Abstract:Aqueous aluminum metal batteries (AMBs) are regarded as one of the most sustainable energy storage systems among post-lithium-ion candidates, which is attributable to their highest theoretical volumetric capacity, inherent safe operation, and low cost. Yet, the development of aqueous AMBs is plagued by the incapable aluminum plating in an aqueous solution and severe parasitic reactions, which results in the limited discharge voltage, thus making the development of aqueous AMBs unsuccessful so far. Here, we demonstrate that amorphization is an effective strategy to tackle these critical issues of a metallic Al anode by shifting the reduction potential for Al deposition. The amorphous aluminum (a-Al) interfacial layer is triggered by an in situ lithium-ion alloying/dealloying process on a metallic Al substrate with low strength. Unveiled by experimental and theoretical investigations, the amorphous structure greatly lowers the Al nucleation energy barrier, which forces the Al deposition competitive to the electron-stealing hydrogen evolution reaction (HER). Simultaneously, the inhibited HER mitigates the passivation, promoting interfacial ion transfer kinetics and enabling steady aluminum plating/stripping for 800 h in the symmetric cell. The resultant multiple full cells using Al@a-Al anodes deliver approximately a 0.6 V increase in the discharge voltage plateau compared to that of bare Al-based cells, which far outperform all reported aqueous AMBs. In both symmetric cells and full cells, the excellent electrochemical performances are achieved in a noncorrosive, low-cost, and fluorine-free Al2(SO4)3 electrolyte, which is ecofriendly and can be easily adapted for sustainable large-scale applications. This work brings an intriguing picture of the design of metallic anodes for reversible and high-voltage AMBs.

Challenges and Strategies of Aluminum Anodes for High‐Performance Aluminum–Air Batteries

A Mechanistic Overview of the Current Status and Future Challenges of Aluminum Anode and Electrolyte in Aluminum-Air Batteries

A Review of Al Alloy Anodes for Al–Air Batteries in Neutral and Alkaline Aqueous Electrolytes

Challenges and Strategies of Low‐Cost Aluminum Anodes for High‐Performance Al‐Based Batteries

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

A comprehensive review on recent progress in aluminumâair batteries

Dynamic Locking of Interfacial Side Reaction Sites Promotes Aluminum‐Air Batteries Close to Theoretical Capacity

A comprehensive review on recent progress in aluminum–air batteries

Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum

A Mechanistic Overview of the Current Status and Future Challenges in Air Cathode for Aluminum Air Batteries

Recent Progress and Future Trends of Aluminum Batteries

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

The Progress On Aluminum-Based Anode Materials For Lithium-Ion Batteries

An Overview and Future Perspectives of Aluminum Batteries

Investigation of the Commercial Aluminum Alloys as Anode Materials for Alkaline Aluminum-air Batteries

Engineering Triple‐Phase Interfaces around the Anode towards Practical Alkali Metal‐Air Batteries

Aluminum batteries: Unique potentials and addressing key challenges in energy storage

Electrolytes for Aluminum‐Ion Batteries: Progress and Outlook

Recent Advances in Interface Engineering and Architecture Design of Air-Stable and Water-Resistant Lithium Metal Anodes

Reversible Al Metal Anodes Enabled by Amorphization for Aqueous Aluminum Batteries