Abstract:As an energy storage system, Li-ion batteries are not safe because they use flammable organic electrolytes. A safer alternative is rechargeable Zn-based batteries with aqueous electrolytes. Among them, Zn-air batteries have high theoretical volumetric energy density (4400 Wh/L), which can even compete with lithium-sulfur batteries. Alkaline electrolyte is preferable for Zn-air batteries. However, the performance of Zn anodes in alkaline electrolyte is limited by passivation, dissolution and hydrogen evolution. Through SEM investigation, critical passivation size was found to be ~ 2 µm. Sub-micron-sized Zn anodes won’t have passivation problem. As a result, we focus our research on nanoscale. However, Zn dissolution of nanosized anodes will be accelerated because of large electrode-electrolyte surface area. Thus, anode modification and protection are needed to alleviate the dissolution. We designed a (1) Zn mesh@GO anode (Fig. 1a): graphene oxide (GO) layers on the Zn mesh surface deliver electrons across insulating ZnO and can slow down the Zn dissolution; (2) lasagna-inspired ZnO@GO anode (Fig. 1b): ZnO nanoparticles encapsulated by GO can solve simultaneously the passivation and dissolution problems; (3) core-shell ZnO@TiN nanorod anode (Fig. 1c): thin and conformal TiN coating mitigates Zn dissolution, mechanically maintains the nanostructure, and delivers electron to nanorods. These coatings are ion selective, which allow permeation of OH- and water, and prevents loss of Zn active material through blocking bigger Zn(OH)4 2-. Hydrogen evolution is a competitive side reaction on the zinc anodes, which causes low efficiency of Zn based batteries. Two approaches are investigated to suppress hydrogen evolution, including (1) modify the anode with a hydrogen suppressive material: core-shell ZnO@TiO2 nanorod anode was made with hydrogen suppressive TiO2 coating, which solves hydrogen evolution, passivation and dissolution problems at the same time; (2) design a hydrogen evolution suppressive nanostructured alloy anode: Zn-Ag alloy with increased standard reduction potential was used, which is more competitive compared with hydrogen evolution and more stable in aqueous electrolyte. All of these anodes show superior performance compared with unmodified anodes. These anodes can be paired with air cathodes to make high energy Zn-air batteries. The nanoscale design principles here can potentially be applied to overcome intrinsic limitations of other battery materials. Figure 1

Zn-Al alloy as a new anode-metal of a zinc-air battery

Electrochemical Performance of Al-1Zn-0.1In-0.1Sn-0.5Mg-xMn (x = 0, 0.1, 0.2, 0.3) Alloys Used as the Anode of an Al-Air Battery

Zn–Sn Alloy Anode with Repressible Dendrite Grown and Meliorative Corrosion Resistance for Zn-air Battery

Zinc-tin Binary Alloy Interphase for Zinc Metal Batteries

Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Investigation of the Commercial Aluminum Alloys as Anode Materials for Alkaline Aluminum-air Batteries

An Enhanced-Performance Al-air Battery Optimizing the Alkaline Electrolyte with a Strong Lewis Acid ZnCl2

Discharge performance of Al-0.1Sn-0.1In-0.05Ga alloy for Al–air battery anodes

Alloying strategy to stabilize monocrystalline zinc anode under high utilization and working capacity

Dissolution of Nanoprecipitate on Aluminum-Alloy Anode for High Discharging Performance in Al Battery Applications

Lamella-nanostructured eutectic zinc–aluminum alloys as reversible and dendrite-free anodes for aqueous rechargeable batteries

Porous Zinc Anode Design for Zn-air Chemistry

Highly (002)-oriented ZnO in ZnO-N-C microflakes coating layer for stable zinc anode in zinc-air batteries

Surface-Alloyed Nanoporous Zinc as Reversible and Stable Anodes for High-Performance Aqueous Zinc-Ion Battery

Zinc Anode Design for Rechargeable Aqueous High-Energy Zn Batteries

Evaluation of Impurities in Aluminum Anodes for Al-Air Batteries

Enhancing the Electrochemical Performance of Al-Mg-Sn-Ga Alloy Anode for Al-Air Battery by Solution Treatment

Hypoeutectic Mg–Zn binary alloys as anode materials for magnesium-air batteries

Deeply Rechargeable and Hydrogen-Evolution-Suppressing Zinc Anode in Alkaline Aqueous Electrolyte